Technical Information & Details for MEAN WELL LCM-25 LED Driver Output Power: Max. 25.2 W Output Current: 350mA, 500mA, 600mA, 700mA (default), 900mA, 1050mA (selectable via DIP switch) Output Voltage Range: 6 – 54 V DC (depending on selected current) Input Voltage Range: 180 – 277 V AC / 254 – 392 V DC, 47 – 63 Hz Efficiency: up to 86% Current Ripple: max. 5.0% (@ rated current) Inrush Current: Cold start 20A (t_width = 260 µs) at 230 V AC No-load Power Consumption: < 0.5 W Operating Temperature: −30 °C to +85 °C (case temperature Tcase) Cooling: Fanless natural convection Protections: Short circuit, Over temperature (auto-recovery) Withstand Voltage: 3.75 kV AC between input and output Dimensions (L x W x H): 105 mm x 68 mm x 23 mm Weight: approx. 160 g Certifications: CE, ENEC, UL8750, CB, BIS, EAC, GB19510 Dimming Function: 3-in-1 dimming (0-10V DC, 10V PWM, resistance) Manufacturer Warranty: 3 years Information about the MEAN WELL LCM-25 The MEAN WELL LCM-25 is a highly flexible 25W LED driver specifically engineered for modern indoor lighting applications. The standout feature of this model is its multiple-stage constant current output, which can be easily configured using integrated DIP switches. Offering six distinct current levels ranging from 350mA to 1050mA, this power supply provides exceptional versatility and helps reduce inventory costs, as a single unit can support various LED configurations. With the 3-in-1 dimming function, brightness can be seamlessly controlled via 0-10V DC, a PWM signal, or resistance, allowing for precise adjustment to any lighting environment. Beyond its high energy efficiency of up to 86%, the LCM-25 series excels with its synchronization capability, allowing up to ten units to be linked for uniform light control in larger installations. Its slim Class II plastic housing design, which does not require a safety ground connection, makes the driver ideal for installation in plastic or wooden fixtures, as well as panel and architectural lighting. The built-in active PFC function and comprehensive protection mechanisms against short circuit and over-temperature ensure long-lasting, reliable operation even under demanding thermal conditions up to a case temperature of 85°C.

Technical Information & Details for MEAN WELL LCM-40KN LED Driver Output Power: 42 W Output Current: 350mA, 500mA, 600mA, 700mA (default), 900mA, 1050mA (selectable via DIP switch) Output Voltage Range: 2 – 100 V DC (depending on selected current) Input Voltage Range: 180 – 295 V AC / 254 – 417 V DC, 47 – 63 Hz Efficiency: up to 90% Auxiliary Output: 12 V / 50 mA (ideal for sensors) Inrush Current: Cold start 20A (t_width = 260 µs) at 230 V AC Standby Power Consumption: < 0.5 W Operating Temperature: −30 °C to +90 °C (case temperature Tcase) Cooling: Fanless natural convection Protections: Short circuit, Over voltage, Over temperature (auto-recovery) Withstand Voltage: 3.75 kV AC between input and output Dimensions (L x W x H): 123.5 mm x 81.5 mm x 23 mm Weight: approx. 240 g Certifications: ENEC, UL8750, CB, EAC, KNX certified Interface: Integrated KNX interface & Push dimming Manufacturer Warranty: 3 years Information about the MEAN WELL LCM-40KN The MEAN WELL LCM-40KN is a high-performance 40W LED driver designed for direct implementation into KNX building automation environments. By featuring a built-in KNX interface, it eliminates the requirement for complex KNX-DALI gateways, streamlining the installation process and lowering overall system costs. A standout feature is its multiple-stage constant current output, allowing users to select current levels between 350mA and 1050mA via integrated DIP switches. This flicker-free design guarantees superior light quality, making it ideal for professional office spaces and architectural lighting projects. Beyond standard lighting control, the LCM-40KN supports advanced digital functions such as Constant Light Output (CLO), operating hours monitoring, and power consumption feedback directly to the KNX bus. The unit also includes a useful 12V auxiliary DC output for powering small external devices like sensors and offers the capability to synchronize up to ten drivers for perfectly matched lighting zones. With its slim Class II plastic housing and compliance for emergency lighting applications, this driver provides a reliable and future-proof solution for intelligent building projects, maintaining stable operation even at case temperatures up to 90°C.

