IDLV-65-36 End of Life

Technical Information & Details of the MEAN WELL PWM-60-36 LED Driver Output power: 60.12 W DC output voltage: 36 V DC Rated output current: 1.67 A Output type: Constant voltage PWM style output Dimming range: 0 – 100 % (3‑in‑1: 0–10 VDC, 10 V PWM signal, or resistance; DA/DA2: DALI/DALI‑2) PWM output frequency: approx. 1.47 kHz (Blank/DA-Type), approx. 2.5 kHz (DA2-Type) Overvoltage protection threshold: 41 – 46 V DC Setup / rise time: ≤ 500 ms, 80 ms @ 115 / 230 VAC (full load) Hold‑up time (typ.): approx. 16 ms @ 115 / 230 VAC (full load) Input voltage range: 90 – 305 V AC / 127 – 431 V DC, 47 – 63 Hz Power factor (typ.): PF > 0.97 @ 115 VAC, PF > 0.95 @ 230 VAC, PF > 0.92 @ 277 VAC (full load) Efficiency (typ.): approx. 90 % AC input current (typ.): 0.8 A @ 115 VAC / 0.4 A @ 230 VAC / 0.32 A @ 277 VAC Inrush current (typ.): cold start, 50 A @ 230 VAC (≈270 μs at 50 % Ipeak) Leakage current: < 0.25 mA @ 277 VAC Overload protection: 108 – 130 % of rated output power, hiccup mode, auto recovery Overvoltage protection: Shut down output voltage, re‑power on to recover Overtemperature protection: Shut down output voltage, re‑power on to recover (DA2-Type: hiccup mode) Short‑circuit protection: Hiccup mode, auto recovery Operating temperature (case Tcase): −40 °C to +85 °C (derating according to “OUTPUT LOAD vs TEMPERATURE”) Operating humidity: 20 – 95 % RH, non‑condensing Storage temperature / humidity: −40 °C to +80 °C, 10 – 95 % RH Temperature coefficient: ± 0.03 % / °C (0 – 50 °C) Vibration: 10 – 500 Hz, 5 G, 12 min./cycle, 72 min. along X, Y, Z axes Withstand voltage: 3.75 kVAC (input–output), 1.5 kVAC (input–DA), 1.5 kVAC (output–DA) Isolation resistance: > 100 MΩ @ 500 V DC, 25 °C, 70 % RH Safety standards: UL8750 (type “HL”, except DA-Type), UL879 (for 12 V / 24 V Blank-Type), ENEC EN 61347‑1, EN 61347‑2‑13 (independent), EN 62384, BIS IS 15885 (Part 2/Sec 13 for 12/24/48 Blank and 12/24‑DA2), EAC TP TC 004, GB19510.1, GB19510.14; design refers to EN 60335‑1; IP67; suitable for emergency installations (EL) per EN 61347‑2‑13 Annex J DALI standards (DA/DA2): IEC 62386‑101/102/207/251, Device Type 6 (DT6) EMC emission: EN 55015, EN 61000‑3‑2 Class C (≥60 % load), EN 61000‑3‑3, GB/T 17743, GB17625.1, EAC TP TC 020 EMC immunity: EN 61000‑4‑2,3,4,5,6,8,11; EN 61547 (light industry level, surge Line–Line 2 kV), EAC TP TC 020 MTBF (typ.): 2,626,600 h (Telcordia SR‑332, 25 °C) / 227,100 h (MIL‑HDBK‑217F, 25 °C) Dimensions (L x W x H): 150 mm x 53 mm x 35 mm Weight: approx. 0.49 kg Case & protection: fully encapsulated plastic case, IP67, Class II / Class 2 No‑load power consumption: < 0.5 W Design: 60 W constant‑voltage PWM LED driver, Class 2, LPS Information about the MEAN WELL PWM-60-36 The MEAN WELL PWM‑60‑36 is a 60 W constant‑voltage LED driver with a PWM‑style output, optimized for 36 V LED strips and other 36 V DC constant‑voltage LED loads where brightness uniformity and color stability across the entire dimming range are critical. Its PWM operation at around 1.47 kHz (Blank/DA) or 2.5 kHz (DA2) provides fine, flicker‑free dimming behaviour even at low light levels. With typical efficiency of about 90 %, active power factor correction and a wide 90–305 V AC input range, the driver offers energy‑efficient performance suitable for worldwide installations. The fully encapsulated IP67 plastic housing, −40 to +85 °C case temperature rating and comprehensive protection features (short‑circuit, overload, overvoltage and overtemperature) ensure robust and reliable operation in dry, damp and wet environments, including use in defined emergency lighting systems. The integrated 3‑in‑1 dimming interface (0–10 V, 10 V PWM signal, resistance) on the Blank type, together with optional DALI or DALI‑2 control for DA/DA2 variants, provides high flexibility for integration into modern lighting control and building automation systems. Combined with long lifetime ratings and extensive international safety and EMC approvals, the PWM‑60‑36 is a strong choice for professional 36‑V LED strip lighting, architectural and industrial lighting projects that require a dependable constant‑voltage PWM LED driver.

