PWM-60-24DA

Quantity	Unit price
from 1	€24.96*
from 5	€24.03*
from 10	€23.11*
from 20	€22.55*

Prices excl. VAT plus shipping costs zzgl. Versandkosten

No longer available

Product number: 200914

Product information "PWM-60-24DA"

Technical Information & Details of the MEAN WELL PWM-60-24DA LED Driver

Output Power: 60 W
Output Voltage: 24 V DC
Output Current: 2.5 A
Dimming Range: 0 – 100 % (PWM dimming, DALI / DALI‑2 control)
PWM Output Frequency: approx. 1.47 kHz (DA type), approx. 2.5 kHz (DA2 type)
Dimming Interface: DALI or DALI‑2 (depending on DA / DA2 version); 3‑in‑1 dimming (0–10 VDC, 10 V PWM signal, resistance) available on Blank type
Input Voltage Range: 90 – 305 V AC / 127 – 431 V DC
Input Frequency: 47 – 63 Hz
Power Factor (typ.): > 0.97 @115 VAC, > 0.95 @230 VAC, > 0.92 @277 VAC (full load)
Efficiency (typ.): approx. 89 %
AC Input Current (typ.): 0.8 A @115 VAC / 0.4 A @230 VAC / 0.32 A @277 VAC
Inrush Current (typ.): 50 A @230 VAC (cold start, twidth ≈270 μs)
THD: < 20 % (≥60 % load @115 / 230 VAC; ≥75 % load @277 VAC)
No‑load Power Consumption: < 0.5 W
Overload Protection: 108 – 130 % of rated power, hiccup mode, auto recovery
Overvoltage Protection: shut down output, re‑power on to recover (typ. 28 – 34 V DC)
Overtemperature Protection: shut down output, re‑power on to recover (DA2 type in hiccup mode)
Short‑circuit Protection: hiccup mode, auto recovery
Operating Temperature (case): −40 °C to +85 °C (derating according to curve)
Operating Humidity: 20 – 95 % RH, non‑condensing
Storage Temperature / Humidity: −40 °C to +80 °C, 10 – 95 % RH
Temperature Coefficient: ±0.03 % / °C (0 – 50 °C)
Vibration Resistance: 10 – 500 Hz, 5 G, 12 min./cycle, 72 min. in each X, Y, Z axis
Dielectric Strength: 3.75 kVAC (input–output), 1.5 kVAC (input–DA), 1.5 kVAC (output–DA)
Isolation Resistance: > 100 MΩ @500 VDC, 25 °C, 70 % RH
Safety Standards: UL8750 (type “HL”, except DA type), UL879 (12/24 V Blank), ENEC EN 61347‑1, EN 61347‑2‑13 (independent), EN 62384, BIS IS 15885 (12/24/48 V Blank & 12/24‑DA2), EAC, GB19510.1 / GB19510.14; design reference EN 60335‑1; suitable for EL applications according to EN 61347‑2‑13 Annex J
DALI Standards (DA / DA2): IEC 62386‑101, 102, 207, 251, device type DT6
EMC Emission: EN 55015, EN 61000‑3‑2 Class C (≥60 % load), EN 61000‑3‑3, GB/T 17743, GB17625.1, EAC TP TC 020
EMC Immunity: EN 61000‑4‑2,3,4,5,6,8,11; EN 61547 (light industry level, 2 kV Line‑Line surge), EAC TP TC 020
MTBF (typ.): 2,626,600 h (Telcordia SR‑332, 25 °C) / 227,100 h (MIL‑HDBK‑217F, 25 °C)
Dimensions (L x W x H): 150 mm x 53 mm x 35 mm
Weight: approx. 0.49 kg
Case & Protection: fully encapsulated plastic housing, IP67, Class II, Class 2, LPS
Cooling Method: fanless, free air convection

Information about the MEAN WELL PWM-60-24DA

The MEAN WELL PWM‑60‑24DA is a 60 W constant‑voltage LED driver with 24 V DC output and PWM‑style regulation, tailored for medium‑voltage LED strips and 24 V LED modules in DALI‑ or DALI‑2‑based lighting systems. Its PWM output helps maintain consistent brightness and colour appearance along longer runs of 24 V strips, even when they are dimmed down to low levels.

This model’s strengths include its solid typical efficiency around 89 %, the wide 90–305 V AC input range with active power factor correction, and the fully potted IP67 enclosure that supports use in dry, damp and wet locations. The wide case temperature range from −40 °C to +85 °C, together with robust protection features (short‑circuit, overload, overvoltage, overtemperature), makes the PWM‑60‑24DA a reliable option for both indoor and outdoor architectural, commercial and industrial lighting projects.

