Technical Information & Details on MEAN WELL PWM-200-24DA2 Power Supply Output Power: 200 W Output Voltage: 24 V DC Output Current: 8.3 A Input Voltage Range: 100 – 305 V AC / 142 – 431 V DC, 47 – 63 Hz Efficiency: up to 93 % PWM Frequency: 2.5 kHz Inrush Current: typ. 65 A Standby Power Consumption: 0.5 W Operating Temperature: −40 °C to +80 °C Cooling: IP67 waterproof, natural convection Protection Functions: Short circuit (Hiccup, auto recovery), Overload, Overvoltage, Over temperature Isolation Voltage: 3.75 kV AC between input and output Dimensions (L x W x H): 195 mm x 68 mm x 39.5 mm Weight: approx. 1.03 kg Safety & EMC Certifications: UL8750, ENEC BS EN 61347-1/-2-13, IP67, EAC, IS 15885 Dimming: DALI-2 (IEC62386-101/102/207/251, Device Type 6) Manufacturer Warranty: 5 years Information on MEAN WELL PWM-200-24DA2 The MEAN WELL PWM-200-24DA2 is a reliable 200W PWM LED driver with DALI-2 standard and IP67 protection, confidently managing temperatures from -40 °C to +80 °C. Offering efficiency up to 93%, ultra-low 0.5 W standby, and professional DALI control (16 groups, 64 addresses). Ideal for networked LED solutions in commercial and architectural settings, automatic recovery, and lifespan over 2,235,000 hours.

Technical Information & Details on MEAN WELL PWM-120-24DA Power Supply Output Power: 120 W Output Voltage: 24 V DC Output Current: 5 A Input Voltage Range: 90 – 305 V AC / 127 – 431 V DC, 47 – 63 Hz Efficiency: up to 90 % PWM Frequency: 1.47 kHz Inrush Current: typ. 60 A / 50 µs @ 230 VAC No-Load Power Consumption: < 0.5 W (Standby < 0.5 W) Operating Temperature: −40 °C to +80 °C Cooling: natural convection Protection Functions: Short circuit (Hiccup mode), Overload, Overvoltage, Over temperature Overvoltage Category: II Isolation Voltage: 3.75 kV AC between input and output; IP-DA 1.5 kV AC Dimensions (L x W x H): 191 mm x 63 mm x 37.5 mm Weight: approx. 0.97 kg Safety & EMC Certifications: UL8750, ENEC EN61347-1/-2-13, EAC, CB, IP67, BIS IS 15885, DALI Standards IEC62386-101/102/207/251 (DT6) Dimming: DALI (up to 16 groups / 64 addresses) MTBF: > 2243.7k hours (Telcordia SR-332) Manufacturer Warranty: 5 years Information on MEAN WELL PWM-120-24DA This PWM LED driver excels with its extremely wide operating range (−40 °C to +80 °C), IP67 waterproofing for outdoor use, and high efficiency up to 90 % with low no-load consumption. Unique features include DALI dimming (DT6) with synchronized multi-device control, automatic fault recovery, and superior vibration resistance for enduring performance in smart lighting systems. The MEAN WELL PWM-120-DA series is a high-performance 120 W PWM output LED driver power supply with waterproof IP67 housing and integrated DALI interface, designed for demanding outdoor and industrial applications. The PWM-120-24DA model delivers stable 24 V DC / 5 A output power with an extremely wide input voltage range of 90–305 V AC. It is ideal for DALI-controlled LED lighting, street lamps, industrial LEDs, and weather-exposed installations, backed by comprehensive certifications and a 5-year manufacturer warranty.

