PWM-60-12

Quantity	Unit price
from 1	€24.60*
from 5	€23.40*
from 10	€22.40*
from 20	€21.70*

Prices excl. VAT plus shipping costs zzgl. Versandkosten

Product number: 16153

Product information "PWM-60-12"

Technical Information & Details of the MEAN WELL PWM-60-12 LED Driver

Output power: 60 W
DC output voltage: 12 V DC
Rated output current: 5 A
Output type: Constant voltage PWM style output
Dimming range: 0 – 100 % (3‑in‑1: 0–10 VDC, 10 V PWM signal, or resistance; DA/DA2: DALI/DALI‑2)
PWM output frequency: approx. 1.47 kHz (Blank/DA) / 2.5 kHz (DA2)
Overvoltage protection threshold: 15 – 17 V DC
Setup / rise time: ≤ 500 ms, 80 ms @ 115 / 230 VAC (full load)
Hold‑up time (typ.): approx. 16 ms @ 115 / 230 VAC (full load)
Input voltage range: 90 – 305 V AC / 127 – 431 V DC, 47 – 63 Hz
Power factor (typ.): PF > 0.97 @ 115 VAC, PF > 0.95 @ 230 VAC, PF > 0.92 @ 277 VAC (full load)
Efficiency (typ.): approx. 86 %
AC input current (typ.): 0.8 A @ 115 VAC / 0.4 A @ 230 VAC / 0.32 A @ 277 VAC
Inrush current (typ.): cold start, 50 A @ 230 VAC (≈270 μs at 50 % I_peak)
Leakage current: < 0.25 mA @ 277 VAC
Overload protection: 108 – 130 % of rated output power, hiccup mode, auto recovery
Overvoltage protection: Shut down output voltage, re‑power on to recover
Overtemperature protection: Shut down output voltage, re‑power on to recover (DA2: hiccup mode)
Short‑circuit protection: Hiccup mode, auto recovery
Operating temperature (case T_case): −40 °C to +85 °C (see “Output load vs temperature” derating)
Operating humidity: 20 – 95 % RH, non‑condensing
Storage temperature / humidity: −40 °C to +80 °C, 10 – 95 % RH
Temperature coefficient: ± 0.03 % / °C (0 – 50 °C)
Vibration: 10 – 500 Hz, 5 G, 12 min./cycle, 72 min. along X, Y, Z axes
Withstand voltage: 3.75 kVAC (input–output), 1.5 kVAC (input–DA), 1.5 kVAC (output–DA)
Isolation resistance: > 100 MΩ @ 500 V DC, 25 °C, 70 % RH
Safety standards: UL8750 (type “HL”, except DA), UL879 (12 V, 24 V Blank only), ENEC EN 61347‑1, EN 61347‑2‑13 (independent), EN 62384, BIS IS 15885 (Part 2/Sec 13; 12/24/48 Blank & 12/24‑DA2), EAC TP TC 004, GB19510.1, GB19510.14; IP67; suitable for emergency lighting per EN 61347‑2‑13 Annex J
DALI standards (DA/DA2): IEC 62386‑101/102/207/251, Device Type 6 (DT6)
EMC emission: EN 55015, EN 61000‑3‑2 Class C (≥60 % load), EN 61000‑3‑3, GB/T 17743, GB17625.1, EAC TP TC 020
EMC immunity: EN 61000‑4‑2,3,4,5,6,8,11; EN 61547 (light industry level, surge Line–Line 2 kV), EAC TP TC 020
MTBF (typ.): 2,626,600 h (Telcordia SR‑332, 25 °C) / 227,100 h (MIL‑HDBK‑217F, 25 °C)
Dimensions (L x W x H): 150 mm x 53 mm x 35 mm
Weight: approx. 0.49 kg
Case & protection: fully encapsulated plastic case, IP67, Class II/2
No‑load power consumption: < 0.5 W
Design: 60 W constant‑voltage PWM LED driver, Class 2, LPS

Information about the MEAN WELL PWM-60-12

The MEAN WELL PWM‑60‑12 is a 60 W constant‑voltage LED driver with a PWM‑style output, engineered to maintain brightness homogeneity when driving 12 V LED strips and other constant‑voltage LED loads. Its PWM operation at around 1.47 kHz (Blank/DA) or 2.5 kHz (DA2) ensures smooth dimming while preserving color consistency and avoiding visible flicker across the entire dimming range.

Featuring typical efficiency around 86 %, active PFC and a wide 90–305 V AC input range, the driver is highly energy‑efficient and suitable for global use. The IP67 fully encapsulated housing, broad −40 to +85 °C case temperature rating and extensive protection set (short‑circuit, overload, overvoltage, overtemperature) make the PWM‑60‑12 robust enough for dry, damp and wet locations, including certain emergency lighting applications under IEC 61347‑2‑13.

