ELG-200-24

Technische Eigenschaften des MEAN WELL NPF-120-24 Nennleistung: 120 W Eingangsbereich: 90 bis 305VAC Ausgangsspannung: 24 VDC Konstantsstrom + Konstantspannung (CC + CV) aktive PFC-Funktion Class II Netzgerät Schutzart IP67 Lüfterfreie Bauweise Hoher Wirkungsgrad von 90,5% Geringer Standby-Verbrauch Schutz vor Kurzschluss, Überlast sowie Überspannung Überhitzungsschutz Informationen zum MEAN WELL NPF-120-24 Beim Mean Well NPF-120-24 handelt es sich um ein kompaktes und robustes LED-Schaltnetzteil im Kunststoffgehäuse mit der integrierten aktiven PFC-Funktion für umfassende Anwendungen. Dieses Netzteil kann mit einem weltweit einsetzbaren Weitbereichseingang zwischen 90 und 305 VAC (Derating bei 90 - 100 VAC) gespeist werden und liefert zuverlässig eine geregelte Nennleistung von 120 W bei einem Ausgangsstrom von 5 A sowie einer gebräuchlichen 24 VDC Sekundärspannung. Neben der aktiven PFC-Funktion bietet die MeanWell NPF-120-Serie desweiteren die Betriebsmodi Konstantsstrom + Konstantspannung (CC + CV). Falls Sie Fragen dazu haben, können Sie sich gerne jederzeit mit uns in Verbindung setzen. Mit der Zertifizierung als Class II Schaltnetzteile sowie der Schutzart IP67 lassen sich die Mean Well NPF-120-Netzteile sowohl in trockenen als auch in feuchten Betriebsumgebungen problemlos einsetzen und eignen sich daher für Indoor- und Outdoor-Installationen wie z. B. dekorative LED-Leuchten, LED-Anzeigenschilder sowie LED-Tunnelbeleuchtungen. Außerdem sind die LED-Netzteile der MeanWell NPF-120-Serie nach dem lüfterlosen Design konzipiert und durch freie Luftkonvektion gekühlt. Diese sorgt nicht nur für einen geräuscharmen Betrieb, sondern sie gewährleistet auch einen hohen Wirkungsgrad von bis zu 90,5% bei einem niedrigen Standby-Verbrauch von weniger als 0,15 W.  Darüber hinaus verfügen die Mean Well NPF-120-Schaltnetzteile über umfassende Schutzmaßnahmen gegen Kurzschluss, Überspannung sowie Überlast. Die Produktreihe von MeanWell ist des Weiteren gegen Überhitzung geschützt und erfüllt zudem alle regulatorischen Sicherheits- und Störfestigkeitsanforderungen gemäß UL8750, EN61347-1, EN61347-2-13 sowie weiteren Standards für Netzgeräte im Bereich der LED-Beleuchtungsanlagen.

150W Konstantstrom LED Treiber 150W Constant Current LED Driver In: 100-305VAC 47-63Hz 142-431VDC / Eff. 91.5%/ 180x63x35mmOut: 24V 6.25A, 3.2-6.25A strom einstellbar , Arbeitet im CC und CV modus, IP67

Technical Information & Details for MEAN WELL ELG-150-24A-3Y LED Driver Output Power: 150 W (at 200 – 305 V AC) / 105 W (at 100 – 180 V AC) Output Voltage: 24 V DC (Constant current region: 12 – 24 V) Rated Current: 6.25 A Voltage Adjustment Range: 21.6 – 26.4 V (via internal potentiometer) Current Adjustment Range: 3.2 – 6.25 A (via internal potentiometer) Input Cable Option (-3Y): 3-wire AC input cable with Protective Earth (PE) ground wire (Class I) Ripple & Noise (max.): ≤ 200 mVp-p Voltage Tolerance: ±2.0% Input Voltage Range: 100 – 305 V AC / 142 – 431 V DC Efficiency (Typ.): 88.5% Power Factor (PF): PF ≥ 0.97 at 115 V AC / PF ≥ 0.95 at 230 V AC / PF ≥ 0.92 at 277 V AC (at full load) Ingress Protection: IP65 (suitable for indoor and outdoor installations) Operating Temperature: Tcase −40 °C to +90 °C (max. case temperature +90 °C) Cooling: Fanless free air convection Protections: Over current (95 – 108%, constant current limiting), Short circuit (hiccup mode), Over voltage (28 – 34 V), Over temperature Form Factor / Housing: Metal housing design with 3-core input cable (Class I) Dimensions (L x W x H): 219 mm x 63 mm x 35.5 mm Weight: Approx. 0.95 kg Manufacturer Warranty: 5 Years Information about MEAN WELL ELG-150-24A-3Y The MEAN WELL ELG-150-24A-3Y is a high-performance 150W AC/DC LED power supply featuring dual mode constant voltage and constant current output. Housed in a durable metal casing, it accepts a wide input voltage range of 100 to 305 V AC and provides a 24 V DC output with a rated current of up to 6.25 A (150 W output at 200–305 V AC). As an A-Type model, it features an IP65 rating and built-in potentiometers for adjusting both output voltage (21.6 to 26.4 V) and current (3.2 to 6.25 A). The -3Y designation indicates a factory-fitted 3-core AC input cable including dedicated Protective Earth ground for European compliance. Designed with fanless free air convection cooling, it operates efficiently across case temperatures ranging from −40 °C to +90 °C, making it suitable for indoor and outdoor installations such as LED street lighting, architectural lighting, and floodlighting. Equipped with active PFC, built-in protection circuitry, and a lifetime expectancy exceeding 50,000 hours, it is backed by a 5-year manufacturer warranty.