Discontinued Product see replacement LCM-60DA2

Discontinued Product see replacement: LCM-40DA2

Technical Information & Details of the MEAN WELL PWM-60-24DA2 LED Driver Output Power: 60 W Output Voltage: 24 V DC Output Current: 2.5 A Dimming Range: 0 – 100 % (PWM dimming, DALI‑2 control) PWM Output Frequency: approx. 2.5 kHz (DA2 type, fixed) Dimming Interface: DALI‑2 primary‑side interface (DA+ / DA−, no polarity), 16 groups, 64 addresses, first step fixed at 0.2 % of output Input Voltage Range: 90 – 305 V AC / 127 – 431 V DC Input Frequency: 47 – 63 Hz Power Factor (typ.): > 0.97 @115 VAC, > 0.95 @230 VAC, > 0.92 @277 VAC (full load) Efficiency (typ.): approx. 89 % AC Input Current (typ.): 0.8 A @115 VAC / 0.4 A @230 VAC / 0.32 A @277 VAC Inrush Current (typ.): 50 A @230 VAC (cold start, twidth ≈270 μs, per NEMA 410) THD: < 20 % (≥60 % load @115 / 230 VAC; ≥75 % load @277 VAC) No‑load Power Consumption: < 0.5 W Overload Protection: 108 – 130 % of rated power, hiccup mode (DA2 type), auto recovery (see static characteristic) Overvoltage Protection: shut down output, re‑power on to recover (typ. 28 – 34 V DC) Overtemperature Protection: shut down output, re‑power on to recover (DA2 type in hiccup‑like behaviour) Short‑circuit Protection: hiccup mode, auto recovery Operating Temperature (case): −40 °C to +85 °C (derating according to “Output load vs. temperature” curve) Operating Humidity: 20 – 95 % RH, non‑condensing Storage Temperature / Humidity: −40 °C to +80 °C, 10 – 95 % RH Temperature Coefficient: ±0.03 % / °C (0 – 50 °C) Vibration Resistance: 10 – 500 Hz, 5 G, 12 min./cycle, 72 min. along each X, Y, Z axis Dielectric Strength: 3.75 kVAC (input–output), 1.5 kVAC (input–DA), 1.5 kVAC (output–DA) Isolation Resistance: > 100 MΩ @500 VDC, 25 °C, 70 % RH Safety Standards: UL8750 (type “HL”, except DA type), UL879 (12/24 V Blank), ENEC EN 61347‑1, EN 61347‑2‑13 (independent), EN 62384, BIS IS 15885 (12/24/48 V Blank & 12/24‑DA2), EAC, GB19510.1 / GB19510.14; design reference EN 60335‑1; suitable for emergency lighting (EL) according to EN 61347‑2‑13 Annex J DALI Standards (DA2): IEC 62386‑101, 102, 207, 251, device type DT6 (for DA/DA2 types only) EMC Emission: EN 55015, EN 61000‑3‑2 Class C (≥60 % load), EN 61000‑3‑3, GB/T 17743, GB17625.1, EAC TP TC 020 EMC Immunity: EN 61000‑4‑2,3,4,5,6,8,11; EN 61547 (light industry level, 2 kV Line‑Line surge), EAC TP TC 020 MTBF (typ.): 2,626,600 h (Telcordia SR‑332, 25 °C) / 227,100 h (MIL‑HDBK‑217F, 25 °C) Dimensions (L x W x H): 150 mm x 53 mm x 35 mm Weight: approx. 0.49 kg Case & Protection: fully encapsulated plastic housing, IP67, Class II, Class 2, LPS Cooling Method: fanless, free air convection Information about the MEAN WELL PWM-60-24DA2 The MEAN WELL PWM‑60‑24DA2 is a 60 W constant‑voltage LED driver with 24 V DC output and high‑frequency 2.5 kHz PWM dimming, designed for DALI‑2‑controlled 24 V LED strip and module installations. The constant‑voltage PWM output ensures very uniform brightness and colour across the entire strip, which is especially beneficial for longer runs of 24 V linear lighting in visually demanding projects. Its technical strengths include a typical efficiency of around 89 %, a wide 90–305 V AC input range with active power factor correction and a fully potted IP67 housing suitable for dry, damp and wet locations. The broad case temperature range from −40 °C to +85 °C and the integrated protections against short circuit, overload, overvoltage and overtemperature allow the PWM‑60‑24DA2 to operate reliably in challenging architectural, commercial and industrial environments. A key unique characteristic of the PWM‑60‑24DA2 is the native DALI‑2 interface (DT6) on the primary side, providing addressable, group‑capable dimming and seamless integration into modern building and lighting management systems, while still delivering a pure PWM constant‑voltage output to the LEDs. Combined with its long MTBF and comprehensive safety and EMC approvals, this driver is an excellent choice for 24 V LED coves, linear accent lighting, signage and other DALI‑2‑based projects where stable low‑flicker dimming and central control are required.

Technical Information & Details for MEAN WELL HLG-80H-24A Power Supply Output Power: 81.6 W Output Voltage: 24 V DC Output Current: 3.4 A Input Voltage Range: 90 – 305 V AC / 127 – 431 V DC, 47 – 63 Hz Efficiency: 90.5 % Ripple & Noise: max. 150 mVp-p Inrush Current: 70 A at 230 V AC Operating Temperature: −40 °C to +80 °C (Case) Cooling: fanless free air convection Protection Functions: Short circuit, Over current, Over voltage, Over temperature Isolation Voltage: 3750 V AC (Input to Output) Dimensions (L x W x H): 195.6 mm x 61.5 mm x 38.8 mm Weight: approx. 840 g Safety & EMC Certificates: UL8750, EN61347-1, IP65, CE, EAC, KC Manufacturer Warranty: 7 Years Information about the MEAN WELL HLG-80H-24A The MEAN WELL HLG-80H-24A is a high-performance 81.6W AC/DC driver designed for superior reliability in professional lighting and industrial environments. A key feature of this A-Type model is its internal adjustability, allowing users to manually fine-tune the output voltage and current levels via built-in potentiometers. This ensures the power supply can be perfectly calibrated to specific load requirements. The unit operates with a dual-mode output, functioning effectively in both Constant Voltage and Constant Current regions. Housed in a fully encapsulated metal casing with an IP65 rating, the HLG-80H-24A is well-protected against dust and moisture, making it a dependable choice for outdoor signage, street lighting, and architectural installations. It features built-in active Power Factor Correction and a 90.5% efficiency rating, contributing to energy savings and minimal heat generation. With a typical life expectancy exceeding 62,000 hours and a comprehensive 7-year manufacturer warranty, this 24V model provides the long-term stability needed for mission-critical industrial automation and high-quality LED systems.