Technical Information & Details of the MEAN WELL PWM-60-24DA2 LED Driver Output Power: 60 W Output Voltage: 24 V DC Output Current: 2.5 A Dimming Range: 0 – 100 % (PWM dimming, DALI‑2 control) PWM Output Frequency: approx. 2.5 kHz (DA2 type, fixed) Dimming Interface: DALI‑2 primary‑side interface (DA+ / DA−, no polarity), 16 groups, 64 addresses, first step fixed at 0.2 % of output Input Voltage Range: 90 – 305 V AC / 127 – 431 V DC Input Frequency: 47 – 63 Hz Power Factor (typ.): > 0.97 @115 VAC, > 0.95 @230 VAC, > 0.92 @277 VAC (full load) Efficiency (typ.): approx. 89 % AC Input Current (typ.): 0.8 A @115 VAC / 0.4 A @230 VAC / 0.32 A @277 VAC Inrush Current (typ.): 50 A @230 VAC (cold start, twidth ≈270 μs, per NEMA 410) THD: < 20 % (≥60 % load @115 / 230 VAC; ≥75 % load @277 VAC) No‑load Power Consumption: < 0.5 W Overload Protection: 108 – 130 % of rated power, hiccup mode (DA2 type), auto recovery (see static characteristic) Overvoltage Protection: shut down output, re‑power on to recover (typ. 28 – 34 V DC) Overtemperature Protection: shut down output, re‑power on to recover (DA2 type in hiccup‑like behaviour) Short‑circuit Protection: hiccup mode, auto recovery Operating Temperature (case): −40 °C to +85 °C (derating according to “Output load vs. temperature” curve) Operating Humidity: 20 – 95 % RH, non‑condensing Storage Temperature / Humidity: −40 °C to +80 °C, 10 – 95 % RH Temperature Coefficient: ±0.03 % / °C (0 – 50 °C) Vibration Resistance: 10 – 500 Hz, 5 G, 12 min./cycle, 72 min. along each X, Y, Z axis Dielectric Strength: 3.75 kVAC (input–output), 1.5 kVAC (input–DA), 1.5 kVAC (output–DA) Isolation Resistance: > 100 MΩ @500 VDC, 25 °C, 70 % RH Safety Standards: UL8750 (type “HL”, except DA type), UL879 (12/24 V Blank), ENEC EN 61347‑1, EN 61347‑2‑13 (independent), EN 62384, BIS IS 15885 (12/24/48 V Blank & 12/24‑DA2), EAC, GB19510.1 / GB19510.14; design reference EN 60335‑1; suitable for emergency lighting (EL) according to EN 61347‑2‑13 Annex J DALI Standards (DA2): IEC 62386‑101, 102, 207, 251, device type DT6 (for DA/DA2 types only) EMC Emission: EN 55015, EN 61000‑3‑2 Class C (≥60 % load), EN 61000‑3‑3, GB/T 17743, GB17625.1, EAC TP TC 020 EMC Immunity: EN 61000‑4‑2,3,4,5,6,8,11; EN 61547 (light industry level, 2 kV Line‑Line surge), EAC TP TC 020 MTBF (typ.): 2,626,600 h (Telcordia SR‑332, 25 °C) / 227,100 h (MIL‑HDBK‑217F, 25 °C) Dimensions (L x W x H): 150 mm x 53 mm x 35 mm Weight: approx. 0.49 kg Case & Protection: fully encapsulated plastic housing, IP67, Class II, Class 2, LPS Cooling Method: fanless, free air convection Information about the MEAN WELL PWM-60-24DA2 The MEAN WELL PWM‑60‑24DA2 is a 60 W constant‑voltage LED driver with 24 V DC output and high‑frequency 2.5 kHz PWM dimming, designed for DALI‑2‑controlled 24 V LED strip and module installations. The constant‑voltage PWM output ensures very uniform brightness and colour across the entire strip, which is especially beneficial for longer runs of 24 V linear lighting in visually demanding projects. Its technical strengths include a typical efficiency of around 89 %, a wide 90–305 V AC input range with active power factor correction and a fully potted IP67 housing suitable for dry, damp and wet locations. The broad case temperature range from −40 °C to +85 °C and the integrated protections against short circuit, overload, overvoltage and overtemperature allow the PWM‑60‑24DA2 to operate reliably in challenging architectural, commercial and industrial environments. A key unique characteristic of the PWM‑60‑24DA2 is the native DALI‑2 interface (DT6) on the primary side, providing addressable, group‑capable dimming and seamless integration into modern building and lighting management systems, while still delivering a pure PWM constant‑voltage output to the LEDs. Combined with its long MTBF and comprehensive safety and EMC approvals, this driver is an excellent choice for 24 V LED coves, linear accent lighting, signage and other DALI‑2‑based projects where stable low‑flicker dimming and central control are required.

