In: 100-305VAC 47-63Hz  142-431VDCOut: 24VDC / dim range: 0-100% / Max. 199,2W / 8,3A / Eff. 93% / 195x68x39,5mm

Technical Information & Details of the MEAN WELL PWM-60-24DA LED Driver Output Power: 60 W Output Voltage: 24 V DC Output Current: 2.5 A Dimming Range: 0 – 100 % (PWM dimming, DALI / DALI‑2 control) PWM Output Frequency: approx. 1.47 kHz (DA type), approx. 2.5 kHz (DA2 type) Dimming Interface: DALI or DALI‑2 (depending on DA / DA2 version); 3‑in‑1 dimming (0–10 VDC, 10 V PWM signal, resistance) available on Blank type Input Voltage Range: 90 – 305 V AC / 127 – 431 V DC Input Frequency: 47 – 63 Hz Power Factor (typ.): > 0.97 @115 VAC, > 0.95 @230 VAC, > 0.92 @277 VAC (full load) Efficiency (typ.): approx. 89 % AC Input Current (typ.): 0.8 A @115 VAC / 0.4 A @230 VAC / 0.32 A @277 VAC Inrush Current (typ.): 50 A @230 VAC (cold start, twidth ≈270 μs) THD: < 20 % (≥60 % load @115 / 230 VAC; ≥75 % load @277 VAC) No‑load Power Consumption: < 0.5 W Overload Protection: 108 – 130 % of rated power, hiccup mode, auto recovery Overvoltage Protection: shut down output, re‑power on to recover (typ. 28 – 34 V DC) Overtemperature Protection: shut down output, re‑power on to recover (DA2 type in hiccup mode) Short‑circuit Protection: hiccup mode, auto recovery Operating Temperature (case): −40 °C to +85 °C (derating according to curve) Operating Humidity: 20 – 95 % RH, non‑condensing Storage Temperature / Humidity: −40 °C to +80 °C, 10 – 95 % RH Temperature Coefficient: ±0.03 % / °C (0 – 50 °C) Vibration Resistance: 10 – 500 Hz, 5 G, 12 min./cycle, 72 min. in each X, Y, Z axis Dielectric Strength: 3.75 kVAC (input–output), 1.5 kVAC (input–DA), 1.5 kVAC (output–DA) Isolation Resistance: > 100 MΩ @500 VDC, 25 °C, 70 % RH Safety Standards: UL8750 (type “HL”, except DA type), UL879 (12/24 V Blank), ENEC EN 61347‑1, EN 61347‑2‑13 (independent), EN 62384, BIS IS 15885 (12/24/48 V Blank & 12/24‑DA2), EAC, GB19510.1 / GB19510.14; design reference EN 60335‑1; suitable for EL applications according to EN 61347‑2‑13 Annex J DALI Standards (DA / DA2): IEC 62386‑101, 102, 207, 251, device type DT6 EMC Emission: EN 55015, EN 61000‑3‑2 Class C (≥60 % load), EN 61000‑3‑3, GB/T 17743, GB17625.1, EAC TP TC 020 EMC Immunity: EN 61000‑4‑2,3,4,5,6,8,11; EN 61547 (light industry level, 2 kV Line‑Line surge), EAC TP TC 020 MTBF (typ.): 2,626,600 h (Telcordia SR‑332, 25 °C) / 227,100 h (MIL‑HDBK‑217F, 25 °C) Dimensions (L x W x H): 150 mm x 53 mm x 35 mm Weight: approx. 0.49 kg Case & Protection: fully encapsulated plastic housing, IP67, Class II, Class 2, LPS Cooling Method: fanless, free air convection Information about the MEAN WELL PWM-60-24DA The MEAN WELL PWM‑60‑24DA is a 60 W constant‑voltage LED driver with 24 V DC output and PWM‑style regulation, tailored for medium‑voltage LED strips and 24 V LED modules in DALI‑ or DALI‑2‑based lighting systems. Its PWM output helps maintain consistent brightness and colour appearance along longer runs of 24 V strips, even when they are dimmed down to low levels. This model’s strengths include its solid typical efficiency around 89 %, the wide 90–305 V AC input range with active power factor correction, and the fully potted IP67 enclosure that supports use in dry, damp and wet locations. The wide case temperature range from −40 °C to +85 °C, together with robust protection features (short‑circuit, overload, overvoltage, overtemperature), makes the PWM‑60‑24DA a reliable option for both indoor and outdoor architectural, commercial and industrial lighting projects. A distinctive characteristic of the PWM‑60‑24DA is its native DALI / DALI‑2 support (device type DT6), which enables precise, addressable dimming and grouping in modern building management and lighting control systems. Combined with its long MTBF, comprehensive safety and EMC certifications, and constant‑voltage PWM behaviour optimised for 24 V LED strips, this driver is well suited for cove lighting, linear accent lighting, signage and other 24 V LED applications where stable dimming and centralised DALI control are key requirements.