With its 3‑in‑1 dimming interface (0–10 V, 10 V PWM signal, resistance) on the Blank version and optional DALI/DALI‑2 control (DA/DA2 types), the PWM‑60‑12 offers strong integration flexibility for modern lighting control systems and building automation. Combined with long lifetime ratings and comprehensive international safety and EMC approvals, it is well suited to professional LED strip lighting, indoor LED lighting, decorative installations, architectural lighting and industrial projects that require reliable 12 V constant‑voltage PWM drivers.

Weiterführende Links zu "PWM-60-12"

Fragen zum Artikel?
Weitere Artikel von MEAN WELL

Verfügbare Downloads

Download PWM-60 Datenblatt

Eigenschaften für "PWM-60-12"

Breite:	53
Dimming:	3 in 1 Dimmung (0-10V, Poti, PWM)
Effizienz:	86
Gewicht:	0,53kg
Herstellergarantie:	Five years
Höhe:	35
Länge:	150
Power:	60
Protection class:	Class 2, Class I, Class II
Rated current:	5
Schutzart:	IP67
Voltage:	12 VDC
Zulassungen:	CB, CCC, CE, ENEC, MM, SELV, TÜV, UL

Cutsomers also bought

PWM-40-12

Technical Information & Details of the MEAN WELL PWM-40-12 LED Driver Output power: 40.08 W DC output voltage: 12 V DC Rated output current: 3.34 A Output type: Constant voltage PWM style output Dimming range: 0 – 100 % (3-in-1: 0–10 VDC, 10 V PWM signal, or resistance) PWM output frequency: approx. 1.47 kHz Overvoltage protection threshold: 15 – 17 V DC Setup / rise time: ≤ 500 ms, 80 ms @ 115 / 230 VAC (full load) Hold-up time (typ.): approx. 16 ms @ 115 / 230 VAC (full load) Input voltage range: 90 – 305 V AC / 127 – 431 V DC, 47 – 63 Hz Power factor (typ.): PF > 0.97 @ 115 VAC, PF > 0.95 @ 230 VAC, PF > 0.92 @ 277 VAC (full load) Efficiency (typ.): approx. 86 % AC input current (typ.): 0.6 A @ 115 VAC / 0.3 A @ 230 VAC / 0.25 A @ 277 VAC Inrush current (typ.): cold start, 50 A @ 230 VAC (≈270 μs at 50 % Ipeak) Leakage current: < 0.25 mA @ 277 VAC Overload protection: 108 – 130 % of rated output power, hiccup mode, auto recovery Overvoltage protection: Shut down output, re-power on to recover Overtemperature protection: Shut down output, re-power on to recover Short-circuit protection: Hiccup mode, auto recovery Operating temperature (case Tcase): −40 °C to +85 °C (see “Output load vs temperature” derating) Operating humidity: 20 – 95 % RH, non-condensing Storage temperature / humidity: −40 °C to +80 °C, 10 – 95 % RH Temperature coefficient: ± 0.03 % / °C (0 – 50 °C) Vibration: 10 – 500 Hz, 5 G, 12 min./cycle, 72 min. along X, Y, Z Withstand voltage: 3.75 kVAC between input and output Isolation resistance: > 100 MΩ @ 500 V DC, 25 °C, 70 % RH Safety standards: UL8750 (type “HL”), UL879 (12 V, 24 V), CSA C22.2 No. 250.13-12, ENEC EN 61347-1, EN 61347-2-13 (independent), EN 62384, IS 15885 (12 V, 24 V), EAC TP TC 004, GB19510.1, GB19510.14; IP67 EMC emission: EN 55015, EN 61000-3-2 Class C (≥60 % load), EN 61000-3-3, GB/T 17743, GB17625.1, EAC TP TC 020 EMC immunity: EN 61000-4-2,3,4,5,6,8,11; EN 61547 (light industry level, surge Line–Line 2 kV), EAC TP TC 020 MTBF (typ.): 2,625,400 h (Telcordia SR-332, 25 °C) / 226,400 h (MIL-HDBK-217F, 25 °C) Dimensions (L x W x H): 150 mm x 53 mm x 35 mm Weight: approx. 0.49 kg Case & protection: fully encapsulated plastic case, IP67, Class II No-load power consumption: < 0.5 W Design: constant-voltage PWM LED driver, Class 2, LPS Information about the MEAN WELL PWM-40-12 The MEAN WELL PWM-40-12 is a 40 W constant-voltage LED driver with a PWM-style output at around 1.47 kHz, designed to keep LED color temperature and brightness uniform across the entire dimming range. This makes it particularly well suited for LED strip lighting, indoor accent lighting, and architectural or decorative LED installations where visual consistency is critical. With typical efficiency up to 86 %, active PFC, and a wide 90–305 V AC input range, the driver delivers energy-efficient performance and can be used worldwide. The fully encapsulated IP67 housing, wide −40 to +85 °C case temperature capability, and comprehensive protection functions (short-circuit, overload, overvoltage, overtemperature in hiccup/shutdown mode) ensure reliable operation in dry, damp, or wet locations. The integrated 3-in-1 dimming interface (0–10 V, 10 V PWM, resistance) with dim-to-off support gives excellent flexibility for modern control systems and building automation. Combined with broad international safety and EMC approvals (including type “HL” for use in Class I, Division 2 hazardous locations), the PWM-40-12 is an ideal choice for professional LED strip projects and demanding commercial or industrial lighting applications.

