Technical Information & Details of the MEAN WELL PWM-60-24 LED Driver Output power: 60 W DC output voltage: 24 V DC Rated output current: 2.5 A Output type: Constant voltage PWM style output Dimming range: 0 – 100 % (3‑in‑1: 0–10 VDC, 10 V PWM signal, or resistance; DA/DA2: DALI/DALI‑2) PWM output frequency: approx. 1.47 kHz (Blank/DA) / 2.5 kHz (DA2) Overvoltage protection threshold: 28 – 34 V DC Setup / rise time: ≤ 500 ms, 80 ms @ 115 / 230 VAC (full load) Hold‑up time (typ.): approx. 16 ms @ 115 / 230 VAC (full load) Input voltage range: 90 – 305 V AC / 127 – 431 V DC, 47 – 63 Hz Power factor (typ.): PF > 0.97 @ 115 VAC, PF > 0.95 @ 230 VAC, PF > 0.92 @ 277 VAC (full load) Efficiency (typ.): approx. 89 % AC input current (typ.): 0.8 A @ 115 VAC / 0.4 A @ 230 VAC / 0.32 A @ 277 VAC Inrush current (typ.): cold start, 50 A @ 230 VAC (≈270 μs at 50 % Ipeak) Leakage current: < 0.25 mA @ 277 VAC Overload protection: 108 – 130 % of rated output power, hiccup mode, auto recovery Overvoltage protection: Shut down output voltage, re‑power on to recover Overtemperature protection: Shut down output voltage, re‑power on to recover (DA2: hiccup mode) Short‑circuit protection: Hiccup mode, auto recovery Operating temperature (case Tcase): −40 °C to +85 °C (see “Output load vs temperature” derating) Operating humidity: 20 – 95 % RH, non‑condensing Storage temperature / humidity: −40 °C to +80 °C, 10 – 95 % RH Temperature coefficient: ± 0.03 % / °C (0 – 50 °C) Vibration: 10 – 500 Hz, 5 G, 12 min./cycle, 72 min. along X, Y, Z axes Withstand voltage: 3.75 kVAC (input–output), 1.5 kVAC (input–DA), 1.5 kVAC (output–DA) Isolation resistance: > 100 MΩ @ 500 V DC, 25 °C, 70 % RH Safety standards: UL8750 (type “HL”, except DA), UL879 (12 V, 24 V Blank only), ENEC EN 61347‑1, EN 61347‑2‑13 (independent), EN 62384, BIS IS 15885 (Part 2/Sec 13; 12/24/48 Blank & 12/24‑DA2), EAC TP TC 004, GB19510.1, GB19510.14; IP67; suitable for emergency installations per EN 61347‑2‑13 Annex J (EL) DALI standards (DA/DA2): IEC 62386‑101/102/207/251, Device Type 6 (DT6) EMC emission: EN 55015, EN 61000‑3‑2 Class C (≥60 % load), EN 61000‑3‑3, GB/T 17743, GB17625.1, EAC TP TC 020 EMC immunity: EN 61000‑4‑2,3,4,5,6,8,11; EN 61547 (light industry level, surge Line–Line 2 kV), EAC TP TC 020 MTBF (typ.): 2,626,600 h (Telcordia SR‑332, 25 °C) / 227,100 h (MIL‑HDBK‑217F, 25 °C) Dimensions (L x W x H): 150 mm x 53 mm x 35 mm Weight: approx. 0.49 kg Case & protection: fully encapsulated plastic case, IP67, Class II/2 No‑load power consumption: < 0.5 W Design: 60 W constant‑voltage PWM LED driver, Class 2, LPS Information about the MEAN WELL PWM-60-24 The MEAN WELL PWM‑60‑24 is a 60 W constant‑voltage LED driver with a PWM‑style output, designed to maintain brightness homogeneity when driving 24 V LED strips and other constant‑voltage LED loads. Its PWM operation at approximately 1.47 kHz (Blank/DA) or 2.5 kHz (DA2) delivers smooth, flicker‑free dimming while preserving color consistency even at low dimming levels. With typical efficiency up to around 89 %, active power factor correction and a wide 90–305 V AC input range, the driver is energy‑efficient and suitable for global installations. The fully encapsulated IP67 housing, wide −40 to +85 °C case temperature range and comprehensive protection features (short‑circuit, overload, overvoltage, overtemperature) ensure robust operation in dry, damp and wet locations, including suitability for certain emergency lighting systems under EN 61347‑2‑13. The integrated 3‑in‑1 dimming interface (0–10 V, 10 V PWM signal, resistance) in the Blank version and optional DALI/DALI‑2 control (DA/DA2 types) provide excellent flexibility for modern lighting control and building automation. Combined with long lifetime ratings and extensive international safety and EMC certifications, the PWM‑60‑24 is a strong choice for 24‑V LED strip lighting, indoor and decorative lighting, architectural lighting and industrial LED applications that require reliable constant‑voltage PWM drivers.