A distinctive characteristic of the PWM‑60‑24DA is its native DALI / DALI‑2 support (device type DT6), which enables precise, addressable dimming and grouping in modern building management and lighting control systems. Combined with its long MTBF, comprehensive safety and EMC certifications, and constant‑voltage PWM behaviour optimised for 24 V LED strips, this driver is well suited for cove lighting, linear accent lighting, signage and other 24 V LED applications where stable dimming and centralised DALI control are key requirements.

Weiterführende Links zu "PWM-60-24DA"

Fragen zum Artikel?
Weitere Artikel von MEAN WELL

Verfügbare Downloads

Download PWM-60 Datenblatt

Eigenschaften für "PWM-60-24DA"

Breite:	53
Dimming:	DALI dimmung
Effizienz:	89
Gewicht:	0,53kg
Herstellergarantie:	Five years
Höhe:	35
Länge:	150
Power:	60
Protection class:	Class 2
Rated current:	2,5
Schutzart:	IP67
Voltage:	24 VDC
Zulassungen:	CB, CE, ENEC, MM, SELV, UL

Similar Items

PWM-60-24DA2

Technical Information & Details of the MEAN WELL PWM-60-24DA2 LED Driver Output Power: 60 W Output Voltage: 24 V DC Output Current: 2.5 A Dimming Range: 0 – 100 % (PWM dimming, DALI‑2 control) PWM Output Frequency: approx. 2.5 kHz (DA2 type, fixed) Dimming Interface: DALI‑2 primary‑side interface (DA+ / DA−, no polarity), 16 groups, 64 addresses, first step fixed at 0.2 % of output Input Voltage Range: 90 – 305 V AC / 127 – 431 V DC Input Frequency: 47 – 63 Hz Power Factor (typ.): > 0.97 @115 VAC, > 0.95 @230 VAC, > 0.92 @277 VAC (full load) Efficiency (typ.): approx. 89 % AC Input Current (typ.): 0.8 A @115 VAC / 0.4 A @230 VAC / 0.32 A @277 VAC Inrush Current (typ.): 50 A @230 VAC (cold start, twidth ≈270 μs, per NEMA 410) THD: < 20 % (≥60 % load @115 / 230 VAC; ≥75 % load @277 VAC) No‑load Power Consumption: < 0.5 W Overload Protection: 108 – 130 % of rated power, hiccup mode (DA2 type), auto recovery (see static characteristic) Overvoltage Protection: shut down output, re‑power on to recover (typ. 28 – 34 V DC) Overtemperature Protection: shut down output, re‑power on to recover (DA2 type in hiccup‑like behaviour) Short‑circuit Protection: hiccup mode, auto recovery Operating Temperature (case): −40 °C to +85 °C (derating according to “Output load vs. temperature” curve) Operating Humidity: 20 – 95 % RH, non‑condensing Storage Temperature / Humidity: −40 °C to +80 °C, 10 – 95 % RH Temperature Coefficient: ±0.03 % / °C (0 – 50 °C) Vibration Resistance: 10 – 500 Hz, 5 G, 12 min./cycle, 72 min. along each X, Y, Z axis Dielectric Strength: 3.75 kVAC (input–output), 1.5 kVAC (input–DA), 1.5 kVAC (output–DA) Isolation Resistance: > 100 MΩ @500 VDC, 25 °C, 70 % RH Safety Standards: UL8750 (type “HL”, except DA type), UL879 (12/24 V Blank), ENEC EN 61347‑1, EN 61347‑2‑13 (independent), EN 62384, BIS IS 15885 (12/24/48 V Blank & 12/24‑DA2), EAC, GB19510.1 / GB19510.14; design reference EN 60335‑1; suitable for emergency lighting (EL) according to EN 61347‑2‑13 Annex J DALI Standards (DA2): IEC 62386‑101, 102, 207, 251, device type DT6 (for DA/DA2 types only) EMC Emission: EN 55015, EN 61000‑3‑2 Class C (≥60 % load), EN 61000‑3‑3, GB/T 17743, GB17625.1, EAC TP TC 020 EMC Immunity: EN 61000‑4‑2,3,4,5,6,8,11; EN 61547 (light industry level, 2 kV Line‑Line surge), EAC TP TC 020 MTBF (typ.): 2,626,600 h (Telcordia SR‑332, 25 °C) / 227,100 h (MIL‑HDBK‑217F, 25 °C) Dimensions (L x W x H): 150 mm x 53 mm x 35 mm Weight: approx. 0.49 kg Case & Protection: fully encapsulated plastic housing, IP67, Class II, Class 2, LPS Cooling Method: fanless, free air convection Information about the MEAN WELL PWM-60-24DA2 The MEAN WELL PWM‑60‑24DA2 is a 60 W constant‑voltage LED driver with 24 V DC output and high‑frequency 2.5 kHz PWM dimming, designed for DALI‑2‑controlled 24 V LED strip and module installations. The constant‑voltage PWM output ensures very uniform brightness and colour across the entire strip, which is especially beneficial for longer runs of 24 V linear lighting in visually demanding projects. Its technical strengths include a typical efficiency of around 89 %, a wide 90–305 V AC input range with active power factor correction and a fully potted IP67 housing suitable for dry, damp and wet locations. The broad case temperature range from −40 °C to +85 °C and the integrated protections against short circuit, overload, overvoltage and overtemperature allow the PWM‑60‑24DA2 to operate reliably in challenging architectural, commercial and industrial environments. A key unique characteristic of the PWM‑60‑24DA2 is the native DALI‑2 interface (DT6) on the primary side, providing addressable, group‑capable dimming and seamless integration into modern building and lighting management systems, while still delivering a pure PWM constant‑voltage output to the LEDs. Combined with its long MTBF and comprehensive safety and EMC approvals, this driver is an excellent choice for 24 V LED coves, linear accent lighting, signage and other DALI‑2‑based projects where stable low‑flicker dimming and central control are required.

