Skip to main content
Go to homepage

APV-25-24

Product information "APV-25-24"

Innerhalb der EU nicht als LED-Treiber zugelassen!

Not approved as an LED driver within the EU!

Eine zugelassene Alternative ist z.B. die LPF-25-Serie

Technische Eigenschaften des MEAN WELL APV-25-24

  • Nennleistung: 25,2 W
  • AC-Eingangsbereich: 90 bis 264 V
  • Ausgangsspannung: 24 VDC
  • 300 VAC Spannungsschwankungen widerstehen
  • Kompakte Bauform
  • Schutzart IP42 im Kunststoffgehäuse
  • Kühlung durch freie Luftkonvektion
  • kurzschlussfest
  • Schutz vor Überspannung und Überlast

Informationen zum MEAN WELL APV-25-24

Das Mean Well APV-25-24 ist ein leistungsfähiges LED-Schaltnetzteil für Niederspannungsanlagen wie z. B. LED-Dekorationen und LED-Anzeigenschilder. Es erzeugt eine geregelte 25,2 W Nennleistung bei einer vielfältig einsetzbaren Konstantspannung von 24 VDC sowie bei einem Strom von 1,05 A. Am Eingang kann dieses Netzgerät mit einem weiten AC-Spannungsbereich zwischen 90 und 264 V (Derating bei 90 – 100 VAC) gespeist werden. Die sämtliche Produktreihe von MeanWell ist des Weiteren widerstandsfähig gegen 300 VAC Spannungsschwankungen für bis zu fünf Sekunden. Damit ist eine stabile Stromversorgung und ein sicherer Betrieb gewährleistet. 

Neben der Widerstandsfähigkeit zeichnen sich die Mean Well APV-25-Modelle weiterhin durch ihre kompakte und geschlossene Bauform sowie die Schutzart IP42 aus. Damit kann Produktreihe von MeanWell in verschiedensten Indoor-Bereiche eingesetzt werden. Die lüfterlose LED-Netzgeräte der Mean Well LPV-25-Serie verfügen außerdem über die Kühlung durch freie Luftkonvektion und können daher einen geräuscharmen Betrieb mit einer guten Arbeitseffizienz gewährleisten. Dabei erzielt die Produktserie von MeanWell einen Wirkungsgrad von bis zu 84%.

Ausgangsseitig bieten die kurzschlussfesten LED-Netzteile der Mean Well APV-25-Serie einen Schutz gegen Überspannung sowie Überlast. Die Produktreihe von MeanWell ist konform mit den grundlegenden Sicherheitsnormen nach UL8750, EN61000-3-2, EN55035 sowie weiteren Anforderungen für die zuverlässige Versorgung von LED-Schaltnetzteilen.

Nur für den Einbau in Geräten, die einen anderen Primärgebrauch aufweisen als die Beleuchtung, z. B.
Kopiergeräte, Overhead- und Diaprojektoren oder für Skalen- und Anzeigebeleuchtung.


Verfügbare Downloads
Download APV-25 Datenblatt
Eigenschaften für "APV-25-24"
Approval: CE, UL
Efficiency: 83%
Height: 29,5
Length: 84
Protection Class: Class 2, Class II
Protection Rating: IP42
Rated current: 1,05
Series: APV
Voltage: 24 VDC
Warranty: 2 years
Wattage: 18 W, 20 W, 25 W
Weight: 0,13kg
Width: 57