Technical Information & Details about the MEAN WELL HDR-60-12 Power Supply Output Power: 60 W Output Voltage: 12 V DC Output Current: 4,5 A Current Range: 0 – 4,5 A Input Voltage Range: 85 – 264 V AC (277 V AC operational) / 120 – 370 V DC (390 V DC operational), 47 – 63 Hz Efficiency: up to 88 % Ripple & Noise: ≤ 120 mVp-p Output Voltage Adjustment Range: 10,8 – 13,8 V DC Voltage Tolerance: ±1,0 % Line Regulation: ±1,0 % Load Regulation: ±1,0 % Setup, Rise Time: 500 ms, 50 ms @230 V AC / 115 V AC (full load) Hold-up Time: 30 ms @230 V AC / 12 ms @115 V AC (full load) Inrush Current: 30 A @115 V AC / 60 A @230 V AC (cold start) No-load Power Consumption: < 0.3 W Operating Temperature: −30 °C to +70 °C (with derating according to curve) Cooling: fanless free air convection Protection Functions: short circuit (hiccup mode, auto recovery), overload (constant current limiting 50–100 % of rated output voltage, auto recovery), overvoltage (shut down, re‑power to recover) Overvoltage Category: OVC III (up to 2000 m altitude) Isolation Voltage: 4000 V AC between input and output Isolation Resistance: ≥ 100 MΩ @ 500 V DC, 25 °C, 70 % RH Dimensions (W x H x D): 52,5 mm x 90 mm x 54,5 mm Weight: approx. 190 g Housing Material: insulating plastic, Class II, ultra-slim step-shape Mounting: DIN rail TS35/7,5 or TS35/15 Safety & EMC Certifications: IEC 62368-1, UL 62368-1, UL 508, TUV BS EN/EN 61558-2-16, BS EN/EN 61558-1, EAC TP TC 004, BSMI, BIS IS13252, compliant with BS EN/EN 55032, BS EN/EN 55035, BS EN/EN 61000-6-2, BS EN/EN 61204-3 LED Indicator: Power On LED indicator Manufacturer Warranty: 3 years About the MEAN WELL HDR-60-12 The MEAN WELL HDR-60-12 is a 60 W ultra-slim DIN-rail power supply that delivers a robust 12 V DC / 4,5 A output in a compact 52,5 mm wide step-shape housing, ideal for space-constrained distribution boards and industrial control cabinets. Its wide 85–264 V AC / 120–370 V DC input range and high efficiency up to 88 % support energy-efficient operation in building automation, home automation, and industrial control environments. The adjustable 10,8–13,8 V output range allows precise tuning of the 12 V bus to compensate for line voltage drops, ensuring reliable supply for relays, actuators, sensors, and control electronics. The Class II plastic enclosure provides reinforced insulation and eliminates the need for a protective earth connection, which improves electrical safety and simplifies installation. With fanless free air convection, low no-load power consumption below 0.3 W, a wide operating temperature range from −30 °C to +70 °C, and comprehensive protection and certification features, the HDR-60-12 is a durable, low-maintenance 12 V power solution for demanding household and industrial automation projects.

Technical Information & Details for the MEAN WELL MDR-10-24 Power Supply Output Power: 10 W Output Voltage: 24 V DC Output Current: 0.42 A Input Voltage Range: 85 – 264 V AC / 120 – 370 V DC, 47 – 63 Hz Efficiency: 84 % Ripple & Noise: ≤ 150 mVp-p Inrush Current: max. 35 A @115 VAC / 70 A @230 VAC No-load Power Consumption: < 0.75 W Operating Temperature: -20 °C to +70 °C Cooling: Free air convection Protections: Short circuit, Overload, Over voltage Isolation Resistance: 100M Ohms / 500VDC Dimensions (W x H x D): 22.5 mm x 90 mm x 100 mm Weight: 0.15 kg Safety & EMC Certificates: UL508, TUV EN62368-1, EAC, CB, BSMI, CE LED Indicator: Power On LED indicator Manufacturer Warranty: 3 Years Information on the MEAN WELL MDR-10-24 The MEAN WELL MDR-10-24 is a high-performance 24V DC industrial power supply designed for efficient mounting on DIN rail TS-35/7.5 or 15. Its ultra-slim 22.5mm profile significantly optimizes space within industrial control panels and cabinets. A key competitive advantage is the built-in DC OK active signal, providing a dedicated interface for remote monitoring and system health checks. This unit is engineered for energy efficiency, boasting an 84% typical efficiency rating and a low no-load power consumption of less than 0.75W. Operating via fanless free air convection cooling, it ensures silent and reliable performance across a wide temperature range. Safety is prioritized with specialized hiccup-mode protection against short circuits and overloads, complemented by rigorous 100% full load burn-in testing. With a 3-year warranty and global certifications, the MDR-10-24 is a dependable choice for powering PLCs, sensors, and other 24V automation components.