PWM-90-12DA2

Technical Information & Details on MEAN WELL PWM-120-12DA2 Power Supply Output Power: 120 W Output Voltage: 12 V DC Output Current: 10 A Input Voltage Range: 100 – 240 V AC, 47 – 63 Hz Efficiency: up to 88.5 % PWM Frequency: 2.5 kHz Inrush Current: typ. 60 A Standby Power Consumption: < 0.5 W Operating Temperature: −40 °C to +80 °C Cooling: IP67 waterproof, natural convection Protection Functions: Short circuit (Hiccup, auto recovery), Overload, Overvoltage, Over temperature Isolation Voltage: 3.75 kV AC between input and output Dimensions (L x W x H): 191.6 mm x 63 mm x 37.5 mm Weight: approx. 0.97 kg Safety & EMC Certifications: UL8750, ENEC BS EN 61347-1/-2-13, BIS IS 15885, EAC, IP67 Dimming: DALI-2 (IEC62386-101/102/207/251, Device Type 6) Manufacturer Warranty: 5 years Information on MEAN WELL PWM-120-12DA2 The MEAN WELL PWM-120-12DA2 is a highly reliable 120W PWM LED driver with advanced DALI-2 certification in a rugged IP67 waterproof housing, mastering an extreme temperature range of -40 °C to +80 °C for demanding outdoor and industrial applications. It shines with high efficiency up to 88.5%, low standby consumption under 0.5 W, and precise DALI-2 control (16 groups, 64 addresses, synchronizable). Ideal for emergency lighting, LED strips, and commercial installations with automatic fault recovery and lifespan over 2,240,000 hours.

