Technical Information & Details for MEAN WELL LCM-40 LED Driver Output Power: 42 W Output Current: 350mA, 500mA, 600mA, 700mA (default), 900mA, 1050mA (selectable via DIP switch) Output Voltage Range: 2 – 100 V DC (depending on selected current) Input Voltage Range: 180 – 295 V AC / 254 – 417 V DC, 47 – 63 Hz Efficiency: up to 92% Auxiliary Output: 12 V / 50 mA (for fans or sensors) Inrush Current: Cold start 20A at 230 V AC No-load Power Consumption: < 1.0 W Operating Temperature: −30 °C to +90 °C (case temperature Tcase) Cooling: Fanless natural convection Protections: Short circuit, Over voltage, Over temperature Withstand Voltage: 3.75 kV AC between input and output Dimensions (L x W x H): 123.5 mm x 81.5 mm x 23 mm Weight: approx. 240 g Certifications: CE, ENEC, UL8750, CB, BIS, EAC, CCC Dimming Function: 3-in-1 dimming (0-10V DC, 10V PWM, resistance) Manufacturer Warranty: 3 years Information about the MEAN WELL LCM-40 The MEAN WELL LCM-40 is a high-performance 40W LED driver designed for maximum versatility in commercial and industrial lighting applications. Its defining feature is the multiple-stage constant current output, which allows professionals to select output currents from 350mA to 1050mA using integrated DIP switches. This flexibility ensures compatibility with a vast range of LED configurations, making it a "one-size-fits-all" solution that simplifies inventory management and technical design. With an exceptional efficiency of up to 92%, the unit ensures minimal energy loss and low heat generation during operation. Technically advanced, the LCM-40 includes a built-in 12V auxiliary DC output, perfect for powering external fans or smart sensors without the need for additional power sources. The 3-in-1 dimming interface provides seamless control via 0-10V, PWM signal, or resistance, while the synchronization capability allows up to ten drivers to be linked for uniform brightness across large lighting zones. Featuring a slim Class II plastic housing and active PFC function, this driver is the ideal choice for architectural lighting, office panels, and indoor fixtures where high reliability and superior light quality are essential requirements.

Technical Information & Details for MEAN WELL LCM-60 LED Driver Output Power: 60.3 W Output Current: 500mA, 600mA, 700mA (default), 900mA, 1050mA, 1400mA (selectable via DIP switch) Output Voltage Range: 2 – 90 V DC (depending on selected current) Input Voltage Range: 180 – 295 V AC / 254 – 417 V DC, 47 – 63 Hz Efficiency: up to 92% Auxiliary Output: 12 V / 50 mA (for fans or smart sensors) Inrush Current: Cold start 20A at 230 V AC No-load Power Consumption: < 1.0 W Operating Temperature: −30 °C to +90 °C (case temperature Tcase) Cooling: Fanless natural convection Protections: Short circuit, Over voltage, Over temperature Withstand Voltage: 3.75 kV AC between input and output Dimensions (L x W x H): 123.5 mm x 81.5 mm x 23 mm Weight: approx. 240 g Certifications: CE, ENEC, UL8750, CB, BIS, EAC, CCC Dimming Function: 3-in-1 dimming (0-10V DC, 10V PWM, resistance) Manufacturer Warranty: 3 years Information about the MEAN WELL LCM-60 The MEAN WELL LCM-60 is a high-capacity and exceptionally efficient 60W LED driver, serving as a versatile cornerstone for professional indoor lighting systems. Its most prominent feature is the multiple-stage constant current output, which can be configured via on-board DIP switches to provide current levels ranging from 500mA up to 1400mA. This extensive range allows system integrators to drive a vast array of different LED modules with a single driver model, significantly enhancing design flexibility and reducing the complexity of inventory management. With an efficiency of up to 92%, the unit ensures energy-saving operation while maintaining low thermal stress. From a technical standpoint, the LCM-60 also features a built-in 12V auxiliary DC output, ideal for powering peripheral devices such as cooling fans or IoT sensors without requiring an additional power supply. The integrated 3-in-1 dimming function enables precise light intensity control via 0-10V, PWM, or resistance, while the synchronization interface supports linking up to ten units for perfectly harmonized parallel operation. The slim Class II plastic housing and active PFC function make this driver the premier choice for panel lighting, architectural lighting designs, and commercial applications where durability and superior light quality are paramount.