Technical Information & Details on MEAN WELL PWM-120-24DA2 Power Supply Output Power: 120 W Output Voltage: 24 V DC Output Current: 5 A Input Voltage Range: 100 – 240 V AC, 47 – 63 Hz Efficiency: up to 90 % PWM Frequency: 2.5 kHz Inrush Current: typ. 60 A Standby Power Consumption: < 0.5 W Operating Temperature: −40 °C to +80 °C Cooling: IP67 waterproof, natural convection Protection Functions: Short circuit (Hiccup, auto recovery), Overload, Overvoltage, Over temperature Isolation Voltage: 3.75 kV AC between input and output Dimensions (L x W x H): 191.6 mm x 63 mm x 37.5 mm Weight: approx. 0.97 kg Safety & EMC Certifications: UL8750, ENEC BS EN 61347-1/-2-13, BIS IS 15885, EAC, IP67 Dimming: DALI-2 (IEC62386-101/102/207/251, Device Type 6) Manufacturer Warranty: 5 years Information on MEAN WELL PWM-120-24DA2 The MEAN WELL PWM-120-24DA2 is a powerful 120W PWM LED driver with cutting-edge DALI-2 certification in an ultra-rugged IP67 waterproof housing, handling a wide temperature range of -40 °C to +80 °C for harsh outdoor and industrial conditions. It excels with outstanding efficiency up to 90%, ultra-low standby consumption under 0.5 W, and precise DALI-2 dimming control (16 groups, 64 addresses, synchronizable). Perfect for commercial lighting, LED projects, and emergency systems with fast fault recovery and extended lifespan over 2,240,000 hours.

Technical Information & Details on MEAN WELL PWM-200-24DA2 Power Supply Output Power: 200 W Output Voltage: 24 V DC Output Current: 8.3 A Input Voltage Range: 100 – 305 V AC / 142 – 431 V DC, 47 – 63 Hz Efficiency: up to 93 % PWM Frequency: 2.5 kHz Inrush Current: typ. 65 A Standby Power Consumption: 0.5 W Operating Temperature: −40 °C to +80 °C Cooling: IP67 waterproof, natural convection Protection Functions: Short circuit (Hiccup, auto recovery), Overload, Overvoltage, Over temperature Isolation Voltage: 3.75 kV AC between input and output Dimensions (L x W x H): 195 mm x 68 mm x 39.5 mm Weight: approx. 1.03 kg Safety & EMC Certifications: UL8750, ENEC BS EN 61347-1/-2-13, IP67, EAC, IS 15885 Dimming: DALI-2 (IEC62386-101/102/207/251, Device Type 6) Manufacturer Warranty: 5 years Information on MEAN WELL PWM-200-24DA2 The MEAN WELL PWM-200-24DA2 is a reliable 200W PWM LED driver with DALI-2 standard and IP67 protection, confidently managing temperatures from -40 °C to +80 °C. Offering efficiency up to 93%, ultra-low 0.5 W standby, and professional DALI control (16 groups, 64 addresses). Ideal for networked LED solutions in commercial and architectural settings, automatic recovery, and lifespan over 2,235,000 hours.

Technical Information & Details for MEAN WELL HLG-150H-24A Power Supply Output Power: 151.2 W Output Voltage: 24 V DC Output Current: 6.3 A Input Voltage Range: 90 – 305 V AC / 127 – 431 V DC, 47 – 63 Hz Efficiency: 94% Ripple & Noise: ≤ 200 mVp-p Inrush Current: max. 65 A (Cold Start) @ 230 V AC No-load Power Consumption: < 0.5 W (model dependent) Operating Temperature: −40 °C to +90 °C (Case Temperature) Cooling: Fanless, free air convection Protection Functions: Short circuit, Overload, Over voltage, Over temperature Overvoltage Category: OVC III compliant Isolation Voltage: 3750 V AC between Input and Output Dimensions (L x W x H): 228 mm x 68 mm x 38.8 mm Weight: approx. 1150 g Safety & EMC Certificates: UL8750, EN61347-1, EN61347-2-13, IP65, CE Adjustability: Output voltage and current level adjustable via internal potentiometers Manufacturer Warranty: 7 Years About the MEAN WELL HLG-150H-24A The MEAN WELL HLG-150H-24A stands as a premium, high-performance solution within the LED driver market, engineered for maximum durability and peak efficiency. This 150W powerhouse features a dual-mode output, providing both Constant Voltage and Constant Current capabilities, which ensures compatibility with a vast array of high-end LED lighting architectures. The "A" type designation highlights its user-adjustable design, allowing for precise onsite calibration of the output voltage (22–27V) and current (3.8–6.3A) via built-in potentiometers to meet specific project requirements. Encased in a rugged aluminum housing with an IP65 rating, it is fully protected against dust and water splashes, making it an ideal choice for harsh industrial environments and outdoor street lighting. With an industry-leading efficiency rate of 94% and a fanless thermal design, it operates silently while maintaining a typical lifetime of over 62,000 hours. This commitment to quality is backed by a comprehensive 7-year manufacturer warranty, providing long-term reliability for critical infrastructure and commercial installations.