from €21.30*

Details

PWM-90-12

Technical Information & Details for MEAN WELL PWM-90-12 LED Driver Output power: 90 W Output voltage: 12 V DC Rated output current: 7.5 A Output current range: 0 – 7.5 A (PWM‑modulated constant voltage output) Output type: Constant voltage, PWM style output Dimming range: 0 – 100% (3‑in‑1 dimming) Dimming interfaces: 0–10 V DC, 10 V PWM signal (100 Hz – 3 kHz), resistive dimming PWM frequency: approx. 1.47 kHz (Blank / DA type), 2.5 kHz (DA2 type) No‑load power consumption: < 0.5 W Input voltage range: 90 – 305 V AC / 127 – 431 V DC, 47 – 63 Hz AC input current (typical): 0.95 A @ 115 V AC / 0.5 A @ 230 V AC / 0.4 A @ 277 V AC Power factor (typical): > 0.98 @ 115 V AC, > 0.96 @ 230 V AC, > 0.92 @ 277 V AC (full load) Efficiency (typical): 88% Total harmonic distortion (THD): < 20% (≥ 60% load @ 115/230 V AC, ≥ 75% load @ 277 V AC) Inrush current (cold start): 60 A @ 230 V AC (twidth ≈ 550 µs, 50% Ipeak) Leakage current: < 0.25 mA @ 277 V AC Overload protection: 108 – 130% of rated power, hiccup mode, automatic recovery Over‑voltage protection: approx. 15 – 17 V DC, shutdown, restart after re‑powering Over‑temperature protection: output shutdown, automatic restart after cooling Operating temperature (case range): −40 °C to +85 °C (according to “output load vs. temperature” derating curve) Maximum case temperature (T-case max): +85 °C Operating humidity: 20 – 95% RH, non‑condensing Storage conditions: −40 °C to +80 °C, 10 – 95% RH Ingress protection: IP67, fully encapsulated Case material: fully isolated plastic housing Insulation class: Class II (no protective earth connection) Dielectric strength: input–output: 3.75 kV AC Insulation resistance: > 100 MΩ @ 500 V DC, 25 °C, 70% RH Vibration: 10 – 500 Hz, 5 G, 12 min./cycle, 72 min. per axis (X, Y, Z) MTBF: approx. 2.39 million h (Telcordia SR‑332, 25 °C) Dimensions (L x W x H): 171 mm x 63 mm x 37.5 mm Weight: approx. 0.77 kg Primary connections: AC/L (brown), AC/N (blue), pre‑wired input cable Secondary connections: Vo+ (red), Vo− (black), dimming leads (purple/pink depending on type) Recommended mounting: horizontal mounting, case type PWM‑90P, free air convection Safety standards: UL 8750 (except DA type), CSA C22.2 No. 250.13‑12, ENEC EN 61347‑1 / EN 61347‑2‑13 (independent), EN 62384, BIS IS 15885 (for 12/24/48 V blank and DA2 types), EAC, GB19510.1 / GB19510.14 EMC standards: EN 55015, EN 61000‑3‑2 Class C (from 60% load), EN 61000‑3‑3, EN 61547, EN 61000‑4‑2/3/4/5/6/8/11, GB/T 17743, GB 17625.1 DALI (DA / DA2 types): IEC 62386‑101/102/207/251, Device Type 6 (DT6), 16 groups / 64 addresses (DA/DA2 only) Lifetime: typ. > 50,000 h at T-case ≈ 75 °C Warranty: 5 years Information about MEAN WELL PWM-90-12 The MEAN WELL PWM‑90‑12 is a 90 W constant voltage LED driver with PWM output that maintains very uniform LED strip brightness over the full dimming range. With its wide 90–305 V AC input, high efficiency, IP67 encapsulation and defined T‑case range from −40 °C to +85 °C, it is designed for durable, fanless operation in indoor and protected outdoor installations. Thanks to 3‑in‑1 dimming (0–10 V, PWM, resistance), active PFC, low standby consumption and long service life, the PWM‑90‑12 is well suited for professional LED strip, decorative, architectural and industrial lighting projects that require precise brightness control and 24/7 operation.

from €30.70*

Details