XLG-200-24-A

150W Konstantstrom LED Treiber 150W Constant Current LED Driver In: 100-305VAC 47-63Hz 142-431VDC / Eff. 91.5%/ 180x63x35mmOut: 24V 6.25A, 3.2-6.25A strom einstellbar , Arbeitet im CC und CV modus, IP67

In: 220-240VAC 47-63Hz / 162.5x42.5x32mmOut: 100W / 0~4.17A / 24VDC / Eff. 89% / IP67, PFC

Technical Information & Details for MEAN WELL LPV-150-24 Power Supply Output power: 151.2 W Output voltage: 24 V DC Rated output current: 6.3 A Output current range: 0 – 6.3 A Output characteristic: constant voltage mode Ripple & noise: max. 200 mVp-p Voltage tolerance: ± 1.0% Line regulation: ± 2.0% Load regulation: ± 5.0% Input voltage range: 180 – 305 V AC / 254 – 431 V DC, 47 – 63 Hz Efficiency (typical): 89% AC input current: 1.7 A @ 230 V AC / 1.5 A @ 277 V AC Inrush current (cold start): 60 A @ 230 V AC (twidth = 900 µs, 50% Ipeak) Leakage current: max. 0.25 mA @ 240 V AC Setup & rise time: 500 ms, 50 ms @ 230 V AC / 277 V AC Hold-up time (typical): 18 ms @ 230 V AC / 20 ms @ 277 V AC (full load) Overload protection: 110 – 150% of rated output power, hiccup mode, auto recovery Over-voltage protection: 27 – 35 V DC, shutdown with automatic recovery after fault removal Over-temperature protection: output shutdown, automatic restart after cooling down Operating temperature: −25 °C to +65 °C (power derating according to derating curve) Operating humidity: 20 – 90% RH, non-condensing Storage temperature & humidity: −40 °C to +80 °C, 10 – 95% RH Temperature coefficient: ± 0.03% / °C (0 – 50 °C) Cooling: fanless design, cooling by free air convection Case material: fully insulated, flame-retardant plastic housing (UL 94V-0) Ingress protection: IP67 Dielectric strength: 3,000 V AC (input to output) Insulation resistance: > 100 MΩ @ 500 V DC, 25 °C, 70% RH Vibration resistance: 10 – 500 Hz, 2 G, 10 min./cycle along each of the X, Y, Z axes MTBF: 3,361,200 h (Telcordia SR-332, 25 °C) Dimensions (L x W x H): 191 mm x 63 mm x 37.5 mm Weight: 0.79 kg Cable connections: primary SJTW 14 AWG, secondary SJTW 18 AWG, pre‑wired leads Recommended mounting: horizontal mounting, case type LPC-150 as per mechanical drawing Safety standards: UL 8750, CSA C22.2 No. 250.13-12, UL 879, CSA C22.2 No. 207-M89, IEC/EN 62368-1, BIS IS 15885 (for LPV-150-24), EAC EMC standards: EN 55032 (CISPR 32) Class B, EN 55035, EN 61000-3-2 Class A (≤ 80% load), EN 61000-3-3, EN 61000-4-2/3/4/5/6/8/11 Device class: Class II power unit, double insulated, no FG (earth) connection Application environment: suitable for indoor use or outdoor use without direct sunlight exposure Manufacturer warranty: 2 years Information about MEAN WELL LPV-150-24 The MEAN WELL LPV-150-24 is a 150 W constant voltage LED power supply that delivers a stable 24 V DC output at up to 6.3 A, making it an excellent choice for 24 V LED strips, signage, and architectural lighting systems. Its key strengths include a fully encapsulated IP67-rated housing for reliable operation in dry, damp, and wet locations, a fanless free‑air convection design for silent and low‑maintenance operation, and comprehensive protections against short-circuit, overload, over-voltage, and over-temperature with automatic recovery. With a wide 180–305 V AC input range, high efficiency around 89%, and long service life, the LPV-150-24 is ideally suited for professional 24 V LED installations that require dependable continuous operation in both indoor and protected outdoor environments.Only for installation in devices whose primary use is other than lighting, e.g. copiers, overhead and slide projectors, or for scale and display lighting.

60W AC Dimmbar LED Netzteile 60W Single Output AC Dimmable LED Power Supply

40W AC Dimmbar LED Netzteile 40W Single Output AC Dimmable LED Power Supply

Technical Information & Details on MEAN WELL PWM-120-24KN Power Supply Output Power: 120 W Output Voltage: 24 V DC Output Current: 5 A Input Voltage Range: 90 – 305 V AC / 127 – 431 V DC, 47 – 63 Hz Efficiency: up to 90 % PWM Frequency: 0 – 4000 Hz (adjustable via ETS) Inrush Current: typ. 60 A Standby Power Consumption: 0.5 W Operating Temperature: −40 °C to +80 °C Cooling: natural convection Protection Functions: Short circuit (Hiccup, auto recovery), Overload, Overvoltage, Over temperature Isolation Voltage: 3.75 kV AC between input and output Dimensions (L x W x H): 191 mm x 63 mm x 37.5 mm Weight: approx. 0.80 kg Safety & EMC Certifications: ENEC BS EN 61347-1/-2-13, BIS IS 15885, EAC Dimming: KNX certified Manufacturer Warranty: 5 years Information on MEAN WELL PWM-120-24KN The MEAN WELL PWM-120-24KN is an advanced 120W PWM LED driver with complete KNX certification for flawless smart building automation, including flexible PWM frequency adjustment up to 4000 Hz via ETS without power supply. It shines with wide operating temperature range -40 °C to +80 °C, superior efficiency up to 90%, and universal input voltage support. Perfect for KNX-compatible LED systems in offices and industry, fault-tolerant tech, and ultra-durable with over 1,900,000 hours lifespan.