Technical Information & Details for the Snappy SE15-24VF LED Driver Output Power: 15 W Output Voltage: 24 V DC Output Current: 0 – 0.625 A Input Voltage Range: 180 – 264 V AC, 47 – 63 Hz Efficiency: up to 85% Output Voltage Ripple: ≤ 4% (PK-PK) Inrush Current: max. 60 A @ 230 VAC (Cold Start) Standby Power Consumption: < 0.5 W (Typical 0.2 W) Operating Temperature: −20 °C to +45 °C Cooling: Natural cooling (fanless) Protection Functions: Short circuit, Overload, Over-voltage Power Factor: 0.80 (at 230 VAC full load) Isolation Voltage: 3200 V AC between Input and Output Dimensions (L x W x H): 103 mm x 35.5 mm x 16 mm Weight: ca. 50 g Safety & EMC Certificates: CE, TUV, UL/CUL, SAA, CCC Lifetime: 30,000 hours (@ Tc 75 °C) Manufacturer Warranty: 3 years Information about the Snappy SE15-24VF The Snappy SE15-24VF is a specialized indoor super slim constant voltage LED driver designed for environments where space is at a premium. With an incredibly low profile height of just 16 mm, this 15W power supply is the perfect solution for integration into bathroom mirror lamps, furniture lighting, and decorative fixtures that require a discreet form factor. Despite its compact size, it boasts a maximum conversion efficiency of 85% and features a high power factor with low total harmonic distortion, ensuring it meets the stringent EN61000-3-2 harmonic standards for modern electrical efficiency. Reliability is a core strength of the SE15-24VF, which includes an all-round protection suite covering short circuits, overloads, and over-voltage scenarios with an auto-recovery "hiccup mode" once faults are cleared. It is engineered for longevity, offering a 30,000-hour lifetime at maximum case temperature and a low standby power consumption that supports eco-friendly design goals. This driver is compliant with worldwide safety regulations, including SELV and MM markings, making it a safe and dependable choice for high-quality residential and commercial 24V LED installations.

Technische Eigenschaften des MEAN WELL ELG-150-48DA-3Y Leistung: 150,2W Aluminiumgehäuse Integriertes PFC Standby Ladeverbrauch <0,5W IP67 DALI Mit PE (Varianten ohne 3Y: PE am Gehäuse!) Allgemeine Lebensdauer >50.000Std. 5 Jahre Garantie Produktbeschreibung zur MEAN WELL ELG-150 Serie Bei der MEAN WELL ELG-150 Serie handelt es sich um 150W AC/DC LED Netzteile, die im dualen Modus einen Konstantstrom- und Konstantspannungsausgang unterstützen. Die ELG-150 Netzteile arbeiten mit einem 180~295VAC Eingangsbereich und bieten verschiedene Ausgangsspannungen im Bereich von 12V bis 54V an. Dank des 91% hohem Wirkungsgrads und dem lüfterlosen Design kann die Serie unter freier Luftkonvektion im Temperaturbereich von -40°C bis +90°C betrieben werden. Durch das verwendete Aluminiumgehäuse und den Schutzklassen IP65/67 finden MEAN WELL ELG-150 Netzteile Anwendung sowohl Indoor-, als auch im Outdoorbereich. Die Serie verfügt weiterhin über verschiedene zusätzliche Funktionen, wie 3 in 1 Dimmung, Smart-Timer-Dimmung oder DALI, welche eine hohe Flexibilität in LED Beleuchtungsanwendungen garantieren.