Cutsomers also bought

APV-35-24
Technical Information & Details for the MEAN WELL APV-35-24 Power Supply Not approved for use as an LED driver within the EU! An approved alternative is, e.g., the LPF-25 series Output Power: 36 W Output Voltage: 24 V DC Output Current: 0 – 1.5 A Input Voltage Range: 90 – 264 V AC / 127 – 370 V DC, 47 – 63 Hz Efficiency: 84% Ripple & Noise: max. 150 mVp-p Inrush Current: Cold start 45 A (twidth = 440 µs measured at 50% Ipeak) at 230 V AC Protection Features: Short circuit, overload (110 – 160%), overvoltage (27 – 32.4 V) Protection Rating & Class: IP42, Class 2 power unit, LPS compliant Operating Temperature: −30 °C to +70 °C Isolation Voltage: 3 kV AC (input to output) Vibration Resistance: 10 – 500 Hz, 2G 10 min./1 cycle for 60 min. each along X, Y, Z axes Dimensions (L x W x H): 84 mm x 57 mm x 29.5 mm Weight: approx. 0.18 kg Safety & EMC Standards: UL8750, CSA-C22.2 No. 250.0-13, BIS IS15885, EAC TP TC 004, BS EN/EN 62368-1, CE Manufacturer Warranty: 2 years Information about the MEAN WELL APV-35-24 Cost-sensitive general electronics and illuminated display assemblies operating in semi-exposed environments require a dependable constant-voltage source housed within a protective enclosure. Providing a stable 24-volt output with a 36-watt capacity, the MEAN WELL APV-35-24 is built inside a fully isolated plastic chassis to handle routine installation challenges. Its universal AC input range accepts voltages from 90 to 264 V AC while successfully absorbing temporary 300 V AC surge peaks for up to five seconds. Physical integration is highly efficient thanks to ultra-compact dimensions measuring 84 by 57 by 29.5 millimeters. Environmental sealing meets IP42 standards alongside Class 2 power unit and Limited Power Source (LPS) approvals, permitting safe secondary-circuit deployment without requiring a physical ground wire. Thermal dispersion relies completely on natural free-air convection, eliminating fans to guarantee silent operation and higher long-term reliability. Operational safety features automatic hiccup-mode recovery for overloads between 110 and 160 percent, alongside comprehensive protection against short circuits and output overvoltage. Electrical isolation between input and output wiring is thoroughly tested at 3 kV AC, satisfying strict international safety mandates. Furthermore, the internal layout is reinforced to withstand significant mechanical vibrations up to 2G across three distinct axes during mobile or heavy-machinery operation. Supported by global compliance certifications including UL and CE marks, this power supply unit delivers reliable performance backed by a 2-year manufacturer warranty. Pre-stripped wire leads and lightweight construction simplify physical placement in tight control boxes or decorative enclosures. For installation only in devices whose primary use is other than lighting, e.g.,copiers, overhead and slide projectors, or for scale and display lighting.

from €8.90*
APV-16-24
Technische Eigenschaften des MEAN WELL APV-16-24 Leistung: 16,08 W Eingangsbereich: 90 bis 264 VAC  Sekundärspannung: 24 VDC Class II Schaltnetzteil Kompakte Bauweise Schutzart IP42 Konvektionsgekült Schutz vor Kurzschluss, Überspannung und Überlast Informationen zum MEAN WELL APV-16-24 Mit dem Modell APV-16-24 stellt Mean Well ein zuverlässiges 16,08 W LED-Schaltnetzteil für Niederspannungsanlagen wie z. B. dekorative LED-Beleuchtungen und LED-Anzeigenschilder dar. Eingangsseitig verfügt dieses Netzgerät von MeanWell über einen weiten AC-Spannungsbereich von 90 bis 264 V mit Derating bei 90 und 100 VAC. Ausgegeben wird ein Ausgangsstrom von 0,67 A sowie eine vielfältig einsetzbare Konstantspannung von 24 VDC. Die sämtliche Mean Well APV-16-Serie zeichnet sich vor allem durch ihre kompakte und geschlossene Bauform sowie die Schutzart IP42 im Kunststoffgehäuse aus. Damit können die Class II Schaltnetzteile von MeanWell sorgenfrei in verschiedensten Innenbereiche installiert werden. Die konvektionsgekühlte Produktreihe sorgt weiterhin für eine geräuscharmen Stromversorgung und kann einen Wirkungsgrad von bis zu 83% erreichen. Nicht zuletzt sind die APV-16-Modelle von Mean Well ausgangsseitig kurzschlussfest und gegen Überlast sowie Überspannung geschützt. Die LED-Schaltnetzteile erfüllen dabei alle grundlegenden Sicherheitsanforderungen gemäß UL8750, EN61000-3-2, EN55035 sowie weitere Standards. Mit hoher Zuverlässigkeit sowie herausragender Kosteneffizienz ist die MeanWell APV-16-Serie die optimale Lösung für LED-Beleuchtungen mit Niederspannungen.

