Technical Information & Details for the MEAN WELL RS-25-24 Power Supply Output Power: 26.4 W Output Voltage: 24 V DC Output Current: 1.1 A Input Voltage Range: 88 – 264 V AC / 125 – 373 V DC, 47 – 63 Hz Efficiency: 85 % Ripple & Noise: ≤ 120 mVp-p Inrush Current: 45 A / 230 V AC (Cold Start) No Load Power Consumption: < 0.5 W Operating Temperature: −20 °C to +70 °C Cooling: Free air convection Protection Functions: Short circuit, Overload, Over voltage Vibration Resistance: 5G vibration test compliance Isolation Voltage: 3000 V AC between Input and Output Dimensions (L x W x H): 78 mm x 51 mm x 28 mm Weight: 200 g Safety & EMC Certificates: UL62368-1, EN62368-1, CCC, CB, CE, EAC, BSMI LED Indicator: Power On Indicator Manufacturer Warranty: 3 Years Information about the MEAN WELL RS-25-24 The MEAN WELL RS-25-24 is a professional-grade 26.4W switching power supply that provides a highly stable 24V DC output, a standard voltage for most industrial control systems. This unit is specifically engineered for high reliability in volatile environments, featuring the capability to withstand 300VAC surge inputs for five seconds without damage. Its mechanical integrity is equally impressive, as it is tested to resist vibrations up to 5G, ensuring it remains operational in heavy-duty machinery or transport applications. The integration of 105°C long-life electrolytic capacitors ensures that the power supply maintains a high MTBF (Mean Time Between Failures) even when operating at its peak temperature of 70°C. Efficiency and safety are central to the RS-25-24 design, offering a typical efficiency of 85% and a remarkably low no-load power consumption of less than 0.5W. To prevent system damage during faults, the unit includes comprehensive protections against short circuits and over-voltages, utilizing a Hiccup mode for overload recovery that automatically resets once the fault is cleared. The miniature form factor allows it to be installed in space-constrained enclosures where free air convection provides sufficient cooling. Supported by a 3-year manufacturer warranty and global safety certifications, this power supply is a dependable choice for industrial automation, sensors, and telecommunications equipment.

Technical Information & Details for the MEAN WELL RS-25-12 Power Supply Output Power: 25.2 W Output Voltage: 12 V DC Output Current: 2.1 A Input Voltage Range: 88 – 264 V AC / 125 – 373 V DC, 47 – 63 Hz Efficiency: 81.5 % Ripple & Noise: ≤ 120 mVp-p Inrush Current: 45 A / 230 V AC (Cold Start) No Load Power Consumption: < 0.5 W Operating Temperature: −20 °C to +70 °C Cooling: Free air convection Protection Functions: Short circuit, Overload, Over voltage Vibration Resistance: 5G vibration test compliance Isolation Voltage: 3000 V AC between Input and Output Dimensions (L x W x H): 78 mm x 51 mm x 28 mm Weight: 200 g Safety & EMC Certificates: UL62368-1, EN62368-1, CCC, CB, CE, EAC, BSMI LED Indicator: Power On Indicator Manufacturer Warranty: 3 Years Information about the MEAN WELL RS-25-12 The MEAN WELL RS-25-12 is a highly efficient 25.2W switching power supply designed to provide a stable 12V DC output for a variety of industrial and commercial applications. A standout feature of this model is its exceptional electrical durability, as it is engineered to withstand 300VAC surge inputs for up to five seconds without damage. This makes it an ideal component for environments with fluctuating power quality. Furthermore, the unit is built to survive harsh mechanical conditions, having passed 5G vibration testing, which ensures its reliability when mounted on high-vibration machinery or in transport-related installations. The use of 105°C long-life electrolytic capacitors throughout the internal circuitry guarantees a long service life even under sustained thermal load. Operationally, the RS-25-12 offers a universal AC input range and maintains an incredibly low no-load power consumption of less than 0.5W, supporting modern green energy initiatives. Safety is a primary focus, with built-in protections against short circuits, overloads, and over-voltages; the Hiccup mode protection allows the device to automatically resume normal operation once a fault is cleared, minimizing the need for manual resets. Its miniature profile and cooling by free air convection allow for easy integration into compact control cabinets or telecommunications enclosures. Backed by a 3-year manufacturer warranty and a multitude of international safety certifications like UL and TUV, it represents a professional-grade solution for reliable 12V power delivery.

Technical Information & Details for the MEAN WELL HLG-120H-12AB Power Supply Rated Power: 120 W Output Voltage (DC): 12 V Rated Current: 10 A Input Voltage Range: 90 – 305 V AC / 127 – 431 V DC Efficiency (typ.): 92 % Ripple & Noise (max.): 150 mVp-p Adjustability: Voltage (10.8–13.5V) and current (5–10A) via internal potentiometers Dimming Technology: 3-in-1 dimming (1–10V DC, 10V PWM signal, or resistance) Operating Temp. (Case): −40 °C to +80 °C IP Rating: IP65 Typical Lifetime: > 62,000 hours Manufacturer Warranty: 7 Years Details about the MEAN WELL HLG-120H-12AB The MEAN WELL HLG-120H-12AB is the premier configuration in the 120W series, offering a unique hybrid of manual and electronic control features. Designed for sophisticated lighting architectures, this "AB-Type" model provides installers and engineers with the ultimate toolset for both installation calibration and ongoing dynamic operation. The core advantage of this unit is its comprehensive adjustment architecture. It features built-in potentiometers located under protective rubber seals on the rugged metal enclosure, allowing for the manual fine-tuning of output voltage and current. This is paired with an external 3-in-1 dimming control cable, which supports 1-10V DC, 10V PWM signals, and external resistance. This combination allows for a high degree of precision, enabling the user to set a performance baseline and vary the light output as needed via building automation systems. Featuring a dual-mode constant voltage and constant current output, the HLG-120H-12AB ensures high stability across diverse LED load types. The IP65-rated aluminum housing facilitates efficient thermal management and provides robust protection against environmental ingress. With 92% efficiency and active PFC, the driver meets stringent energy requirements while maintaining a lifespan of over 62,000 hours. Backed by a 7-year warranty and carrying the "Type HL" rating for hazardous locations, it is perfectly suited for smart urban lighting, high-bay industrial luminaires, and professional-grade horticultural lighting systems.