Technical Information & Details of the MEAN WELL PWM-40-36 LED Driver Output power: 40.32 W DC output voltage: 36 V DC Rated output current: 1.12 A Output type: Constant voltage PWM style output Dimming range: 0 – 100 % (3‑in‑1: 0–10 VDC, 10 V PWM signal, or resistance) PWM output frequency: approx. 1.47 kHz Overvoltage protection threshold: 41 – 46 V DC Setup / rise time: ≤ 500 ms, 80 ms @ 115 / 230 VAC (full load) Hold‑up time (typ.): approx. 16 ms @ 115 / 230 VAC (full load) Input voltage range: 90 – 305 V AC / 127 – 431 V DC, 47 – 63 Hz Power factor (typ.): PF > 0.97 @ 115 VAC, PF > 0.95 @ 230 VAC, PF > 0.92 @ 277 VAC (full load) Efficiency (typ.): approx. 90 % AC input current (typ.): 0.6 A @ 115 VAC / 0.3 A @ 230 VAC / 0.25 A @ 277 VAC Inrush current (typ.): cold start, 50 A @ 230 VAC (≈270 μs at 50 % Ipeak) Leakage current: < 0.25 mA @ 277 VAC Overload protection: 108 – 130 % of rated output power, hiccup mode, auto recovery Overvoltage protection: Shut down output voltage, re‑power on to recover Overtemperature protection: Shut down output voltage, re‑power on to recover Short‑circuit protection: Hiccup mode, auto recovery Operating temperature (case Tcase): −40 °C to +85 °C (see “Output load vs temperature” derating) Operating humidity: 20 – 95 % RH, non‑condensing Storage temperature / humidity: −40 °C to +80 °C, 10 – 95 % RH Temperature coefficient: ± 0.03 % / °C (0 – 50 °C) Vibration: 10 – 500 Hz, 5 G, 12 min./cycle, 72 min. along X, Y, Z axes Withstand voltage: 3.75 kVAC between input and output Isolation resistance: > 100 MΩ @ 500 V DC, 25 °C, 70 % RH Safety standards: UL8750 (type “HL”), CSA C22.2 No. 250.13‑12, ENEC EN 61347‑1, EN 61347‑2‑13 (independent), EN 62384, EAC TP TC 004, GB19510.1, GB19510.14; IP67 EMC emission: EN 55015, EN 61000‑3‑2 Class C (≥60 % load), EN 61000‑3‑3, GB/T 17743, GB17625.1, EAC TP TC 020 EMC immunity: EN 61000‑4‑2,3,4,5,6,8,11; EN 61547 (light industry level, surge Line–Line 2 kV), EAC TP TC 020 MTBF (typ.): 2,625,400 h (Telcordia SR‑332, 25 °C) / 226,400 h (MIL‑HDBK‑217F, 25 °C) Dimensions (L x W x H): 150 mm x 53 mm x 35 mm Weight: approx. 