from €5.00*
PLC-60-24
60W LED Schaltnetzteile 60W  Single Output LED Power Supply 

from €30.83*
LPV-100-24
Technical Information & Details about the MEAN WELL LPV-100-24 Power Supply Rated output power: 100.8 W DC output voltage: 24 V DC Rated output current: 4.2 A Current range: 0 – 4.2 A Input voltage range: 90 – 264 V AC (127 – 370 V DC), 47 – 63 Hz Efficiency (typical): about 88 % Ripple & noise (max.): ≤ 150 mVp-p Output voltage range (O.V.P. region): 27.6 – 32.4 V DC Voltage tolerance: ±5.0 % Line regulation: ±2.0 % Load regulation: ±5.0 % Setup, rise time: 2000 ms, 25 ms at 230 V AC / 115 V AC (first cold start) Hold-up time (typ.): 50 ms at 230 V AC / 14 ms at 115 V AC (full load) AC input current (typ.): 2.2 A at 115 V AC / 1.2 A at 230 V AC Inrush current (typ.): 75 A at 230 V AC (cold start, twidth ≈ 700 μs) Leakage current: < 0.25 mA at 240 V AC Overload protection: 110 – 150 % of rated output power, hiccup mode, auto recovery after fault removal Overvoltage protection: shut down output voltage at 27.6 – 32.4 V, re‑power on to recover Operating temperature: −25 °C to +70 °C (derating required, see curve) Operating humidity: 20 – 90 % RH, non‑condensing Storage conditions: −40 °C to +80 °C, 10 – 95 % RH Cooling method: free air convection (fanless) Withstand voltage: 3000 V AC between input and output Isolation resistance: > 100 MΩ at 500 V DC, 25 °C, 70 % RH Ingress protection rating: IP67, fully encapsulated plastic case Dimensions (L x W x H): 190 mm x 52 mm x 37 mm Weight: approx. 610 g Vibration resistance: 10 – 500 Hz, 2 G, 60 min per axis (X, Y, Z) EMC emission: BS EN/EN 55032 Class B, BS EN/EN 61000‑3‑2 Class A (≤80 % load), BS EN/EN 61000‑3‑3 EMC immunity: BS EN/EN 61000‑4‑2,‑3,‑4,‑5,‑6,‑8,‑11; BS EN/EN 55035 Safety approvals: UL 8750, CSA C22.2 No. 250.13‑12, UL 879, CSA C22.2 No. 207‑M89, BIS IS 15885, IEC/BS EN/EN 62368‑1, EAC Case design: fully isolated, encapsulated plastic case for damp and dusty environments MTBF (typical): 4,497,100 h (Telcordia SR‑332, 25 °C) Manufacturer warranty: 2 years About the MEAN WELL LPV-100-24 The MEAN WELL LPV-100-24 is a 100 W class constant‑voltage switching power supply that provides a regulated 24 V DC output at up to 4.2 A, fully encapsulated in an IP67 plastic housing for reliable use in harsh environments. Its universal AC input range, high efficiency, short‑circuit, overload and overvoltage protection, and fanless free air convection make it suitable for indoor and sheltered outdoor applications. With compact dimensions, strong isolation and broad safety and EMC approvals, LPV-100-24 is a robust 24 V source for LED strips, signage, control systems and other low‑voltage equipment that require a rugged, dust‑ and splash‑proof power supply.

