• Output power: 60.12 W
• DC output voltage: 36 V DC
• Rated output current: 1.67 A
• Output type: Constant voltage PWM style output
• Dimming range: 0 – 100 % (3‑in‑1: 0–10 VDC, 10 V PWM signal, or resistance; DA/DA2: DALI/DALI‑2)
• PWM output frequency: approx. 1.47 kHz (Blank/DA-Type), approx. 2.5 kHz (DA2-Type)
• Overvoltage protection threshold: 41 – 46 V DC
• Setup / rise time: ≤ 500 ms, 80 ms @ 115 / 230 VAC (full load)
• Hold‑up time (typ.): approx. 16 ms @ 115 / 230 VAC (full load)
• Input voltage range: 90 – 305 V AC / 127 – 431 V DC, 47 – 63 Hz
• Power factor (typ.): PF > 0.97 @ 115 VAC, PF > 0.95 @ 230 VAC, PF > 0.92 @ 277 VAC (full load)
• Efficiency (typ.): approx. 90 %
• AC input current (typ.): 0.8 A @ 115 VAC / 0.4 A @ 230 VAC / 0.32 A @ 277 VAC
• Inrush current (typ.): cold start, 50 A @ 230 VAC (≈270 μs at 50 % I_peak)
• Leakage current: < 0.25 mA @ 277 VAC
• Overload protection: 108 – 130 % of rated output power, hiccup mode, auto recovery
• Overvoltage protection: Shut down output voltage, re‑power on to recover
• Overtemperature protection: Shut down output voltage, re‑power on to recover (DA2-Type: hiccup mode)
• Short‑circuit protection: Hiccup mode, auto recovery
• Operating temperature (case T_case): −40 °C to +85 °C (derating according to “OUTPUT LOAD vs TEMPERATURE”)
• Operating humidity: 20 – 95 % RH, non‑condensing
• Storage temperature / humidity: −40 °C to +80 °C, 10 – 95 % RH
• Temperature coefficient: ± 0.03 % / °C (0 – 50 °C)
• Vibration: 10 – 500 Hz, 5 G, 12 min./cycle, 72 min. along X, Y, Z axes
• Withstand voltage: 3.75 kVAC (input–output), 1.5 kVAC (input–DA), 1.5 kVAC (output–DA)
• Isolation resistance: > 100 MΩ @ 500 V DC, 25 °C, 70 % RH
• Safety standards: UL8750 (type “HL”, except DA-Type), UL879 (for 12 V / 24 V Blank-Type), ENEC EN 61347‑1, EN 61347‑2‑13 (independent), EN 62384, BIS IS 15885 (Part 2/Sec 13 for 12/24/48 Blank and 12/24‑DA2), EAC TP TC 004, GB19510.1, GB19510.14; design refers to EN 60335‑1; IP67; suitable for emergency installations (EL) per EN 61347‑2‑13 Annex J
• DALI standards (DA/DA2): IEC 62386‑101/102/207/251, Device Type 6 (DT6)
• EMC emission: EN 55015, EN 61000‑3‑2 Class C (≥60 % load), EN 61000‑3‑3, GB/T 17743, GB17625.1, EAC TP TC 020
• EMC immunity: EN 61000‑4‑2,3,4,5,6,8,11; EN 61547 (light industry level, surge Line–Line 2 kV), EAC TP TC 020
• MTBF (typ.): 2,626,600 h (Telcordia SR‑332, 25 °C) / 227,100 h (MIL‑HDBK‑217F, 25 °C)
• Dimensions (L x W x H): 150 mm x 53 mm x 35 mm
• Weight: approx. 0.49 kg
• Case & protection: fully encapsulated plastic case, IP67, Class II / Class 2
• No‑load power consumption: < 0.5 W
• Design: 60 W constant‑voltage PWM LED driver, Class 2, LPS

Information about the MEAN WELL PWM-60-36

The MEAN WELL PWM‑60‑36 is a 60 W constant‑voltage LED driver with a PWM‑style output, optimized for 36 V LED strips and other 36 V DC constant‑voltage LED loads where brightness uniformity and color stability across the entire dimming range are critical. Its PWM operation at around 1.47 kHz (Blank/DA) or 2.5 kHz (DA2) provides fine, flicker‑free dimming behaviour even at low light levels.

With typical efficiency of about 90 %, active power factor correction and a wide 90–305 V AC input range, the driver offers energy‑efficient performance suitable for worldwide installations. The fully encapsulated IP67 plastic housing, −40 to +85 °C case temperature rating and comprehensive protection features (short‑circuit, overload, overvoltage and overtemperature) ensure robust and reliable operation in dry, damp and wet environments, including use in defined emergency lighting systems.

The integrated 3‑in‑1 dimming interface (0–10 V, 10 V PWM signal, resistance) on the Blank type, together with optional DALI or DALI‑2 control for DA/DA2 variants, provides high flexibility for integration into modern lighting control and building automation systems. Combined with long lifetime ratings and extensive international safety and EMC approvals, the PWM‑60‑36 is a strong choice for professional 36‑V LED strip lighting, architectural and industrial lighting projects that require a dependable constant‑voltage PWM LED driver.