Technical Information & Details of the MEAN WELL PWM-60-24 LED Driver Output power: 60 W DC output voltage: 24 V DC Rated output current: 2.5 A Output type: Constant voltage PWM style output Dimming range: 0 – 100 % (3‑in‑1: 0–10 VDC, 10 V PWM signal, or resistance; DA/DA2: DALI/DALI‑2) PWM output frequency: approx. 1.47 kHz (Blank/DA) / 2.5 kHz (DA2) Overvoltage protection threshold: 28 – 34 V DC Setup / rise time: ≤ 500 ms, 80 ms @ 115 / 230 VAC (full load) Hold‑up time (typ.): approx. 16 ms @ 115 / 230 VAC (full load) Input voltage range: 90 – 305 V AC / 127 – 431 V DC, 47 – 63 Hz Power factor (typ.): PF > 0.97 @ 115 VAC, PF > 0.95 @ 230 VAC, PF > 0.92 @ 277 VAC (full load) Efficiency (typ.): approx. 89 % AC input current (typ.): 0.8 A @ 115 VAC / 0.4 A @ 230 VAC / 0.32 A @ 277 VAC Inrush current (typ.): cold start, 50 A @ 230 VAC (≈270 μs at 50 % Ipeak) Leakage current: < 0.25 mA @ 277 VAC Overload protection: 108 – 130 % of rated output power, hiccup mode, auto recovery Overvoltage protection: Shut down output voltage, re‑power on to recover Overtemperature protection: Shut down output voltage, re‑power on to recover (DA2: hiccup mode) Short‑circuit protection: Hiccup mode, auto recovery Operating temperature (case Tcase): −40 °C to +85 °C (see “Output load vs temperature” derating) Operating humidity: 20 – 95 % RH, non‑condensing Storage temperature / humidity: −40 °C to +80 °C, 10 – 95 % RH Temperature coefficient: ± 0.03 % / °C (0 – 50 °C) Vibration: 10 – 500 Hz, 5 G, 12 min./cycle, 72 min. along X, Y, Z axes Withstand voltage: 3.75 kVAC (input–output), 1.5 kVAC (input–DA), 1.5 kVAC (output–DA) Isolation resistance: > 100 MΩ @ 500 V DC, 25 °C, 70 % RH Safety standards: UL8750 (type “HL”, except DA), UL879 (12 V, 24 V Blank only), ENEC EN 61347‑1, EN 61347‑2‑13 (independent), EN 62384, BIS IS 15885 (Part 2/Sec 13; 12/24/48 Blank & 12/24‑DA2), EAC TP TC 004, GB19510.1, GB19510.14; IP67; suitable for emergency installations per EN 61347‑2‑13 Annex J (EL) DALI standards (DA/DA2): IEC 62386‑101/102/207/251, Device Type 6 (DT6) EMC emission: EN 55015, EN 61000‑3‑2 Class C (≥60 % load), EN 61000‑3‑3, GB/T 17743, GB17625.1, EAC TP TC 020 EMC immunity: EN 61000‑4‑2,3,4,5,6,8,11; EN 61547 (light industry level, surge Line–Line 2 kV), EAC TP TC 020 MTBF (typ.): 2,626,600 h (Telcordia SR‑332, 25 °C) / 227,100 h (MIL‑HDBK‑217F, 25 °C) Dimensions (L x W x H): 150 mm x 53 mm x 35 mm Weight: approx. 0.49 kg Case & protection: fully encapsulated plastic case, IP67, Class II/2 No‑load power consumption: < 0.5 W Design: 60 W constant‑voltage PWM LED driver, Class 2, LPS Information about the MEAN WELL PWM-60-24 The MEAN WELL PWM‑60‑24 is a 60 W constant‑voltage LED driver with a PWM‑style output, designed to maintain brightness homogeneity when driving 24 V LED strips and other constant‑voltage LED loads. Its PWM operation at approximately 1.47 kHz (Blank/DA) or 2.5 kHz (DA2) delivers smooth, flicker‑free dimming while preserving color consistency even at low dimming levels. With typical efficiency up to around 89 %, active power factor correction and a wide 90–305 V AC input range, the driver is energy‑efficient and suitable for global installations. The fully encapsulated IP67 housing, wide −40 to +85 °C case temperature range and comprehensive protection features (short‑circuit, overload, overvoltage, overtemperature) ensure robust operation in dry, damp and wet locations, including suitability for certain emergency lighting systems under EN 61347‑2‑13. The integrated 3‑in‑1 dimming interface (0–10 V, 10 V PWM signal, resistance) in the Blank version and optional DALI/DALI‑2 control (DA/DA2 types) provide excellent flexibility for modern lighting control and building automation. Combined with long lifetime ratings and extensive international safety and EMC certifications, the PWM‑60‑24 is a strong choice for 24‑V LED strip lighting, indoor and decorative lighting, architectural lighting and industrial LED applications that require reliable constant‑voltage PWM drivers.