from €26.10*

Details

Cutsomers also bought

Tip

PWM-60-24KN

Technical Information & Details of the MEAN WELL PWM-60-24KN LED Driver Output Power: 60 W Output Voltage: 24 V DC Output Current: 2.5 A Dimming Range: 0 – 100 % (PWM dimming) Minimum Dimming Level: 0.01 % PWM Output Frequency: 200 – 4,000 Hz, user‑changeable via ETS Input Voltage Range: 90 – 305 V AC / 127 – 431 V DC Input Frequency: 47 – 63 Hz Power Factor (typ.): > 0.97 @115 VAC, > 0.95 @230 VAC, > 0.92 @277 VAC (full load) Efficiency (typ.): approx. 89 % AC Input Current (typ.): 0.8 A @115 VAC / 0.4 A @230 VAC / 0.32 A @277 VAC Inrush Current (typ.): 50 A @230 VAC (cold start, twidth ≈350 μs, per NEMA 410) THD: < 20 % (≥60 % load @115 / 230 VAC; ≥75 % load @277 VAC) Standby Power Consumption: < 0.5 W Overload Protection: 108 – 130 % of rated power, hiccup mode, auto recovery Overvoltage Protection: shut down output, re‑power on to recover (typ. 28 – 34 V DC) Overtemperature Protection: shut down output, re‑power on to recover Short‑circuit Protection: hiccup mode, auto recovery Operating Temperature (case): −35 °C to +85 °C (derating according to “Output load vs. temperature” curve) Operating Humidity: 20 – 95 % RH, non‑condensing Storage Temperature / Humidity: −35 °C to +80 °C, 10 – 95 % RH Temperature Coefficient: ±0.03 % / °C (0 – 50 °C) Vibration Resistance: 10 – 500 Hz, 5 G, 12 min./cycle, 72 min. along each X, Y, Z axis Dielectric Strength: 3.75 kVAC (input–output) Isolation Resistance: > 100 MΩ @500 VDC, 25 °C, 70 % RH Safety Standards: ENEC EN 61347‑1, EN 61347‑2‑13, EN 62384 (independent), GB19510.1 / GB19510.14, BIS IS 15885 (Part 2/Sec 13 for 12/24 KN), EAC KNX Standards: Certified KNX protocol EMC Emission: EN 55015, EN 61000‑3‑2 Class C (≥60 % load), EN 61000‑3‑3, GB/T 17743, GB17625.1, EAC TP TC 020 EMC Immunity: EN 61000‑4‑2,3,4,5,6,8,11; EN 61547 (light industry level, 2 kV Line‑Line surge), EAC TP TC 020 MTBF (typ.): 2,135,200 h (Telcordia SR‑332, 25 °C) / 247,700 h (MIL‑HDBK‑217F, 25 °C) Dimensions (L x W x H): 150 mm x 53 mm x 35 mm Weight: approx. 0.45 kg Case & Protection: fully encapsulated plastic housing, IP67, Class II Cooling Method: fanless, free air convection Information about the MEAN WELL PWM-60-24KN The MEAN WELL PWM‑60‑24KN is a 60 W constant‑voltage LED driver with 24 V DC PWM‑style output and a fully integrated KNX interface, created for direct connection to KNX building automation systems without requiring a KNX‑DALI gateway. Its PWM constant‑voltage output allows 24 V LED strips and constant‑voltage LED lamps to maintain uniform brightness and colour appearance over long runs, even when dimmed deeply. Key strengths of the PWM‑60‑24KN include the very low minimum dimming level of 0.01 % and the user‑adjustable PWM frequency from 200 Hz up to 4 kHz via ETS, enabling setups that comply with IEEE 1789‑2015 “no risk” recommendations and EU Ecodesign SVM flicker limits. Combined with a typical efficiency of around 89 %, a wide 90–305 V AC input range and a fully potted IP67 plastic housing, the driver is well suited for long‑life installations in indoor architectural, decorative and ambient lighting applications where flicker and visual comfort are critical. The native KNX protocol support also stands out: the driver can be addressed and programmed in ETS, and the PWM KN series even supports ETS addressing/programming without AC mains connected, simplifying commissioning on site. Together with its broad case temperature range from −35 °C to +85 °C, robust protection features and international approvals, the PWM‑60‑24KN offers a compact, reliable KNX‑centrical solution for 24 V LED strip lighting, indoor LED lighting and constant‑voltage LED bulbs in smart building projects.