Technical Information & Details about the MEAN WELL HDR-30-24 Power Supply Output Power: 36 W Output Voltage: 24 V DC Output Current: 1.5 A Current Range: 0 – 1.5 A Input Voltage Range: 85 – 264 V AC (277 V AC operational) / 120 – 370 V DC (390 V DC operational), 47 – 63 Hz Efficiency: up to 89 % Ripple & Noise: ≤ 150 mVp-p Output Voltage Adjustment Range: 21.6 – 29 V DC Voltage Tolerance: ±1.0 % Line Regulation: ±1.0 % Load Regulation: ±1.0 % Setup, Rise Time: 500 ms, 50 ms @230 V AC / 115 V AC (full load) Hold-up Time: 30 ms @230 V AC / 12 ms @115 V AC (full load) Inrush Current: 25 A @115 V AC / 45 A @230 V AC (cold start) No-load Power Consumption: < 0.3 W Operating Temperature: −30 °C to +70 °C (with derating according to curve) Cooling: fanless free air convection Protection Functions: short circuit (hiccup mode, auto recovery), overload (constant current limiting 50–100 % of rated output voltage, auto recovery), overvoltage (shut down, re‑power to recover) Overvoltage Category: OVC III (up to 2000 m altitude) Isolation Voltage: 4000 V AC between input and output Isolation Resistance: ≥ 100 MΩ @ 500 V DC, 25 °C, 70 % RH Dimensions (W x H x D): 35 mm x 90 mm x 54.5 mm Weight: approx. 130 g Housing Material: insulating plastic, Class II Mounting: DIN rail TS35/7.5 or TS35/15 Safety & EMC Certifications: UL 62368-1, UL 508, TUV BS EN/EN 61558-2-16, BS EN/EN 61558-1, IEC 62368-1, EAC TP TC 004, BSMI, BIS IS13252, compliant with BS EN/EN 55032, BS EN/EN 55035, BS EN/EN 61000-6-2, BS EN/EN 61204-3 LED Indicator: Power On LED indicator Manufacturer Warranty: 3 years About the MEAN WELL HDR-30-24 The MEAN WELL HDR-30-24 is a 30 W ultra-slim DIN-rail power supply that provides a stable 24 V DC / 1.5 A output in a narrow 35 mm (2 SU) housing, ideal for compact distribution boards and space-saving control cabinets. With its wide 85–264 V AC / 120–370 V DC input range and high efficiency up to 89 %, it offers an energy-efficient 24 V control voltage source for building automation, home automation, and light industrial control systems. The adjustable 21.6–29 V output range allows precise tuning of the 24 V bus to compensate for voltage drops across wiring runs and to supply PLCs, sensors, relays, and I/O modules with reliable power. Its Class II plastic enclosure provides double insulation for enhanced user safety and simplifies installation by eliminating the need for a protective earth connection. Fanless free air convection, very low no-load power consumption below 0.3 W, a wide operating temperature range from −30 °C to +70 °C, and comprehensive protection and certification features make the HDR-30-24 a robust, long-life 24 V power solution for household and industrial automation applications.

Discontinued Product see replacement LCM-25DA2

Technical Information & Details for MEAN WELL HLG-150H-24A Power Supply Output Power: 151.2 W Output Voltage: 24 V DC Output Current: 6.3 A Input Voltage Range: 90 – 305 V AC / 127 – 431 V DC, 47 – 63 Hz Efficiency: 94% Ripple & Noise: ≤ 200 mVp-p Inrush Current: max. 65 A (Cold Start) @ 230 V AC No-load Power Consumption: < 0.5 W (model dependent) Operating Temperature: −40 °C to +90 °C (Case Temperature) Cooling: Fanless, free air convection Protection Functions: Short circuit, Overload, Over voltage, Over temperature Overvoltage Category: OVC III compliant Isolation Voltage: 3750 V AC between Input and Output Dimensions (L x W x H): 228 mm x 68 mm x 38.8 mm Weight: approx. 1150 g Safety & EMC Certificates: UL8750, EN61347-1, EN61347-2-13, IP65, CE Adjustability: Output voltage and current level adjustable via internal potentiometers Manufacturer Warranty: 7 Years About the MEAN WELL HLG-150H-24A The MEAN WELL HLG-150H-24A stands as a premium, high-performance solution within the LED driver market, engineered for maximum durability and peak efficiency. This 150W powerhouse features a dual-mode output, providing both Constant Voltage and Constant Current capabilities, which ensures compatibility with a vast array of high-end LED lighting architectures. The "A" type designation highlights its user-adjustable design, allowing for precise onsite calibration of the output voltage (22–27V) and current (3.8–6.3A) via built-in potentiometers to meet specific project requirements. Encased in a rugged aluminum housing with an IP65 rating, it is fully protected against dust and water splashes, making it an ideal choice for harsh industrial environments and outdoor street lighting. With an industry-leading efficiency rate of 94% and a fanless thermal design, it operates silently while maintaining a typical lifetime of over 62,000 hours. This commitment to quality is backed by a comprehensive 7-year manufacturer warranty, providing long-term reliability for critical infrastructure and commercial installations.

100W LED Schaltnetzteile 100W  Single Output LED Power Supply