Technical Information & Details of the MEAN WELL PWM-60-24KN LED Driver Output Power: 60 W Output Voltage: 24 V DC Output Current: 2.5 A Dimming Range: 0 – 100 % (PWM dimming) Minimum Dimming Level: 0.01 % PWM Output Frequency: 200 – 4,000 Hz, user‑changeable via ETS Input Voltage Range: 90 – 305 V AC / 127 – 431 V DC Input Frequency: 47 – 63 Hz Power Factor (typ.): > 0.97 @115 VAC, > 0.95 @230 VAC, > 0.92 @277 VAC (full load) Efficiency (typ.): approx. 89 % AC Input Current (typ.): 0.8 A @115 VAC / 0.4 A @230 VAC / 0.32 A @277 VAC Inrush Current (typ.): 50 A @230 VAC (cold start, twidth ≈350 μs, per NEMA 410) THD: < 20 % (≥60 % load @115 / 230 VAC; ≥75 % load @277 VAC) Standby Power Consumption: < 0.5 W Overload Protection: 108 – 130 % of rated power, hiccup mode, auto recovery Overvoltage Protection: shut down output, re‑power on to recover (typ. 28 – 34 V DC) Overtemperature Protection: shut down output, re‑power on to recover Short‑circuit Protection: hiccup mode, auto recovery Operating Temperature (case): −35 °C to +85 °C (derating according to “Output load vs. temperature” curve) Operating Humidity: 20 – 95 % RH, non‑condensing Storage Temperature / Humidity: −35 °C to +80 °C, 10 – 95 % RH Temperature Coefficient: ±0.03 % / °C (0 – 50 °C) Vibration Resistance: 10 – 500 Hz, 5 G, 12 min./cycle, 72 min. along each X, Y, Z axis Dielectric Strength: 3.75 kVAC (input–output) Isolation Resistance: > 100 MΩ @500 VDC, 25 °C, 70 % RH Safety Standards: ENEC EN 61347‑1, EN 61347‑2‑13, EN 62384 (independent), GB19510.1 / GB19510.14, BIS IS 15885 (Part 2/Sec 13 for 12/24 KN), EAC KNX Standards: Certified KNX protocol EMC Emission: EN 55015, EN 61000‑3‑2 Class C (≥60 % load), EN 61000‑3‑3, GB/T 17743, GB17625.1, EAC TP TC 020 EMC Immunity: EN 61000‑4‑2,3,4,5,6,8,11; EN 61547 (light industry level, 2 kV Line‑Line surge), EAC TP TC 020 MTBF (typ.): 2,135,200 h (Telcordia SR‑332, 25 °C) / 247,700 h (MIL‑HDBK‑217F, 25 °C) Dimensions (L x W x H): 150 mm x 53 mm x 35 mm Weight: approx. 0.45 kg Case & Protection: fully encapsulated plastic housing, IP67, Class II Cooling Method: fanless, free air convection Information about the MEAN WELL PWM-60-24KN The MEAN WELL PWM‑60‑24KN is a 60 W constant‑voltage LED driver with 24 V DC PWM‑style output and a fully integrated KNX interface, created for direct connection to KNX building automation systems without requiring a KNX‑DALI gateway. Its PWM constant‑voltage output allows 24 V LED strips and constant‑voltage LED lamps to maintain uniform brightness and colour appearance over long runs, even when dimmed deeply. Key strengths of the PWM‑60‑24KN include the very low minimum dimming level of 0.01 % and the user‑adjustable PWM frequency from 200 Hz up to 4 kHz via ETS, enabling setups that comply with IEEE 1789‑2015 “no risk” recommendations and EU Ecodesign SVM flicker limits. Combined with a typical efficiency of around 89 %, a wide 90–305 V AC input range and a fully potted IP67 plastic housing, the driver is well suited for long‑life installations in indoor architectural, decorative and ambient lighting applications where flicker and visual comfort are critical. The native KNX protocol support also stands out: the driver can be addressed and programmed in ETS, and the PWM KN series even supports ETS addressing/programming without AC mains connected, simplifying commissioning on site. Together with its broad case temperature range from −35 °C to +85 °C, robust protection features and international approvals, the PWM‑60‑24KN offers a compact, reliable KNX‑centrical solution for 24 V LED strip lighting, indoor LED lighting and constant‑voltage LED bulbs in smart building projects.