Technische Eigenschaften des MEAN WELL LCM-40 Konstantstromlevel: 350mA~1050mA Eingangsbereich: 180~295VAC Konstantstromausgangsmodus; verschiedene Stufen frei wählbar über DIP-Schalter Plastikgehäuse im Class II Design Eingebaute aktive PFC-Funktion Standby Ladeverbrauch <1W Betriebstemperaturbereich: -30°C~+90°C Effizienz bis zu 91% Funktionen: 2 in 1 Dimmfunktion (0~10Vdc, 10V PWM Signal), Synchronisierung mit bis zu 10 Einheiten möglich Geeignet für LED Innenbeleuchtungen, LED Bürobeleuchtungen, LED-Plattenbeleuchtungen 3 Jahre Garantie Weitere Informationen zu den MEAN WELL LCM LED-Netzteilen Die MEAN WELL Produktlinien LCM-25/-40/-60 und LCM-25DA/-40DA/-60DA sind LED-Treiber mit einem Konstantstromausgangsmodus, welcher über einen DIP-Schalter einstellbar ist. Die DA-Versionen besitzen zudem eine DALI-Schnittstelle und sind mit IEC62386-207 konform. Die LCM Netzteile können im Eingangsbereich von 180~277VAC (LCM-25, LCM-25DA) bzw. 180~295VAC (LCM-40, LCM-40DA, LCM-60, LCM-60DA) betrieben werden und liefern einen konstanten, einstellbaren Ausgangsstrom im Bereich von 350mA bis zu 1400mA. Dank der hohen Effizienz (86-92%) und dem lüfterlosem Design, kann die Produktserie unter freier Luftkonvektion in einem Betriebstemperaturbereich von -30°C bis 90°C betrieben werden. Darüber hinaus besitzen die LCM Netzteile in der Standard-Version eine 2 in 1 Dimmfunktion (0~10Vdc, 10V PWM Signal), während die DA-Versionen mit einer DALI-Schnittstelle und Push Dimming ausgestattet sind. Zudem kann die LCM-Serie mit bis zu 10 Einheiten synchronisiert werden, wobei nur eine DA-Version zur Steuerung benötigt wird. Dies alles macht die MEAN WELL LCM Produktlinie zur einer vielseitig und flexibel einsetzbaren Netzteilserie, die in vielen LED Beleuchtungsanwendungen eingesetzt werden kann. 40W Multiple Stage Konstantstrom Modus LED Treiber 40W Multiple Stage Constant Current Mode LED Driver In: 180-295VAC 47-63Hz 254-417VDC / 3in1 ( 0-10V, PWM Signal, POTI) / Eff. 91% / 124x82x23mmOut: 350mA (2-100V) / 500 (2-80) / 600 (2-67) / 700 (2-57) / 900 (2-45) / 1050 (2-40) Der Konstantstrom kann auch auf Zwischenwerte an der NTC-Klemme eingestellt werden !

350mA /3~10.5VDC Konstntstrom Netzteile 350mA /3~10.5VDC Constant Current Power Supply Auslaufmodell siehe Nachfolger SS5-3C350

Technical Information & Details on MEAN WELL PWM-120-24 Power Supply Output Power: 120 W Output Voltage: 24 V DC Output Current: 5 A Input Voltage Range: 90 – 305 V AC / 127 – 431 V DC, 47 – 63 Hz Efficiency: up to 90 % PWM Frequency: 1.47 kHz Inrush Current: typ. 60 A / 50 µs @ 230 VAC No-Load Power Consumption: < 0.5 W Operating Temperature: −40 °C to +80 °C Cooling: natural convection Protection Functions: Short circuit (Hiccup mode), Overload, Overvoltage, Over temperature Overvoltage Category: II Isolation Voltage: 3.75 kV AC between input and output Dimensions (L x W x H): 191 mm x 63 mm x 37.5 mm Weight: approx. 0.97 kg Safety & EMC Certifications: UL8750, ENEC EN61347-1/-2-13, EAC, CB, IP67 Dimming: 3-in-1 (0-10V, PWM, Resistance) MTBF: > 2243.7k hours (Telcordia SR-332) Manufacturer Warranty: 5 years Information on MEAN WELL PWM-120-24 This PWM LED driver excels with its extremely wide operating range (−40 °C to +80 °C), IP67 waterproofing for outdoor use, and high efficiency up to 90 % with low no-load consumption. Unique features include flexible 3-in-1 dimming, automatic fault recovery, and superior vibration resistance for enduring performance. The MEAN WELL PWM-120 series is a high-performance 120 W PWM output LED driver power supply with waterproof IP67 housing, designed for demanding outdoor and industrial applications. The PWM-120-24 model delivers stable 24 V DC / 5 A output power with an extremely wide input voltage range of 90–305 V AC. It is ideal for LED lighting, street lamps, industrial LEDs, and weather-exposed installations, backed by comprehensive certifications and a 5-year manufacturer warranty.