LCM-25DA End of Life

Discontinued Product see replacement: LCM-40DA2

Discontinued Product see replacement LCM-60DA2

The photo shows the bus with two LCM sync cables, meaning it can be installed this way if multiple LCMs are to be operated on one bus. The prices always refer to one cable only!

Technical Information & Details on MEAN WELL PWM-120-24DA Power Supply Output Power: 120 W Output Voltage: 24 V DC Output Current: 5 A Input Voltage Range: 90 – 305 V AC / 127 – 431 V DC, 47 – 63 Hz Efficiency: up to 90 % PWM Frequency: 1.47 kHz Inrush Current: typ. 60 A / 50 µs @ 230 VAC No-Load Power Consumption: < 0.5 W (Standby < 0.5 W) Operating Temperature: −40 °C to +80 °C Cooling: natural convection Protection Functions: Short circuit (Hiccup mode), Overload, Overvoltage, Over temperature Overvoltage Category: II Isolation Voltage: 3.75 kV AC between input and output; IP-DA 1.5 kV AC Dimensions (L x W x H): 191 mm x 63 mm x 37.5 mm Weight: approx. 0.97 kg Safety & EMC Certifications: UL8750, ENEC EN61347-1/-2-13, EAC, CB, IP67, BIS IS 15885, DALI Standards IEC62386-101/102/207/251 (DT6) Dimming: DALI (up to 16 groups / 64 addresses) MTBF: > 2243.7k hours (Telcordia SR-332) Manufacturer Warranty: 5 years Information on MEAN WELL PWM-120-24DA This PWM LED driver excels with its extremely wide operating range (−40 °C to +80 °C), IP67 waterproofing for outdoor use, and high efficiency up to 90 % with low no-load consumption. Unique features include DALI dimming (DT6) with synchronized multi-device control, automatic fault recovery, and superior vibration resistance for enduring performance in smart lighting systems. The MEAN WELL PWM-120-DA series is a high-performance 120 W PWM output LED driver power supply with waterproof IP67 housing and integrated DALI interface, designed for demanding outdoor and industrial applications. The PWM-120-24DA model delivers stable 24 V DC / 5 A output power with an extremely wide input voltage range of 90–305 V AC. It is ideal for DALI-controlled LED lighting, street lamps, industrial LEDs, and weather-exposed installations, backed by comprehensive certifications and a 5-year manufacturer warranty.

End of Life Product!! see LCM - 25/40/60

Technical Information & Details for MEAN WELL LCM-25 LED Driver Output Power: Max. 25.2 W Output Current: 350mA, 500mA, 600mA, 700mA (default), 900mA, 1050mA (selectable via DIP switch) Output Voltage Range: 6 – 54 V DC (depending on selected current) Input Voltage Range: 180 – 277 V AC / 254 – 392 V DC, 47 – 63 Hz Efficiency: up to 86% Current Ripple: max. 5.0% (@ rated current) Inrush Current: Cold start 20A (t_width = 260 µs) at 230 V AC No-load Power Consumption: < 0.5 W Operating Temperature: −30 °C to +85 °C (case temperature Tcase) Cooling: Fanless natural convection Protections: Short circuit, Over temperature (auto-recovery) Withstand Voltage: 3.75 kV AC between input and output Dimensions (L x W x H): 105 mm x 68 mm x 23 mm Weight: approx. 160 g Certifications: CE, ENEC, UL8750, CB, BIS, EAC, GB19510 Dimming Function: 3-in-1 dimming (0-10V DC, 10V PWM, resistance) Manufacturer Warranty: 3 years Information about the MEAN WELL LCM-25 The MEAN WELL LCM-25 is a highly flexible 25W LED driver specifically engineered for modern indoor lighting applications. The standout feature of this model is its multiple-stage constant current output, which can be easily configured using integrated DIP switches. Offering six distinct current levels ranging from 350mA to 1050mA, this power supply provides exceptional versatility and helps reduce inventory costs, as a single unit can support various LED configurations. With the 3-in-1 dimming function, brightness can be seamlessly controlled via 0-10V DC, a PWM signal, or resistance, allowing for precise adjustment to any lighting environment. Beyond its high energy efficiency of up to 86%, the LCM-25 series excels with its synchronization capability, allowing up to ten units to be linked for uniform light control in larger installations. Its slim Class II plastic housing design, which does not require a safety ground connection, makes the driver ideal for installation in plastic or wooden fixtures, as well as panel and architectural lighting. The built-in active PFC function and comprehensive protection mechanisms against short circuit and over-temperature ensure long-lasting, reliable operation even under demanding thermal conditions up to a case temperature of 85°C.