Technical Information & Details of the MEAN WELL PWM-40-24 LED Driver Output power: 40.08 W DC output voltage: 24 V DC Rated output current: 1.67 A Output type: Constant voltage PWM style output Dimming range: 0 – 100 % (3‑in‑1: 0–10 VDC, 10 V PWM signal, or resistance) PWM output frequency: approx. 1.47 kHz Overvoltage protection threshold: 28 – 34 V DC Setup / rise time: ≤ 500 ms, 80 ms @ 115 / 230 VAC (full load) Hold‑up time (typ.): approx. 16 ms @ 115 / 230 VAC (full load) Input voltage range: 90 – 305 V AC / 127 – 431 V DC, 47 – 63 Hz Power factor (typ.): PF > 0.97 @ 115 VAC, PF > 0.95 @ 230 VAC, PF > 0.92 @ 277 VAC (full load) Efficiency (typ.): approx. 89 % AC input current (typ.): 0.6 A @ 115 VAC / 0.3 A @ 230 VAC / 0.25 A @ 277 VAC Inrush current (typ.): cold start, 50 A @ 230 VAC (≈270 μs at 50 % Ipeak) Leakage current: < 0.25 mA @ 277 VAC Overload protection: 108 – 130 % of rated output power, hiccup mode, auto recovery Overvoltage protection: Shut down output voltage, re‑power on to recover Overtemperature protection: Shut down output voltage, re‑power on to recover Short‑circuit protection: Hiccup mode, auto recovery Operating temperature (case Tcase): −40 °C to +85 °C (see “Output load vs temperature” derating) Operating humidity: 20 – 95 % RH, non‑condensing Storage temperature / humidity: −40 °C to +80 °C, 10 – 95 % RH Temperature coefficient: ± 0.03 % / °C (0 – 50 °C) Vibration: 10 – 500 Hz, 5 G, 12 min./cycle, 72 min. along X, Y, Z axes Withstand voltage: 3.75 kVAC between input and output Isolation resistance: > 100 MΩ @ 500 V DC, 25 °C, 70 % RH Safety standards: UL8750 (type “HL”), UL879 (12 V, 24 V), CSA C22.2 No. 250.13‑12, ENEC EN 61347‑1, EN 61347‑2‑13 (independent), EN 62384, IS 15885 (12 V, 24 V), EAC TP TC 004, GB19510.1, GB19510.14; IP67 EMC emission: EN 55015, EN 61000‑3‑2 Class C (≥60 % load), EN 61000‑3‑3, GB/T 17743, GB17625.1, EAC TP TC 020 EMC immunity: EN 61000‑4‑2,3,4,5,6,8,11; EN 61547 (light industry level, surge Line–Line 2 kV), EAC TP TC 020 MTBF (typ.): 2,625,400 h (Telcordia SR‑332, 25 °C) / 226,400 h (MIL‑HDBK‑217F, 25 °C) Dimensions (L x W x H): 150 mm x 53 mm x 35 mm Weight: approx. 0.49 kg Case & protection: fully encapsulated plastic case, IP67, Class II No‑load power consumption: < 0.5 W Design: constant‑voltage PWM LED driver, Class 2, LPS Information about the MEAN WELL PWM-40-24 The MEAN WELL PWM‑40‑24 is a 40 W constant‑voltage LED driver with a PWM‑style output at around 1.47 kHz, designed to keep LED strip color temperature and brightness uniform throughout the entire dimming range. This makes it a strong choice for 24 V LED strips, indoor accent lighting, and architectural or decorative LED projects where visual consistency is essential. With typical efficiency up to 89 %, active power factor correction and a wide 90–305 V AC input range, the driver operates efficiently and can be deployed in worldwide installations. The fully encapsulated IP67 housing, wide −40 to +85 °C case temperature rating and comprehensive protection features (short‑circuit, overload, overvoltage and overtemperature in hiccup/shutdown mode) provide reliable operation in dry, damp and wet locations. The integrated 3‑in‑1 dimming interface (0–10 V, 10 V PWM signal, resistance) with dim‑to‑off capability offers excellent flexibility for modern control systems and building automation. Combined with extensive international safety and EMC certifications (including type “HL” for use in Class I, Division 2 hazardous locations), the PWM‑40‑24 is ideally suited for professional 24 V LED strip lighting in commercial and industrial environments.