Technical Information & Details of the MEAN WELL PWM-60-12DA2 LED Driver Output Power: 60 W Output Voltage: 12 V DC Output Current: 5 A Dimming Range: 0 – 100 % (PWM dimming, DALI‑2 control) PWM Output Frequency: approx. 2.5 kHz (DA2 type, fixed) Dimming Interface: DALI‑2 primary‑side interface (DA+/DA‑, no polarity), 16 groups and 64 addresses, first step fixed at 0.2 % output Input Voltage Range: 90 – 305 V AC / 127 – 431 V DC Input Frequency: 47 – 63 Hz Power Factor (typ.): > 0.97 @115 VAC, > 0.95 @230 VAC, > 0.92 @277 VAC (full load) Efficiency (typ.): approx. 86 % AC Input Current (typ.): 0.8 A @115 VAC / 0.4 A @230 VAC / 0.32 A @277 VAC Inrush Current (typ.): 50 A @230 VAC (cold start, twidth ≈270 μs, per NEMA 410) THD: < 20 % (≥60 % load @115 / 230 VAC; ≥75 % load @277 VAC) No‑load Power Consumption: < 0.5 W Overload Protection: 108 – 130 % of rated power; DA2 type: hiccup mode, auto recovery (see static characteristic) Overvoltage Protection: shut down output, re‑power on to recover (typ. 15 – 17 V DC) Overtemperature Protection: shut down output, re‑power on to recover (DA2 type in hiccup‑like behaviour) Short‑circuit Protection: hiccup mode, auto recovery Operating Temperature (case): −40 °C to +85 °C (derating according to “Output load vs. temperature” curve) Operating Humidity: 20 – 95 % RH, non‑condensing Storage Temperature / Humidity: −40 °C to +80 °C, 10 – 95 % RH Temperature Coefficient: ±0.03 % / °C (0 – 50 °C) Vibration Resistance: 10 – 500 Hz, 5 G, 12 min./cycle, 72 min. along each X, Y, Z axis Dielectric Strength: 3.75 kVAC (input–output), 1.5 kVAC (input–DA), 1.5 kVAC (output–DA) Isolation Resistance: > 100 MΩ @500 VDC, 25 °C, 70 % RH Safety Standards: UL8750 (type “HL”, except DA type), UL879 (12/24 V Blank), ENEC EN 61347‑1, EN 61347‑2‑13 (independent), EN 62384, BIS IS 15885 (12/24/48 V Blank & 12/24‑DA2), EAC, GB19510.1 / GB19510.14; design reference EN 60335‑1; suitable for emergency lighting (EL) according to EN 61347‑2‑13 Annex J DALI Standards (DA2): IEC 62386‑101, 102, 207, 251, device type DT6 (for DA/DA2 types only) EMC Emission: EN 55015, EN 61000‑3‑2 Class C (≥60 % load), EN 61000‑3‑3, GB/T 17743, GB17625.1, EAC TP TC 020 EMC Immunity: EN 61000‑4‑2,3,4,5,6,8,11; EN 61547 (light industry level, 2 kV Line‑Line surge), EAC TP TC 020 MTBF (typ.): 2,626,600 h (Telcordia SR‑332, 25 °C) / 227,100 h (MIL‑HDBK‑217F, 25 °C) Dimensions (L x W x H): 150 mm x 53 mm x 35 mm Weight: approx. 0.49 kg Case & Protection: fully encapsulated plastic housing, IP67, Class II, Class 2, LPS Cooling Method: fanless, free air convection Information about the MEAN WELL PWM-60-12DA2 The MEAN WELL PWM‑60‑12DA2 is a 60 W constant‑voltage LED driver with a 12 V DC output and high‑frequency 2.5 kHz PWM dimming, engineered for DALI‑2 controlled 12 V LED strip and low‑voltage lighting systems. The constant‑voltage PWM output allows connected LED strips to retain consistent brightness and colour quality across the entire dimming range, while the higher PWM frequency of the DA2 version helps to minimise visible flicker in sensitive applications. Its strengths include a robust electrical design with active power factor correction, a wide 90–305 V AC input range and a fully potted IP67 enclosure that supports use in dry, damp and wet environments. The wide case temperature range from −40 °C to +85 °C, together with overload, overvoltage, overtemperature and short‑circuit protection in hiccup or shutdown modes, makes the PWM‑60‑12DA2 suitable for long‑life installations in commercial, architectural and industrial lighting. A key unique characteristic of the PWM‑60‑12DA2 is its native DALI‑2 interface (DT6), which enables addressable, groupable and scene‑based dimming in modern building and lighting management systems, while still providing a pure PWM output towards the LEDs. Combined with its long MTBF and comprehensive safety and EMC approvals, this model is a strong fit for centralised 12 V LED strip lighting, cove and accent lighting and control‑intensive projects where DALI‑2 compliance and high‑quality dimming behaviour are essential.

Technische Eigenschaften des MEAN WELL ELG-150-12DA-3Y Leistung: 120W Aluminiumgehäuse Integriertes PFC Standby Ladeverbrauch <0,5W IP67 DALI Mit PE (Varianten ohne 3Y: PE am Gehäuse!) Allgemeine Lebensdauer >50.000Std. 5 Jahre Garantie Produktbeschreibung zur MEAN WELL ELG-150 Serie Bei der MEAN WELL ELG-150 Serie handelt es sich um 150W AC/DC LED Netzteile, die im dualen Modus einen Konstantstrom- und Konstantspannungsausgang unterstützen. Die ELG-150 Netzteile arbeiten mit einem 180~295VAC Eingangsbereich und bieten verschiedene Ausgangsspannungen im Bereich von 12V bis 54V an. Dank des 91% hohem Wirkungsgrads und dem lüfterlosen Design kann die Serie unter freier Luftkonvektion im Temperaturbereich von -40°C bis +90°C betrieben werden. Durch das verwendete Aluminiumgehäuse und den Schutzklassen IP65/67 finden MEAN WELL ELG-150 Netzteile Anwendung sowohl Indoor-, als auch im Outdoorbereich. Die Serie verfügt weiterhin über verschiedene zusätzliche Funktionen, wie 3 in 1 Dimmung, Smart-Timer-Dimmung oder DALI, welche eine hohe Flexibilität in LED Beleuchtungsanwendungen garantieren.