€58.20*

LPV-100-24

Technical Information & Details about the MEAN WELL LPV-100-24 Power Supply Rated output power: 100.8 W DC output voltage: 24 V DC Rated output current: 4.2 A Current range: 0 – 4.2 A Input voltage range: 90 – 264 V AC (127 – 370 V DC), 47 – 63 Hz Efficiency (typical): about 88 % Ripple & noise (max.): ≤ 150 mVp-p Output voltage range (O.V.P. region): 27.6 – 32.4 V DC Voltage tolerance: ±5.0 % Line regulation: ±2.0 % Load regulation: ±5.0 % Setup, rise time: 2000 ms, 25 ms at 230 V AC / 115 V AC (first cold start) Hold-up time (typ.): 50 ms at 230 V AC / 14 ms at 115 V AC (full load) AC input current (typ.): 2.2 A at 115 V AC / 1.2 A at 230 V AC Inrush current (typ.): 75 A at 230 V AC (cold start, twidth ≈ 700 μs) Leakage current: < 0.25 mA at 240 V AC Overload protection: 110 – 150 % of rated output power, hiccup mode, auto recovery after fault removal Overvoltage protection: shut down output voltage at 27.6 – 32.4 V, re‑power on to recover Operating temperature: −25 °C to +70 °C (derating required, see curve) Operating humidity: 20 – 90 % RH, non‑condensing Storage conditions: −40 °C to +80 °C, 10 – 95 % RH Cooling method: free air convection (fanless) Withstand voltage: 3000 V AC between input and output Isolation resistance: > 100 MΩ at 500 V DC, 25 °C, 70 % RH Ingress protection rating: IP67, fully encapsulated plastic case Dimensions (L x W x H): 190 mm x 52 mm x 37 mm Weight: approx. 610 g Vibration resistance: 10 – 500 Hz, 2 G, 60 min per axis (X, Y, Z) EMC emission: BS EN/EN 55032 Class B, BS EN/EN 61000‑3‑2 Class A (≤80 % load), BS EN/EN 61000‑3‑3 EMC immunity: BS EN/EN 61000‑4‑2,‑3,‑4,‑5,‑6,‑8,‑11; BS EN/EN 55035 Safety approvals: UL 8750, CSA C22.2 No. 250.13‑12, UL 879, CSA C22.2 No. 207‑M89, BIS IS 15885, IEC/BS EN/EN 62368‑1, EAC Case design: fully isolated, encapsulated plastic case for damp and dusty environments MTBF (typical): 4,497,100 h (Telcordia SR‑332, 25 °C) Manufacturer warranty: 2 years About the MEAN WELL LPV-100-24 The MEAN WELL LPV-100-24 is a 100 W class constant‑voltage switching power supply that provides a regulated 24 V DC output at up to 4.2 A, fully encapsulated in an IP67 plastic housing for reliable use in harsh environments. Its universal AC input range, high efficiency, short‑circuit, overload and overvoltage protection, and fanless free air convection make it suitable for indoor and sheltered outdoor applications. With compact dimensions, strong isolation and broad safety and EMC approvals, LPV-100-24 is a robust 24 V source for LED strips, signage, control systems and other low‑voltage equipment that require a rugged, dust‑ and splash‑proof power supply.

