ELG-200-48-3Y

Technical Information & Details on MEAN WELL PWM-200-24DA2 Power Supply Output Power: 200 W Output Voltage: 24 V DC Output Current: 8.3 A Input Voltage Range: 100 – 305 V AC / 142 – 431 V DC, 47 – 63 Hz Efficiency: up to 93 % PWM Frequency: 2.5 kHz Inrush Current: typ. 65 A Standby Power Consumption: 0.5 W Operating Temperature: −40 °C to +80 °C Cooling: IP67 waterproof, natural convection Protection Functions: Short circuit (Hiccup, auto recovery), Overload, Overvoltage, Over temperature Isolation Voltage: 3.75 kV AC between input and output Dimensions (L x W x H): 195 mm x 68 mm x 39.5 mm Weight: approx. 1.03 kg Safety & EMC Certifications: UL8750, ENEC BS EN 61347-1/-2-13, IP67, EAC, IS 15885 Dimming: DALI-2 (IEC62386-101/102/207/251, Device Type 6) Manufacturer Warranty: 5 years Information on MEAN WELL PWM-200-24DA2 The MEAN WELL PWM-200-24DA2 is a reliable 200W PWM LED driver with DALI-2 standard and IP67 protection, confidently managing temperatures from -40 °C to +80 °C. Offering efficiency up to 93%, ultra-low 0.5 W standby, and professional DALI control (16 groups, 64 addresses). Ideal for networked LED solutions in commercial and architectural settings, automatic recovery, and lifespan over 2,235,000 hours.

Technical Information & Details of the MEAN WELL PWM-60-24DA2 LED Driver Output Power: 60 W Output Voltage: 24 V DC Output Current: 2.5 A Dimming Range: 0 – 100 % (PWM dimming, DALI‑2 control) PWM Output Frequency: approx. 2.5 kHz (DA2 type, fixed) Dimming Interface: DALI‑2 primary‑side interface (DA+ / DA−, no polarity), 16 groups, 64 addresses, first step fixed at 0.2 % of output Input Voltage Range: 90 – 305 V AC / 127 – 431 V DC Input Frequency: 47 – 63 Hz Power Factor (typ.): > 0.97 @115 VAC, > 0.95 @230 VAC, > 0.92 @277 VAC (full load) Efficiency (typ.): approx. 89 % AC Input Current (typ.): 0.8 A @115 VAC / 0.4 A @230 VAC / 0.32 A @277 VAC Inrush Current (typ.): 50 A @230 VAC (cold start, twidth ≈270 μs, per NEMA 410) THD: < 20 % (≥60 % load @115 / 230 VAC; ≥75 % load @277 VAC) No‑load Power Consumption: < 0.5 W Overload Protection: 108 – 130 % of rated power, hiccup mode (DA2 type), auto recovery (see static characteristic) Overvoltage Protection: shut down output, re‑power on to recover (typ. 28 – 34 V DC) Overtemperature Protection: shut down output, re‑power on to recover (DA2 type in hiccup‑like behaviour) Short‑circuit Protection: hiccup mode, auto recovery Operating Temperature (case): −40 °C to +85 °C (derating according to “Output load vs. temperature” curve) Operating Humidity: 20 – 95 % RH, non‑condensing Storage Temperature / Humidity: −40 °C to +80 °C, 10 – 95 % RH Temperature Coefficient: ±0.03 % / °C (0 – 50 °C) Vibration Resistance: 10 – 500 Hz, 5 G, 12 min./cycle, 72 min. along each X, Y, Z axis Dielectric Strength: 3.75 kVAC (input–output), 1.5 kVAC (input–DA), 1.5 kVAC (output–DA) Isolation Resistance: > 100 MΩ @500 VDC, 25 °C, 70 % RH Safety Standards: UL8750 (type “HL”, except DA type), UL879 (12/24 V Blank), ENEC EN 61347‑1, EN 61347‑2‑13 (independent), EN 62384, BIS IS 15885 (12/24/48 V Blank & 12/24‑DA2), EAC, GB19510.1 / GB19510.14; design reference EN 60335‑1; suitable for emergency lighting (EL) according to EN 61347‑2‑13 Annex J DALI Standards (DA2): IEC 62386‑101, 102, 207, 251, device type DT6 (for DA/DA2 types only) EMC Emission: EN 55015, EN 61000‑3‑2 Class C (≥60 % load), EN 61000‑3‑3, GB/T 17743, GB17625.1, EAC TP TC 020 EMC Immunity: EN 61000‑4‑2,3,4,5,6,8,11; EN 61547 (light industry level, 2 kV Line‑Line surge), EAC TP TC 020 MTBF (typ.): 2,626,600 h (Telcordia SR‑332, 25 °C) / 227,100 h (MIL‑HDBK‑217F, 25 °C) Dimensions (L x W x H): 150 mm x 53 mm x 35 mm Weight: approx. 0.49 kg Case & Protection: fully encapsulated plastic housing, IP67, Class II, Class 2, LPS Cooling Method: fanless, free air convection Information about the MEAN WELL PWM-60-24DA2 The MEAN WELL PWM‑60‑24DA2 is a 60 W constant‑voltage LED driver with 24 V DC output and high‑frequency 2.5 kHz PWM dimming, designed for DALI‑2‑controlled 24 V LED strip and module installations. The constant‑voltage PWM output ensures very uniform brightness and colour across the entire strip, which is especially beneficial for longer runs of 24 V linear lighting in visually demanding projects. Its technical strengths include a typical efficiency of around 89 %, a wide 90–305 V AC input range with active power factor correction and a fully potted IP67 housing suitable for dry, damp and wet locations. The broad case temperature range from −40 °C to +85 °C and the integrated protections against short circuit, overload, overvoltage and overtemperature allow the PWM‑60‑24DA2 to operate reliably in challenging architectural, commercial and industrial environments. A key unique characteristic of the PWM‑60‑24DA2 is the native DALI‑2 interface (DT6) on the primary side, providing addressable, group‑capable dimming and seamless integration into modern building and lighting management systems, while still delivering a pure PWM constant‑voltage output to the LEDs. Combined with its long MTBF and comprehensive safety and EMC approvals, this driver is an excellent choice for 24 V LED coves, linear accent lighting, signage and other DALI‑2‑based projects where stable low‑flicker dimming and central control are required.