Technical Specifications & Details for MEAN WELL ELG-75-12DA-3Y Power Supply Output Power: 60 W Output Voltage: 12 V DC (6–12 V) Output Current: 5 A Input Voltage Range: 100–305 V AC / 142–431 V DC, 47–63 Hz Efficiency: up to 85 % Ripple & Noise: ≤ 150 mVp-p Inrush Current: max. 50 A No-Load Power Consumption: < 0.5 W Operating Temperature: −40 °C to +85 °C (Case) Cooling: free air convection Protections: Short circuit (Hiccup), Overload, Overvoltage, Over temperature Overvoltage Category: OVC II Isolation Voltage: 3.75 kV AC IP-OP Dimensions (L x W x H): 180 mm x 63 mm x 35.5 mm Weight: ca. 800 g Safety & EMC Certificates: UL8750, IEC/EN 61347-1/-2-13, IP67, CE, DALI Manufacturer Warranty: 5 Years Information on MEAN WELL ELG-75-12DA-3Y The MEAN WELL ELG-75-12DA-3Y is a professional DALI LED driver power supply featuring innovative DALI interface (IEC62386-101,102,207), engineered for smart lighting control in modern buildings and industrial applications. It delivers precise 12 V DC output at 5 A in CV+CC mode with IP67 full encapsulation for extreme outdoor use and wide 100–305 V AC input range for global flexibility. The high-performance aluminum construction operates reliably across -40 °C to +85 °C case temperatures with efficiency up to 85 % and low ripple ≤150 mVp-p for absolutely flicker-free LED lighting. With integrated DALI protocol supporting 16 groups and 64 addresses, complete protection functions in Hiccup mode, and international certifications including UL8750 and IEC/EN 61347, the ELG-75-12DA-3Y delivers professional system integration for centralized lighting control. The compact 180 x 63 x 35.5 mm design with MTBF >345,000 hours, minimal no-load consumption <0.5 W, and extended 5-year warranty makes it the perfect solution for intelligent building lighting, street lamps, and industrial installations with future-proof DALI compatibility.

60~75W Konstantstrom LED Treiber 60~75W Constant Current Mode LED Driver

Technical Information & Details on MEAN WELL PWM-90-24DA2 LED Driver Output Power: 90 W Output Voltage: 24 V DC Output Current: 3.75 A Input Voltage Range: 100 – 240 V AC, 47 – 63 Hz Efficiency: up to 90.5 % PWM Frequency: 2.5 kHz (DA2) Inrush Current: typ. 60 A @ 230 VAC No-Load Power Consumption: < 0.5 W Operating Temperature: −40 °C to +85 °C (Tcase) Cooling: passive convection Protection Functions: Hiccup mode (auto recovery) IP Rating: IP67 Isolation Voltage: IP-O/P 3.75 kV AC, IP-DA 1.5 kV AC Dimensions (L x W x H): 171 mm x 63 mm x 37.5 mm Weight: ca. 770 g Safety & EMC Certifications: UL8750, ENEC EN61347, IP67, BIS IS 15885, EAC Dimming: DALI-2 (IEC62386-101/102/207/251), Device Type 6 MTBF: > 2,394,000 hours Manufacturer Warranty: 5 Years Information on MEAN WELL PWM-90-24DA2 The MEAN WELL PWM-90-24DA2 is the advanced DALI-2 certified 90W PWM output LED driver with 2.5 kHz PWM frequency in a rugged IP67 waterproof housing for professional lighting applications. It excels with outstanding efficiency up to 90.5%, extreme temperature range -40 °C to +85 °C, over 2,394,000 hours MTBF, and 5-year manufacturer warranty. The DALI-2 compatibility with 16 groups/64 addresses, improved setup time for DALI controllers, and full bidirectional communication make it ideal for modern smart lighting systems in facade lighting, street lamps, and industrial applications with maximum precision and reliability.