Technical Information & Details for MEAN WELL LCM-25 LED Driver Output Power: Max. 25.2 W Output Current: 350mA, 500mA, 600mA, 700mA (default), 900mA, 1050mA (selectable via DIP switch) Output Voltage Range: 6 – 54 V DC (depending on selected current) Input Voltage Range: 180 – 277 V AC / 254 – 392 V DC, 47 – 63 Hz Efficiency: up to 86% Current Ripple: max. 5.0% (@ rated current) Inrush Current: Cold start 20A (t_width = 260 µs) at 230 V AC No-load Power Consumption: < 0.5 W Operating Temperature: −30 °C to +85 °C (case temperature Tcase) Cooling: Fanless natural convection Protections: Short circuit, Over temperature (auto-recovery) Withstand Voltage: 3.75 kV AC between input and output Dimensions (L x W x H): 105 mm x 68 mm x 23 mm Weight: approx. 160 g Certifications: CE, ENEC, UL8750, CB, BIS, EAC, GB19510 Dimming Function: 3-in-1 dimming (0-10V DC, 10V PWM, resistance) Manufacturer Warranty: 3 years Information about the MEAN WELL LCM-25 The MEAN WELL LCM-25 is a highly flexible 25W LED driver specifically engineered for modern indoor lighting applications. The standout feature of this model is its multiple-stage constant current output, which can be easily configured using integrated DIP switches. Offering six distinct current levels ranging from 350mA to 1050mA, this power supply provides exceptional versatility and helps reduce inventory costs, as a single unit can support various LED configurations. With the 3-in-1 dimming function, brightness can be seamlessly controlled via 0-10V DC, a PWM signal, or resistance, allowing for precise adjustment to any lighting environment. Beyond its high energy efficiency of up to 86%, the LCM-25 series excels with its synchronization capability, allowing up to ten units to be linked for uniform light control in larger installations. Its slim Class II plastic housing design, which does not require a safety ground connection, makes the driver ideal for installation in plastic or wooden fixtures, as well as panel and architectural lighting. The built-in active PFC function and comprehensive protection mechanisms against short circuit and over-temperature ensure long-lasting, reliable operation even under demanding thermal conditions up to a case temperature of 85°C.

XHP-2P/Pro Cable 1, Length: 350mm Side 1: Equivalent XHP-2P, Side 2: Open, tinned - open ends pre-tinned Wire: UL2468 #24AWG

Technical Information & Details for MEAN WELL LCM-40 LED Driver Output Power: 42 W Output Current: 350mA, 500mA, 600mA, 700mA (default), 900mA, 1050mA (selectable via DIP switch) Output Voltage Range: 2 – 100 V DC (depending on selected current) Input Voltage Range: 180 – 295 V AC / 254 – 417 V DC, 47 – 63 Hz Efficiency: up to 92% Auxiliary Output: 12 V / 50 mA (for fans or sensors) Inrush Current: Cold start 20A at 230 V AC No-load Power Consumption: < 1.0 W Operating Temperature: −30 °C to +90 °C (case temperature Tcase) Cooling: Fanless natural convection Protections: Short circuit, Over voltage, Over temperature Withstand Voltage: 3.75 kV AC between input and output Dimensions (L x W x H): 123.5 mm x 81.5 mm x 23 mm Weight: approx. 240 g Certifications: CE, ENEC, UL8750, CB, BIS, EAC, CCC Dimming Function: 3-in-1 dimming (0-10V DC, 10V PWM, resistance) Manufacturer Warranty: 3 years Information about the MEAN WELL LCM-40 The MEAN WELL LCM-40 is a high-performance 40W LED driver designed for maximum versatility in commercial and industrial lighting applications. Its defining feature is the multiple-stage constant current output, which allows professionals to select output currents from 350mA to 1050mA using integrated DIP switches. This flexibility ensures compatibility with a vast range of LED configurations, making it a "one-size-fits-all" solution that simplifies inventory management and technical design. With an exceptional efficiency of up to 92%, the unit ensures minimal energy loss and low heat generation during operation. Technically advanced, the LCM-40 includes a built-in 12V auxiliary DC output, perfect for powering external fans or smart sensors without the need for additional power sources. The 3-in-1 dimming interface provides seamless control via 0-10V, PWM signal, or resistance, while the synchronization capability allows up to ten drivers to be linked for uniform brightness across large lighting zones. Featuring a slim Class II plastic housing and active PFC function, this driver is the ideal choice for architectural lighting, office panels, and indoor fixtures where high reliability and superior light quality are essential requirements.