Technical Information & Details for MEAN WELL LCM-60 LED Driver Output Power: 60.3 W Output Current: 500mA, 600mA, 700mA (default), 900mA, 1050mA, 1400mA (selectable via DIP switch) Output Voltage Range: 2 – 90 V DC (depending on selected current) Input Voltage Range: 180 – 295 V AC / 254 – 417 V DC, 47 – 63 Hz Efficiency: up to 92% Auxiliary Output: 12 V / 50 mA (for fans or smart sensors) Inrush Current: Cold start 20A at 230 V AC No-load Power Consumption: < 1.0 W Operating Temperature: −30 °C to +90 °C (case temperature Tcase) Cooling: Fanless natural convection Protections: Short circuit, Over voltage, Over temperature Withstand Voltage: 3.75 kV AC between input and output Dimensions (L x W x H): 123.5 mm x 81.5 mm x 23 mm Weight: approx. 240 g Certifications: CE, ENEC, UL8750, CB, BIS, EAC, CCC Dimming Function: 3-in-1 dimming (0-10V DC, 10V PWM, resistance) Manufacturer Warranty: 3 years Information about the MEAN WELL LCM-60 The MEAN WELL LCM-60 is a high-capacity and exceptionally efficient 60W LED driver, serving as a versatile cornerstone for professional indoor lighting systems. Its most prominent feature is the multiple-stage constant current output, which can be configured via on-board DIP switches to provide current levels ranging from 500mA up to 1400mA. This extensive range allows system integrators to drive a vast array of different LED modules with a single driver model, significantly enhancing design flexibility and reducing the complexity of inventory management. With an efficiency of up to 92%, the unit ensures energy-saving operation while maintaining low thermal stress. From a technical standpoint, the LCM-60 also features a built-in 12V auxiliary DC output, ideal for powering peripheral devices such as cooling fans or IoT sensors without requiring an additional power supply. The integrated 3-in-1 dimming function enables precise light intensity control via 0-10V, PWM, or resistance, while the synchronization interface supports linking up to ten units for perfectly harmonized parallel operation. The slim Class II plastic housing and active PFC function make this driver the premier choice for panel lighting, architectural lighting designs, and commercial applications where durability and superior light quality are paramount.