0.49 kg Case & protection: fully encapsulated plastic case, IP67, Class II No‑load power consumption: < 0.5 W Design: constant‑voltage PWM LED driver, Class 2, LPS Information about the MEAN WELL PWM-40-36 The MEAN WELL PWM‑40‑36 is a 40 W constant‑voltage LED driver with a PWM‑style output at around 1.47 kHz, optimized for driving 36 V LED strips while preserving color temperature and brightness uniformity across the entire dimming range. This makes it highly suitable for professional LED strip lighting, linear fixtures and architectural lighting systems requiring stable 36 V DC. With typical efficiency up to 90 %, active power factor correction and a wide 90–305 V AC input range, the driver offers energy‑efficient, globally compatible operation. Its fully encapsulated IP67 housing, wide −40 to +85 °C case temperature capability and robust protection features (short‑circuit, overload, overvoltage and overtemperature in hiccup/shutdown mode) ensure long‑term reliability in dry, damp and wet locations. The integrated 3‑in‑1 dimming interface (0–10 V, 10 V PWM signal, resistance) with dim‑to‑off support gives excellent flexibility for modern lighting controls and building automation. Together with extensive international safety and EMC approvals, the PWM‑40‑36 is an excellent choice for demanding commercial and industrial 36‑V LED strip and constant‑voltage lighting applications. xml Technische Informationen & Details zum MEAN WELL PWM-40-36 LED-Treiber Ausgangsleistung: 40,32 W DC-Ausgangsspannung: 36 V DC Nennausgangsstrom: 1,12 A Ausgangstyp: Konstantspannung mit PWM-Ausgang (PWM‑Style) Dimm­bereich: 0 – 100 % (3‑in‑1: 0–10 VDC, 10 V PWM-Signal oder Widerstand) PWM-Ausgangsfrequenz: ca. 1,47 kHz Überspannungsschutz-Schwelle: 41 – 46 V DC Einschalt- / Anstiegszeit: ≤ 500 ms, 80 ms @ 115 / 230 VAC (Volllast) Hold-Up-Time (typ.): ca. 16 ms @ 115 / 230 VAC (Volllast) Eingangsspannungsbereich: 90 – 305 V AC / 127 – 431 V DC, 47 – 63 Hz Leistungsfaktor (typ.): PF > 0,97 @ 115 VAC, PF > 0,95 @ 230 VAC, PF > 0,92 @ 277 VAC (Volllast) Wirkungsgrad (typ.): ca. 90 % AC-Eingangsstrom (typ.): 0,6 A @ 115 VAC / 0,3 A @ 230 VAC / 0,25 A @ 277 VAC Einschaltstrom (typ.): Kaltstart, 50 A @ 230 VAC (≈270 μs bei 50 % Ipeak) Leckstrom: < 0,25 mA @ 277 VAC Überlastschutz: 108 – 130 % der Nennausgangsleistung, Hiccup-Modus, automatische Wiederherstellung Überspannungsschutz: Abschalten der Ausgangsspannung, Wiederanlauf nach Netztrennung Übertemperaturschutz: Abschalten der Ausgangsspannung, Wiederanlauf nach Abkühlung/Netztrennung Kurzschlussschutz: Hiccup-Modus, automatische Wiederherstellung Arbeitstemperatur (Gehäuse Tcase): −40 °C bis +85 °C (Derating gemäß „OUTPUT LOAD vs TEMPERATURE“) Betriebsfeuchtigkeit: 