Innerhalb der EU nicht als LED-Treiber zugelassen! Not approved as an LED driver within the EU! Eine zugelassene Alternative ist z.B. die LPF-25-Serie Technische Eigenschaften des MEAN WELL APC-35-500 Leistung: 35 W Eingangsbereich: 90 bis 264 VAC  Ausgangsstrom: 0,5 A 300 VAC Spannungsschwankungen widerstehen Kompakte Bauweise Schutzart IP42 im Kunststoffgehäuse Kühlung durch freie Luftkonvektion Schutz vor Kurzschluss und Überspannung EN55032, EN55035, EN61000-3-2,  EN61000-3-3 Informationen zum MEAN WELL APC-35-500 Das Mean Well APC-35-500 ist ein kompaktes und robustes LED-Schaltnetzteil mit einer konstanten Stromausgabe von 0,5 A für vielfältige LED-Beleuchtungsanlagen wie z. B. LED-Dekorationen und LED-Reklameschilder. Am Eingang verfügt dieses Netzteil über einen weiten AC-Spannungsbereich von 90 bis 264 V (Derating bei 90 - 100 VAC) und erzeugt zudem eine geregelte Nennleistung von 35 W. Die Produktreihe von MeanWell ist weiterhin widerstandsfähig gegen 300 VAC Spannungsschwankungen für bis zu fünf Sekunden. Eine stabile Stromversorgung beim Betrieb ist so sichergestellt. Neben der Widerstandsfähigkeit zeichnen sich die Mean Well APC-35-Netzgeräte durch die kompakte und geschlossene Bauform sowie ein Design nach Schutzart IP42 aus. Damit ist die Produktserie für den ausreichenden Einsatz in verschiedensten Indoor-Bereichen gut geeignet. Darüber hinaus kann die konvektionsgekühlte MeanWell APC-35-Serie mit der lüfterlosen Konstruktion einen energieeffizienten und geräuscharmen Betrieb gewährleisten. Dabei können die LED-Netzteile der Reihe einen Wirkungsgrad von bis zu 84% erreichen. Ausgangsseitig bietet die Mean Well APC-35-Serie die Schutzmaßnahmen gegen Kurzschluss sowie Überlast. Die LED-Netzteile sind zudem konform mit den grundlegenden Sicherheitsstandards nach EN55032, EN55035, EN61000-3-2,  EN61000-3-3 sowie weiteren Normen im LED-Beleuchtungssektor. Mit hoher Zuverlässigkeit sowie herausragender Kosteneffizienz ist die Produktreihe von MeanWell die optimale Lösung für LED-Anwendungen mit kleiner Leistung. Nur für den Einbau in Geräten, die einen anderen Primärgebrauch aufweisen als die Beleuchtung, z. B.Kopiergeräte, Overhead- und Diaprojektoren oder für Skalen- und Anzeigebeleuchtung.

Discontinued Product see replacement LCM-60DA2

Technical Information & Details for MEAN WELL LPV-150-48 Power Supply Output power: 153.6 W Output voltage: 48 V DC Rated output current: 3.2 A Output current range: 0 – 3.2 A Output characteristic: constant voltage mode Ripple & noise: max. 200 mVp-p Voltage tolerance: ± 1.0% Line regulation: ± 2.0% Load regulation: ± 5.0% Input voltage range: 180 – 305 V AC / 254 – 431 V DC, 47 – 63 Hz Efficiency (typical): 90% AC input current: 1.7 A @ 230 V AC / 1.5 A @ 277 V AC Inrush current (cold start): 60 A @ 230 V AC (twidth = 900 µs, 50% Ipeak) Leakage current: max. 0.25 mA @ 240 V AC Setup & rise time: 500 ms, 50 ms @ 230 V AC / 277 V AC Hold-up time (typical): 18 ms @ 230 V AC / 20 ms @ 277 V AC (full load) Overload protection: 110 – 150% of rated output power, hiccup mode, auto recovery Over-voltage protection: 52 – 63 V DC, shutdown with automatic recovery after fault removal Over-temperature protection: output shutdown, automatic restart after cooling down Operating temperature: −25 °C to +65 °C (power derating according to derating curve) Operating humidity: 20 – 90% RH, non-condensing Storage temperature & humidity: −40 °C to +80 °C, 10 – 95% RH Temperature coefficient: ± 0.03% / °C (0 – 50 °C) Cooling: fanless design, cooling by free air convection Case material: fully insulated, flame-retardant plastic housing (UL 94V-0) Ingress protection: IP67 Dielectric strength: 3,000 V AC (input to output) Insulation resistance: > 100 MΩ @ 500 V DC, 25 °C, 70% RH Vibration resistance: 10 – 500 Hz, 2 G, 10 min./cycle along each of the X, Y, Z axes MTBF: 3,361,200 h (Telcordia SR-332, 25 °C) Dimensions (L x W x H): 191 mm x 63 mm x 37.5 mm Weight: 0.79 kg Cable connections: primary SJTW 14 AWG, secondary SJTW 18 AWG, pre‑wired leads Recommended mounting: horizontal mounting, case type LPC-150 as per mechanical drawing Safety standards: UL 8750, CSA C22.2 No. 250.13-12, UL 879, CSA C22.2 No. 207-M89, IEC/EN 62368-1, EAC EMC standards: EN 55032 (CISPR 32) Class B, EN 55035, EN 61000-3-2 Class A (≤ 80% load), EN 61000-3-3, EN 61000-4-2/3/4/5/6/8/11 Device class: Class II power unit, double insulated, no FG (earth) connection Application environment: suitable for indoor use or outdoor use without direct sunlight exposure Manufacturer warranty: 2 years Information about MEAN WELL LPV-150-48 The MEAN WELL LPV-150-48 is a 150 W LED switching power supply operating in constant voltage mode, providing a stable 48 V DC output at up to 3.2 A and making it ideal for high‑power 48 V LED modules, light bars and industrial LED systems. Its key strengths include a fully encapsulated IP67 housing for reliable use in dry, damp and wet locations, a fanless free‑air convection design for silent and low‑maintenance operation, and comprehensive protection features against short‑circuit, overload, over‑voltage and over‑temperature with automatic recovery. With its wide 180–305 V AC input range, high efficiency around 90% and long service life, the LPV-150-48 is particularly well suited for professional 48 V LED installations that require a stable supply and continuous 24/7 operation in indoor and protected outdoor environments.Only for installation in devices whose primary use is other than lighting, e.g. copiers, overhead and slide projectors, or for scale and display lighting.