Not approved as an LED driver within the EU! An approved alternative is, for example, the LPF-60 series. Technical Information & Details of the MEAN WELL LPV-60-24 Power Supply Output Power: 60 W Output Voltage: 24 V DC Output Current: 2.5 A Input Voltage Range: 90 – 264 V AC / 127 – 370 V DC, 47 – 63 Hz Efficiency: up to 86 % Ripple & Noise: ≤ 150 mVp-p Inrush Current: max. 60 A @230 VAC No-load Power Consumption: < 0.5 W Operating Temperature: −30 °C to +70 °C Cooling: fanless natural convection Protection Features: Short-circuit, Overload, Overvoltage Overvoltage Category: OVC III Isolation Voltage: 3000 V AC between input and output Dimensions (H x W x D): 32 mm x 42.5 mm x 162.5 mm Weight: approx. 420 g Safety & EMC Certificates: CE, UL1310, TUV, CB, EAC, IP67 LED Indicator: - Manufacturer Warranty: 2 years Information about the MEAN WELL LPV-60-24 The MEAN WELL LPV-60-24 is a powerful LED power supply with 60 W and stable 24 V DC / 2.5 A output voltage. It excels with excellent efficiency up to 86 %, fanless convection cooling for silent operation, and a fully waterproof IP67 housing. The comprehensive protection features (short-circuit, overload, and overvoltage protection) with automatic recovery ensure maximum operational safety. Perfect for LED strips, modules, outdoor lighting, and humid environments – the universal input voltage range 90–264 V AC enables worldwide deployment. With international certifications, the LPV-60-24 offers maximum flexibility, durability, and weatherproof protection in demanding environments.

Not approved as an LED driver within the EU! An approved alternative is, for example, the LPF-25 series. Technical Information & Details of the MEAN WELL LPV-35-24 Power Supply Output Power: 36 W Output Voltage: 24 V DC Output Current: 1.5 A Input Voltage Range: 90 – 264 V AC / 127 – 370 V DC, 47 – 63 Hz Efficiency: up to 85 % Ripple & Noise: ≤ 150 mVp-p Inrush Current: max. 55 A @230 VAC No-load Power Consumption: < 0.5 W Operating Temperature: −30 °C to +75 °C Cooling: fanless natural convection Protection Features: Short-circuit, Overload, Overvoltage Overvoltage Category: OVC III Isolation Voltage: 3000 V AC between input and output Dimensions (H x W x D): 30 mm x 40 mm x 148 mm Weight: approx. 340 g Safety & EMC Certificates: CE, UL1310, TUV, CB, EAC, IP67 LED Indicator: - Manufacturer Warranty: 2 years Information about the MEAN WELL LPV-35-24 The MEAN WELL LPV-35-24 is a compact LED power supply with 36 W and stable 24 V DC / 1.5 A output voltage. It excels with excellent efficiency up to 85 %, fanless convection cooling for silent operation, and a fully waterproof IP67 housing. The comprehensive protection features (short-circuit, overload, and overvoltage protection) with automatic recovery ensure maximum operational safety. Perfect for LED strips, camera systems, decorative applications, and humid environments – the universal input voltage range 90–264 V AC enables worldwide deployment. With international certifications, the LPV-35-24 offers maximum flexibility, durability, and weatherproof protection in demanding environments.