20 – 95 % RH, nicht kondensierend Lagerbedingungen: −40 °C bis +80 °C, 10 – 95 % RH Temperaturkoeffizient: ± 0,03 % / °C (0 – 50 °C) Vibration: 10 – 500 Hz, 5 G, 12 min./Zyklus, 72 min. je Achse (X, Y, Z) Isolationsspannung: 3,75 kV AC zwischen Eingang und Ausgang Isolationswiderstand: > 100 MΩ @ 500 V DC, 25 °C, 70 % RH Sicherheitsstandards: UL8750 (Typ „HL“), CSA C22.2 Nr. 250.13‑12, ENEC EN 61347‑1, EN 61347‑2‑13 (unabhängig), EN 62384, EAC TP TC 004, GB19510.1, GB19510.14; Schutzart IP67 EMV-Emission: EN 55015, EN 61000‑3‑2 Klasse C (ab 60 % Last), EN 61000‑3‑3, GB/T 17743, GB17625.1, EAC TP TC 020 EMV-Störfestigkeit: EN 61000‑4‑2,3,4,5,6,8,11; EN 61547 (Lichtindustrie‑Level, Surge Line–Line 2 kV), EAC TP TC 020 MTBF (typ.): 2.625.400 h (Telcordia SR‑332, 25 °C) / 226.400 h (MIL‑HDBK‑217F, 25 °C) Abmessungen (L x B x H): 150 mm x 53 mm x 35 mm Gewicht: ca. 0,49 kg Gehäuse & Schutzart: vollvergossenes Kunststoffgehäuse, IP67, Klasse II Leerlaufleistungsaufnahme: < 0,5 W Ausführung: Konstantspannungs-PWM-LED-Treiber, Class 2, LPS Informationen zum MEAN WELL PWM-40-36 Der MEAN WELL PWM‑40‑36 ist ein 40‑W‑Konstantspannungs‑LED‑Treiber mit PWM-Ausgang bei ca. 1,47 kHz, der speziell für den Betrieb von 36‑V‑LED‑Streifen entwickelt wurde und Farbtemperatur sowie Helligkeits­homogenität über den gesamten Dimm­bereich erhält. Damit eignet er sich hervorragend für professionelle LED‑Streifenbeleuchtung, lineare Leuchten und architektonische Lichtlösungen mit 36 V DC. Mit einem typischen Wirkungsgrad von rund 90 %, aktivem Leistungsfaktorkorrektur‑Schaltkreis und einem weiten Eingangsspannungsbereich von 90–305 V AC arbeitet der Treiber sehr energieeffizient und ist weltweit einsetzbar. Das vollständig vergossene IP67‑Gehäuse, der große Tcase‑Bereich von −40 bis +85 °C sowie die umfassenden Schutzfunktionen (Kurzschluss, Überlast, Überspannung und Übertemperatur im Hiccup‑/Shutdown‑Modus) sorgen für hohe Betriebssicherheit in trockenen, feuchten und nassen Umgebungen. Die integrierte 3‑in‑1‑Dimmfunktion (0–10 V, 10 V PWM, Widerstand) mit „dim‑to‑off“ bietet maximale Flexibilität bei der Einbindung in moderne Steuer‑ und Gebäudetechniksysteme. Zusammen mit den umfangreichen internationalen Sicherheits‑ und EMV‑Zertifizierungen ist der PWM‑40‑36 eine ideale Wahl für anspruchsvolle 36‑V‑LED‑Streifen‑ und Konstantspannungs‑Anwendungen in gewerblichen und industriellen Projekten.