Innerhalb der EU nicht als LED-Treiber zugelassen! Not approved as an LED driver within the EU! Eine zugelassene Alternative ist z.B. die LPF-25-Serie Technische Eigenschaften des MEAN WELL APC-35-500 Leistung: 35 W Eingangsbereich: 90 bis 264 VAC  Ausgangsstrom: 0,5 A 300 VAC Spannungsschwankungen widerstehen Kompakte Bauweise Schutzart IP42 im Kunststoffgehäuse Kühlung durch freie Luftkonvektion Schutz vor Kurzschluss und Überspannung EN55032, EN55035, EN61000-3-2,  EN61000-3-3 Informationen zum MEAN WELL APC-35-500 Das Mean Well APC-35-500 ist ein kompaktes und robustes LED-Schaltnetzteil mit einer konstanten Stromausgabe von 0,5 A für vielfältige LED-Beleuchtungsanlagen wie z. B. LED-Dekorationen und LED-Reklameschilder. Am Eingang verfügt dieses Netzteil über einen weiten AC-Spannungsbereich von 90 bis 264 V (Derating bei 90 - 100 VAC) und erzeugt zudem eine geregelte Nennleistung von 35 W. Die Produktreihe von MeanWell ist weiterhin widerstandsfähig gegen 300 VAC Spannungsschwankungen für bis zu fünf Sekunden. Eine stabile Stromversorgung beim Betrieb ist so sichergestellt. Neben der Widerstandsfähigkeit zeichnen sich die Mean Well APC-35-Netzgeräte durch die kompakte und geschlossene Bauform sowie ein Design nach Schutzart IP42 aus. Damit ist die Produktserie für den ausreichenden Einsatz in verschiedensten Indoor-Bereichen gut geeignet. Darüber hinaus kann die konvektionsgekühlte MeanWell APC-35-Serie mit der lüfterlosen Konstruktion einen energieeffizienten und geräuscharmen Betrieb gewährleisten. Dabei können die LED-Netzteile der Reihe einen Wirkungsgrad von bis zu 84% erreichen. Ausgangsseitig bietet die Mean Well APC-35-Serie die Schutzmaßnahmen gegen Kurzschluss sowie Überlast. Die LED-Netzteile sind zudem konform mit den grundlegenden Sicherheitsstandards nach EN55032, EN55035, EN61000-3-2,  EN61000-3-3 sowie weiteren Normen im LED-Beleuchtungssektor. Mit hoher Zuverlässigkeit sowie herausragender Kosteneffizienz ist die Produktreihe von MeanWell die optimale Lösung für LED-Anwendungen mit kleiner Leistung. Nur für den Einbau in Geräten, die einen anderen Primärgebrauch aufweisen als die Beleuchtung, z. B.Kopiergeräte, Overhead- und Diaprojektoren oder für Skalen- und Anzeigebeleuchtung.

350mA /3~10.5VDC Konstntstrom Netzteile 350mA /3~10.5VDC Constant Current Power Supply Auslaufmodell siehe Nachfolger SS5-3C350

Technical Information & Details for MEAN WELL HLG-150H-24A Power Supply Output Power: 151.2 W Output Voltage: 24 V DC Output Current: 6.3 A Input Voltage Range: 90 – 305 V AC / 127 – 431 V DC, 47 – 63 Hz Efficiency: 94% Ripple & Noise: ≤ 200 mVp-p Inrush Current: max. 65 A (Cold Start) @ 230 V AC No-load Power Consumption: < 0.5 W (model dependent) Operating Temperature: −40 °C to +90 °C (Case Temperature) Cooling: Fanless, free air convection Protection Functions: Short circuit, Overload, Over voltage, Over temperature Overvoltage Category: OVC III compliant Isolation Voltage: 3750 V AC between Input and Output Dimensions (L x W x H): 228 mm x 68 mm x 38.8 mm Weight: approx. 1150 g Safety & EMC Certificates: UL8750, EN61347-1, EN61347-2-13, IP65, CE Adjustability: Output voltage and current level adjustable via internal potentiometers Manufacturer Warranty: 7 Years About the MEAN WELL HLG-150H-24A The MEAN WELL HLG-150H-24A stands as a premium, high-performance solution within the LED driver market, engineered for maximum durability and peak efficiency. This 150W powerhouse features a dual-mode output, providing both Constant Voltage and Constant Current capabilities, which ensures compatibility with a vast array of high-end LED lighting architectures. The "A" type designation highlights its user-adjustable design, allowing for precise onsite calibration of the output voltage (22–27V) and current (3.8–6.3A) via built-in potentiometers to meet specific project requirements. Encased in a rugged aluminum housing with an IP65 rating, it is fully protected against dust and water splashes, making it an ideal choice for harsh industrial environments and outdoor street lighting. With an industry-leading efficiency rate of 94% and a fanless thermal design, it operates silently while maintaining a typical lifetime of over 62,000 hours. This commitment to quality is backed by a comprehensive 7-year manufacturer warranty, providing long-term reliability for critical infrastructure and commercial installations.