from €18.70*
HLG-185H-24A
Technical Information & Details for the MEAN WELL HLG-185H-24A Power Supply Output Power: 187.2 W Output Voltage: 24 V DC Output Current: 7.8 A Input Voltage Range: 90 – 305 V AC / 127 – 431 V DC, 47 – 63 Hz Efficiency: 94% Ripple & Noise: ≤ 150 mVp-p Voltage Adjustment Range: 22 – 27 V (via internal potentiometer) Current Adjustment Range: 3.9 – 7.8 A (via internal potentiometer) Power Factor (PF): ≥ 0.98 / 115 VAC, ≥ 0.95 / 230 VAC Operating Temperature: −40 °C to +90 °C (Case Temperature) Cooling: Fanless, free air convection Protection Functions: Short circuit, Over current, Over voltage, Over temperature Ingress Protection: IP65 (Dust-tight and protected against water jets) Isolation Voltage: 3750 V AC between Input and Output Dimensions (L x W x H): 228 mm x 68 mm x 38.8 mm Weight: approx. 1150 g Safety & EMC Certificates: UL8750, EN61347-1, EN61347-2-13, IP65, EAC, CE Manufacturer Warranty: 7 Years Information about the MEAN WELL HLG-185H-24A The MEAN WELL HLG-185H-24A is a high-performance 187.2W AC/DC LED driver designed to meet the rigorous demands of industrial lighting systems. A key characteristic of the "A-Type" model is its internal potentiometers, which allow for manual adjustment of the output voltage (22–27V) and output current (3.9–7.8A). This feature provides essential on-site flexibility, enabling users to fine-tune power levels to match the exact requirements of their LED arrays. Utilizing a dual-mode constant voltage and constant current architecture, it ensures stable performance across a wide range of applications. The heavy-duty metal enclosure carries an IP65 rating, providing superior protection against dust and water jets, making it the perfect choice for LED street lighting, parking area illumination, and industrial high-bay fixtures. Boasting a peak efficiency of 94%, the driver operates reliably via free air convection without the need for active cooling fans. With a typical life expectancy of over 62,000 hours and a generous 7-year manufacturer warranty, the HLG-185H-24A stands as a top-tier, maintenance-free solution for professional-grade installations.

from €45.40*
APV-12-24
Technische Eigenschaften des MEAN WELL APV-12-24 Nennleistung: 12 W Eingangsbereich: 90 bis 264VAC  Ausgangsspannung: 24 VDC Class II Netzteil Schutzart IP42 Kühlung durch freie Luftkonvektion Schutz vor Kurzschluss, Überspannung und Überlast Informationen zum MEAN WELL APV-12-24 Beim Mean Well APV-12-24 handelt es sich um ein zuverlässiges LED-Netzgerät mit einer kompakten Bauform. Eingangsseitig kann es mit einem weiten AC-Spannungsbereich zwischen 90 und 264 V (Derating bei 90 – 100 VAC) gespeist werden. Zudem liefert das Schaltnetzteil von MeanWell eine geregelte 12 W Leistung bei einem 2 A Strom sowie bei einer vielfältig einsetzbaren Ausgangsspannung von 24 VDC.  Als zertifizierte Class II Netzteile mit der Schutzart IP42 im Kunststoffgehäuse können die APV-12-Modelle von Mean Well in verschiedensten Innenbereichen installiert werden. Daher sind die LED-Netzteile für umfassende LED-Anwendungen wie z. B. dekorative LED-Beleuchtungen sowie LED-Anzeigenschilder besonders gut geeignet. Mit dem lüfterlosen Design lässt sich die Produktreihe von MeanWell durch freie Luftkonvektion kühlen. Dies sorgt nicht nur für einen geräuscharmen Betrieb bei Temperaturen von -30 bis +70°C, sondern gewährleistet auch eine gute Arbeitseffizienz mit einem Wirkungsgrad von bis zu 85%. Nicht zuletzt bietet die APV-12-Serie von Mean Well einen Schutz gegen Kurzschluss, Überlast sowie Überspannung. Die LED-Schaltnetzteile erfüllen dabei alle regulatorischen Sicherheits- und Störfestigkeitsstandards gemäß UL8750, EN61000-3-2, EN55035 sowie weitere Anforderungen. Ausgezeichnet durch die hohe Zuverlässigkeit sowie die herausragende Kosteneffizienz ist die MeanWell APV-12-Serie die optimale Lösung für LED-Beleuchtungen mit Niederspannungen.

from €4.80*