Technical Information & Details for the MEAN WELL SLD-50-24 Power Supply Output Power: 50.4 W Output Voltage: 24 V DC Output Current: 2.1 A Input Voltage Range: 110 – 305 V AC / 155 – 431 V DC Efficiency: 88 % Ripple & Noise: ≤ 240 mVp-p Inrush Current: 50 A at 230 VAC No-load Power Consumption: < 0.5 W Operating Temperature: -20 °C to +90 °C (Tcase) Cooling: Fanless free air convection Protection Functions: Short circuit, Over current, Over voltage, Over temperature Isolation Class: Class 2 / II power unit Isolation Voltage: 3.75 KV AC Dimensions (L x W x H): 280 mm x 30 mm x 16.8 mm Weight: 0.175 Kg Safety & EMC Certificates: UL8750, ENEC EN61347-1, BS EN/EN62384, EAC, IS15885 Design Type: Ultra-slim linear housing Manufacturer Warranty: 3 years Information about the MEAN WELL SLD-50-24 The MEAN WELL SLD-50-24 is a high-performance 50W LED driver characterized by its ultra-slim and linear housing design, which stands at a mere 16.8mm in height. This low-profile architecture is specifically engineered for seamless integration into signage, troffer lighting, and modern linear luminaires where vertical clearance is extremely limited. The driver features a unique dual-mode output, allowing it to function effectively in both Constant Voltage and Constant Current regions, providing the versatility to drive LED strips or power modules directly. With an efficiency of 88% and a fanless design, the unit operates reliably via free air convection, maintaining stable performance even at case temperatures reaching up to 90°C. Beyond its physical aesthetics, the SLD-50-24 offers industrial-grade reliability with a wide input range of 110 to 305VAC and a built-in active PFC function to ensure high power factor quality across various loads. Safety is integrated at every level, as the unit is a Class 2 power unit and includes comprehensive protections against short circuits, over-voltage, and over-temperature. The hiccup mode protection ensures the device recovers automatically once fault conditions are removed, making it an ideal "install-and-forget" solution for commercial decoration and cove lighting. By adhering to global standards such as UL8750 and ENEC, this driver represents a secure, high-quality power solution for professional lighting designers requiring a balance of minimalist form and maximum durability.

Technical Information & Details for the MEAN WELL SLD-50-56 Power Supply Output Power: 50.4 W Output Voltage: 56 V DC Output Current: 0.9 A Input Voltage Range: 110 – 305 V AC / 155 – 431 V DC Efficiency: 90 % Ripple & Noise: ≤ 350 mVp-p Inrush Current: 50 A at 230 VAC No-load Power Consumption: < 0.5 W Operating Temperature: -20 °C to +90 °C (Tcase) Cooling: Fanless free air convection Protection Functions: Short circuit, Over current, Over voltage, Over temperature Isolation Class: Class 2 / II power unit Isolation Voltage: 3.75 KV AC Dimensions (L x W x H): 280 mm x 30 mm x 16.8 mm Weight: 0.175 Kg Safety & EMC Certificates: UL8750, ENEC EN61347-1, BS EN/EN62384, EAC Design Type: Ultra-slim linear housing Manufacturer Warranty: 3 years Information about the MEAN WELL SLD-50-56 The MEAN WELL SLD-50-56 is a high-voltage specialized LED driver featuring an ultra-slim linear design with a height of only 16.8mm, making it the ideal choice for modern linear luminaires and slim troffer lighting. This model is specifically engineered to handle higher voltage requirements while maintaining a dual-mode Constant Voltage and Constant Current output, providing maximum flexibility for professional lighting installations. With an impressive efficiency of up to 90%, the unit operates reliably under natural convection cooling, which eliminates the need for noisy fans and significantly reduces the overall thermal footprint within tight mounting spaces. In addition to its compact form factor, the SLD-50-56 excels in performance with a wide input range of 110 to 305VAC and an integrated active PFC function for superior power quality. It is designed as a Class 2 power unit and features comprehensive safety protocols, including short circuit, over-voltage, and over-temperature protection with automatic recovery. This driver is particularly optimized for signage, cove lighting, and decorative lighting applications where high-voltage stability and a low-profile aesthetic are required. Its hiccup mode protection and robust housing ensure long-term durability and consistent performance in demanding commercial environments.