Technical Information & Details for MEAN WELL PWM-90-24 LED Driver Output power: 90 W Output voltage: 24 V DC Rated output current: 3.75 A Output current range: 0 – 3.75 A (PWM‑modulated constant voltage output) Output type: Constant voltage, PWM style output Dimming range: 0 – 100% (3‑in‑1 dimming) Dimming interfaces: 0–10 V DC, 10 V PWM signal (100 Hz – 3 kHz), resistive dimming PWM frequency: approx. 1.47 kHz (Blank / DA type), 2.5 kHz (DA2 type) No‑load power consumption: < 0.5 W Input voltage range: 90 – 305 V AC / 127 – 431 V DC, 47 – 63 Hz AC input current (typical): 0.95 A @ 115 V AC / 0.5 A @ 230 V AC / 0.4 A @ 277 V AC Power factor (typical): > 0.98 @ 115 V AC, > 0.96 @ 230 V AC, > 0.92 @ 277 V AC (full load) Efficiency (typical): ≈ 90.5% Total harmonic distortion (THD): < 20% (≥ 60% load @ 115/230 V AC, ≥ 75% load @ 277 V AC) Inrush current (cold start): 60 A @ 230 V AC (twidth ≈ 550 µs, 50% Ipeak) Leakage current: < 0.25 mA @ 277 V AC Overload protection: 108 – 130% of rated output power, hiccup mode, automatic recovery Over‑voltage protection: ≈ 28 – 34 V DC, shutdown, re‑power on to recover Over‑temperature protection: output shutdown, re‑power on to recover after cooling Operating temperature (case range): −40 °C to +85 °C (see “output load vs. temperature” derating curve) Maximum case temperature (T-case max): +85 °C Operating humidity: 20 – 95% RH, non‑condensing Storage temperature & humidity: −40 °C to +80 °C, 10 – 95% RH Ingress protection: IP67, fully encapsulated Case material: fully isolated plastic housing Insulation class: Class II (no protective earth connection) Dielectric strength: input–output: 3.75 kV AC; input–DA: 1.5 kV AC; output–DA: 1.5 kV AC (DA/DA2 types) Insulation resistance: > 100 MΩ @ 500 V DC, 25 °C, 70% RH Vibration: 10 – 500 Hz, 5 G, 12 min./cycle, 72 min. per axis (X, Y, Z) MTBF: ≈ 2.39 million h (Telcordia SR‑332, 25 °C) Dimensions (L x W x H): 171 mm x 63 mm x 37.5 mm Weight: ≈ 0.77 kg Primary connections: AC/L (brown), AC/N (blue), pre‑wired input cable Secondary connections: Vo+ (red), Vo− (black), dimming / DALI leads (purple, pink depending on type) Recommended mounting: horizontal mounting, case type PWM‑90P, free air convection Safety standards: UL 8750 (except DA type), CSA C22.2 No. 250.13‑12, ENEC EN 61347‑1 / EN 61347‑2‑13 (independent), EN 62384, BIS IS 15885 (for 12/24/48 V blank and DA2 types), EAC, GB19510.1 / GB19510.14 EMC standards: EN 55015, EN 61000‑3‑2 Class C (from 60% load), EN 61000‑3‑3, EN 61547, EN 61000‑4‑2/3/4/5/6/8/11, GB/T 17743, GB 17625.1 DALI (DA / DA2 types): IEC 62386‑101/102/207/251, Device Type 6 (DT6), 16 groups / 64 addresses (DA/DA2 only) Lifetime: typ. > 50,000 h at T-case ≈ 75 °C Warranty: 5 years Information about MEAN WELL PWM-90-24 The MEAN WELL PWM‑90‑24 is a 90 W AC/DC LED driver with constant voltage PWM output that maintains uniform brightness across 24 V LED strips, even when several runs are connected in parallel and dimmed. With its 90–305 V AC wide input range, high efficiency around 90.5%, IP67 potted construction and case temperature rating from −40 °C to +85 °C, it is designed for robust, fanless operation in demanding indoor and protected outdoor installations. The integrated 3‑in‑1 dimming (0–10 V, PWM, resistance), optional DALI/DALI‑2 control, active PFC and long service life make the PWM‑90‑24 a strong choice for professional 24 V LED strip, decorative, architectural and industrial lighting systems requiring precise dimming and reliable 24/7 operation.

40W Multiple Stage Konstantstrom Modus LED Treiber 40W Multiple Stage Constant Current Mode LED Driver In: 180-295VAC 47-63Hz 254-417VDC / KNX und PUSH / Eff. 91% / 124x82x23mmOut: 350mA (2-100V) / 500 (2-80) / 600 (2-67) / 700 (2-57) / 900 (2-45) / 1050 (2-40) Der Konstantstrom kann auch auf Zwischenwerte an der NTC-Klemme eingestellt werden !

Discontinued Product see replacement: LCM-40DA2