from €18.10*

Details

ELG-240-24DA-3Y IP67

Technische Eigenschaften des MEAN WELL ELG-240-24DA-3Y Leistung: 240W Aluminiumgehäuse Integriertes PFC Standby Ladeverbrauch <0,5W IP67 DALI Mit PE (Varianten ohne 3Y: PE am Gehäuse!) Allgemeine Lebensdauer >50.000Std. 5 Jahre Garantie Produktbeschreibung zur MEAN WELL ELG-240 Serie Bei der MEAN WELL ELG-240 Serie handelt es sich um 240W AC/DC LED Netzteile, die im dualen Modus einen Konstantstrom- und Konstantspannungsausgang unterstützen. Die ELG-240 Netzteile arbeiten mit einem 100~305VAC Eingangsbereich und bieten verschiedene Ausgangsspannungen im Bereich von 24V bis 54V an. Dank des 93% hohem Wirkungsgrads und dem lüfterlosen Design kann die Serie unter freier Luftkonvektion im Temperaturbereich von -40°C bis +90°C betrieben werden. Durch das verwendete Aluminiumgehäuse und den Schutzklassen IP65/67 finden MEAN WELL ELG-240 Netzteile Anwendung sowohl Indoor-, als auch im Outdoorbereich. Die Serie verfügt weiterhin über verschiedene zusätzliche Funktionen, wie 3 in 1 Dimmung, Smart-Timer-Dimmung oder DALI, welche eine hohe Flexibilität in LED Beleuchtungsanwendungen garantieren.

from €45.50*

Details

LCM-40DA End of Life

Discontinued Product see replacement: LCM-40DA2

from €30.60*

Details

ELG-75-48DA-3Y

Technical Information & Details for the MEAN WELL ELG-75-48AB-3Y Power Supply Output Power: 76.8 W Output Voltage: 48 V DC Output Current: 1.6 A Voltage Range: 24 – 48 V Output Voltage Adjustment Range: 43.2 – 52.8 V DC Output Current Adjustment Range: 0.8 – 1.6 A Input Voltage Range: 100 – 305 V AC / 142 – 431 V DC, 47 – 63 Hz Power Factor: PF ≥ 0.95 at 230 VAC (full load) Efficiency: up to 90% Ripple & Noise: ≤ 250 mVp-p Inrush Current: Cold start 50 A at 230 VAC No Load / Standby Power: < 0.5 W Operating Temperature: Tc = -40 °C to +85 °C Cooling: fanless natural convection Ingress Protection: IP65 Protection Functions: short circuit, overload, overvoltage, overtemperature Isolation Voltage: 3.75 kV AC input to output Dimensions (L x W x H): 180 mm x 63 mm x 35.5 mm Weight: approx. 0.8 kg Dimming Function: 3-in-1 dimming via 0–10 V, 10 V PWM, or resistance Configuration: AB version with adjustable voltage/current and dimming, 3Y with 3-wire input including PE Safety & EMC Certifications: UL8750, CSA C22.2 No. 250.13-12, EN/IEC 61347-1, EN/IEC 61347-2-13, EN62384, EAC Lifetime: typical > 50,000 hours Manufacturer Warranty: 5 years Information about the MEAN WELL ELG-75-48AB-3Y The MEAN WELL ELG-75-48AB-3Y is a dependable 75 W LED power supply designed for demanding indoor and outdoor lighting applications. Its key strengths include a wide universal input range, high efficiency up to 90%, fanless cooling, and a durable metal housing with IP65 protection, making it well suited for architectural lighting, high-bay lighting, flood lighting, and other long-life LED installations. Because the unit supports both constant voltage and constant current operation, it offers strong application flexibility while maintaining stable and reliable output performance. The AB version stands out through its built-in output voltage and output current adjustment together with 3-in-1 dimming capability. This gives installers and lighting designers more precise control for system matching and brightness regulation through 0–10 V, PWM, or resistance dimming, which is a clear advantage in customized LED projects. The 3Y configuration adds a 3-wire input with protective earth for more installation security, while the integrated protection functions, long expected service life, and 5-year manufacturer warranty make this model a strong choice for professional continuous-duty use.

from €30.30*

Details

LS-40V24-D1 Auslaufmodell

Achtung Kunde, das Produkt LS-40V24-D1 ist jetzt ein Auslaufartikel.

from €23.67*

Details