Technical Information & Details for the MEAN WELL SLD-80-24 Power Supply Output Power: 79.2 W Output Voltage: 24 V DC Output Current: 3.3 A Input Voltage Range: 110 – 305 V AC / 155 – 431 V DC, 47 – 63 Hz Efficiency: 90.5 % Ripple & Noise: ≤ 240 mVp-p Inrush Current: 50 A @ 230 VAC (Cold Start) No-load Power Consumption: < 0.5 W Operating Temperature: −20 °C to +90 °C (Case Temperature) Cooling: Fanless free air convection Protection Functions: Short circuit, Over current, Over voltage, Over temperature Safety Class: Class II (no FG), Class 2 power unit Isolation Voltage: 3.75 kV AC (I/P to O/P) Dimensions (L x W x H): 320 mm x 30 mm x 16.8 mm Weight: 0.206 kg Safety & EMC Certificates: UL8750, EN61347, EN62384, EAC, CB, CE Special Feature: Dual mode Constant Voltage + Constant Current output Manufacturer Warranty: 3 Years Information about the MEAN WELL SLD-80-24 The MEAN WELL SLD-80-24 is a specialized 80W AC/DC LED driver that stands out for its extraordinarily slim and linear housing. With a profile height of only 16.8 mm, it is perfectly suited for space-constrained installations such as signage, troffer lighting, and cove lighting. Its unique dual-mode output allows it to operate in either Constant Voltage or Constant Current regions, providing designers with the versatility to drive LED strips or direct LED modules within a constant current range of 16.8V to 24V without requiring additional components. Engineered for high-performance environments, the SLD-80-24 achieves a superior efficiency of 90.5% and features a built-in active PFC function for optimal power management. The unit is designed to be highly reliable, operating silently via free air convection at case temperatures up to 90°C. It supports a wide input voltage range of 110 to 305V AC, making it compatible with global industrial and commercial electrical systems. Backed by a 3-year warranty and a full array of safety protections, this power supply is a top-tier choice for professional decoration and commercial signage projects that demand a low physical footprint.

Technical Information & Details for the MEAN WELL SLD-80-56 Power Supply Output Power: 81.2 W Output Voltage: 56 V DC Output Current: 1.45 A Input Voltage Range: 110 – 305 V AC / 155 – 431 V DC, 47 – 63 Hz Efficiency: 92 % Ripple & Noise: ≤ 350 mVp-p Inrush Current: 50 A @ 230 VAC (Cold Start) No-load Power Consumption: < 0.5 W Operating Temperature: −20 °C to +90 °C (Case Temperature) Cooling: Fanless free air convection Protection Functions: Short circuit, Over current, Over voltage, Over temperature Safety Class: Class II (no FG), SELV design Isolation Voltage: 3.75 kV AC (I/P to O/P) Dimensions (L x W x H): 320 mm x 30 mm x 16.8 mm Weight: 0.206 kg Safety & EMC Certificates: UL8750, EN61347, EN62384, EAC, CB, CE Special Feature: Constant Current region 30V ~ 56V Manufacturer Warranty: 3 Years Information about the MEAN WELL SLD-80-56 The MEAN WELL SLD-80-56 is an 80W LED driver distinguished by its exceptionally slim linear profile, engineered to solve space constraints in architectural and decorative lighting. With a height of merely 16.8 mm, it fits perfectly into narrow troffer lighting, cove channels, and modern signage displays. This model is particularly effective for high-voltage LED strings, offering a versatile dual-mode output that functions as a 56V constant voltage source or as a constant current driver within the 30V to 56V range, ensuring optimal performance for diverse lighting architectures. Performance is a hallmark of the SLD-80-56, boasting an impressive 92% efficiency that facilitates reliable fanless operation through natural air convection. It is equipped with built-in active PFC and supports a wide input voltage range up to 305V AC, making it compatible with global commercial power systems including 277V industrial lines. The unit is designed for maximum thermal endurance, maintaining stability at case temperatures up to 90°C. Combined with a comprehensive protection suite and a 3-year warranty, this driver represents a highly durable and efficient solution for professional-grade linear luminaires and retail lighting applications.

In: 180-264VAC 47-63Hz  255-373VDCOut: 24VDC / 30W / 1,25A / Eff. 86% / 76x32x48mm

In: 180-264VAC 47-63Hz  255-373VDCOut: 48VDC / 30W / 0,625A / Eff. 89% / 76x32x48mm

In: 180-264VAC 47-63Hz  255-373VDCOut: 24VDC / 60W / 2,5A / Eff. 86% / 76x32x48mm

In: 180-264VAC 47-63Hz  255-373VDCOut: 48VDC / 60W / 1,25A / Eff. 89% / 76x32x48mm