Technical Specifications & Details for MEAN WELL LRS-100-24 Power Supply Output Power: 108 W Output Voltage: 24 V DC Output Current: 4.5 A Input Voltage Range: 85 – 264 V AC / 120 – 373 V DC, 47 – 63 Hz Efficiency: up to 90% Ripple & Noise: ≤ 150 mVp-p Inrush Current: max. 50 A @230 VAC No Load Power Consumption: < 0.3 W Operating Temperature: -30 °C to +70 °C Cooling: Free air convection Protection Functions: Short circuit, Overload, Over voltage Overvoltage Category: OVC III Isolation Voltage: 3.75 kV AC between input and output Dimensions (H x W x D): 30 mm x 97 mm x 129 mm Weight: approx. 340 g Safety & EMC Certificates: CE, UL 62368-1, TUV, CB, EAC LED Indicator: Power On Indicator Manufacturer Warranty: 3 Years Detailed Information on the MEAN WELL LRS-100-24 The MEAN WELL LRS-100-24 is a premier 108W single-output enclosed power supply that has become a staple in industrial automation due to its ultra-compact 30mm low-profile design. This form factor is specifically optimized for 1U installations, providing engineers with the flexibility to design smaller control cabinets without sacrificing power density. Engineered for high-stress environments, this power supply features a vibration resistance of up to 5G and a rugged metallic mesh housing that facilitates efficient heat dissipation through natural air convection, ensuring stable performance even at elevated ambient temperatures up to 70°C. Technically, the LRS-100-24 stands out with an impressive efficiency of up to 90%, which significantly minimizes thermal waste and enhances the overall longevity of the connected system. It is fully compliant with Over Voltage Category III (OVC III) standards, allowing it to be safely integrated into fixed industrial distribution panels with an added layer of surge protection. With its extremely low standby power consumption of less than 0.3W, this unit is a sustainable choice for energy-conscious projects, providing a reliable 24V DC / 4.5A output that is ideal for PLC systems, sensors, and high-performance motor controls.

30W AC-DC PCB Grünes Mount Modul 30W AC-DC PCB Mount Green Power Module

Technische Eigenschaften des MEAN WELL NPF-120D-12 Nennleistung: 120 W Eingangsbereich: 90 bis 305VAC Sekundärspannung: 12 VDC 3 in 1 Dimmfunktion aktive PFC-Funktion Class II Netzteil Schutzart IP67 Konvektionsgekühlt Wirkungsgrad von 88,5% Geringer Standby-Verbrauch Schutz vor Kurzschluss, Überlast sowie Überspannung Überhitzungsschutz Informationen zum MEAN WELL NPF-120D-12 Beim Mean Well NPF-120D-12 handelt es sich um ein hochwertiges LED-Netzteil im Kunststoffgehäuse mit der integrierten aktiven PFC-Funktion für Indoor- und Outdoor -Installationen. Am Eingang verfügt das LED-Netzgerät über einen weiten AC-Spannungsbereich von 90 bis 305 V mit Derating bei 90 - 100 VAC und liefert eine geregelte Nennleistung von 120 W bei einer gebräuchlichen 12 VDC Kleinspannung. Dabei beträgt der Ausgangsstrom 10 A. Die gesamte MeanWell NPF-120D-Serie zeichnet sich vor allem durch ihre 3 in 1 Dimmung aus, die über Anlegung einer externen 0 - 10 VDC Spannung, eines 10 V PMW Signal oder per Widerstand erfolgt. Falls Sie Fragen dazu haben, können Sie sich gerne jederzeit mit uns in Verbindung setzen. Mit der Schutzart IP67 können die Class II Schaltnetzteile der Mean Well NPF-120D-Serie nicht nur die trockenen, sondern auch die feuchten Arbeitsumgebungen ausreichend bewältigen. Damit eignen sich die LED-Netzgeräte für vielfältige Anwendungen wie z. B. LED-Flächenleuchten, LED-Tunnelbeleuchtungen sowie LED-Anzeigenschilder. Die Produktreihe von MeanWell bietet weiterhin die Kühlung durch freie Luftkonvektion, welche für eine geräuscharme Stromversorgung sorgt. Zudem können die LED-Netzteile der MeanWell NPF-120D-Serie einen hohen Wirkungsgrad von bis zu 90% bei einem besonders niedrigen Standby-Verbrauch von unter 0,5 W erreichen. Ausgangsseitig bieten die Mean Well NPF-120D-Netzteile einen Schutz gegen Kurzschluss, Überlast, Übertemperatur sowie Überspannung. Die LED-Schaltnetzteile von MeanWell erfüllen zudem alle grundlegenden Sicherheitsstandards gemäß UL8750, EN61347-1, EN61347-2-13, EN62368 sowie weitere Anforderungen.