In: 220-240VAC 50/60Hz / 0,17A / Eff.: 88%Out: 24VDC / 30W / 0,625A / 154x50x14

Technical Information & Details for the SNAPPY SS60-48VF Power Supply Output Power: 60 W Output Voltage: 48 V DC Output Current: 0 – 1.25 A Input Voltage Range: 220 – 240 V AC (Operative 198 – 264 V AC) Efficiency: 89 % Ripple & Noise: ± 3 % Inrush Current: max. 30 A @ 230 VAC (Cold start) Stand-by Power Consumption: < 0.5 W Operating Temperature: −20 °C to +45 °C Cooling: Fanless natural convection Protections: Short circuit, Over voltage, Over temperature, Overload Insulation Resistance: ≥ 10 MΩ (500 Vdc test) Isolation Voltage: 3750 V AC (Input to Output) Dimensions (L x W x H): 159 mm x 57.8 mm x 18 mm Weight: 250 g Safety & EMC Certificates: TUV, CE, SAA, EN61347, EN55015 Power Factor: 0.95 (Typical at full load) Manufacturer Warranty: 5 years Information about the SNAPPY SS60-48VF The SNAPPY SS60-48VF is a high-efficiency constant voltage driver engineered to provide a stable 48V DC output for sophisticated LED systems and industrial applications. This model is the efficiency leader of the SS60 series, boasting a typical efficiency of 89%, which ensures minimal power loss and reduced heat generation during operation. Its ultra-slim profile of just 18 mm allows for seamless integration into compact architectural features, furniture lighting, or signage where space is a premium. The inclusion of a built-in active PFC function guarantees a power factor of 0.95, significantly reducing electrical noise and ensuring the unit operates within the strictest energy regulations for modern lighting equipment. Durability and safety are at the core of the SS60-48VF’s design, featuring internal glue potting for enhanced component protection and a fanless architecture for silent, reliable performance. The unit is equipped with a comprehensive safety suite, including over-voltage and over-temperature protections that require a simple restart once conditions normalize, as well as a hiccup-mode short circuit protection for automatic recovery. With a MTBF of 200,000 hours and a rated lifetime of 30,000 hours under full load conditions, this power supply is built for longevity. Backed by a 5-year manufacturer warranty and certified to international standards like TUV and SAA, it offers a secure and high-performance solution for professional-grade 48V LED installations.