Technical Information & Details of the MEAN WELL PWM-60-12 LED Driver Output power: 60 W DC output voltage: 12 V DC Rated output current: 5 A Output type: Constant voltage PWM style output Dimming range: 0 – 100 % (3‑in‑1: 0–10 VDC, 10 V PWM signal, or resistance; DA/DA2: DALI/DALI‑2) PWM output frequency: approx. 1.47 kHz (Blank/DA) / 2.5 kHz (DA2) Overvoltage protection threshold: 15 – 17 V DC Setup / rise time: ≤ 500 ms, 80 ms @ 115 / 230 VAC (full load) Hold‑up time (typ.): approx. 16 ms @ 115 / 230 VAC (full load) Input voltage range: 90 – 305 V AC / 127 – 431 V DC, 47 – 63 Hz Power factor (typ.): PF > 0.97 @ 115 VAC, PF > 0.95 @ 230 VAC, PF > 0.92 @ 277 VAC (full load) Efficiency (typ.): approx. 86 % AC input current (typ.): 0.8 A @ 115 VAC / 0.4 A @ 230 VAC / 0.32 A @ 277 VAC Inrush current (typ.): cold start, 50 A @ 230 VAC (≈270 μs at 50 % Ipeak) Leakage current: < 0.25 mA @ 277 VAC Overload protection: 108 – 130 % of rated output power, hiccup mode, auto recovery Overvoltage protection: Shut down output voltage, re‑power on to recover Overtemperature protection: Shut down output voltage, re‑power on to recover (DA2: hiccup mode) Short‑circuit protection: Hiccup mode, auto recovery Operating temperature (case Tcase): −40 °C to +85 °C (see “Output load vs temperature” derating) Operating humidity: 20 – 95 % RH, non‑condensing Storage temperature / humidity: −40 °C to +80 °C, 10 – 95 % RH Temperature coefficient: ± 0.03 % / °C (0 – 50 °C) Vibration: 10 – 500 Hz, 5 G, 12 min./cycle, 72 min. along X, Y, Z axes Withstand voltage: 3.75 kVAC (input–output), 1.5 kVAC (input–DA), 1.5 kVAC (output–DA) Isolation resistance: > 100 MΩ @ 500 V DC, 25 °C, 70 % RH Safety standards: UL8750 (type “HL”, except DA), UL879 (12 V, 24 V Blank only), ENEC EN 61347‑1, EN 61347‑2‑13 (independent), EN 62384, BIS IS 15885 (Part 2/Sec 13; 12/24/48 Blank & 12/24‑DA2), EAC TP TC 004, GB19510.1, GB19510.14; IP67; suitable for emergency lighting per EN 61347‑2‑13 Annex J DALI standards (DA/DA2): IEC 62386‑101/102/207/251, Device Type 6 (DT6) EMC emission: EN 55015, EN 61000‑3‑2 Class C (≥60 % load), EN 61000‑3‑3, GB/T 17743, GB17625.1, EAC TP TC 020 EMC immunity: EN 61000‑4‑2,3,4,5,6,8,11; EN 61547 (light industry level, surge Line–Line 2 kV), EAC TP TC 020 MTBF (typ.): 2,626,600 h (Telcordia SR‑332, 25 °C) / 227,100 h (MIL‑HDBK‑217F, 25 °C) Dimensions (L x W x H): 150 mm x 53 mm x 35 mm Weight: approx. 0.49 kg Case & protection: fully encapsulated plastic case, IP67, Class II/2 No‑load power consumption: < 0.5 W Design: 60 W constant‑voltage PWM LED driver, Class 2, LPS Information about the MEAN WELL PWM-60-12 The MEAN WELL PWM‑60‑12 is a 60 W constant‑voltage LED driver with a PWM‑style output, engineered to maintain brightness homogeneity when driving 12 V LED strips and other constant‑voltage LED loads. Its PWM operation at around 1.47 kHz (Blank/DA) or 2.5 kHz (DA2) ensures smooth dimming while preserving color consistency and avoiding visible flicker across the entire dimming range. Featuring typical efficiency around 86 %, active PFC and a wide 90–305 V AC input range, the driver is highly energy‑efficient and suitable for global use. The IP67 fully encapsulated housing, broad −40 to +85 °C case temperature rating and extensive protection set (short‑circuit, overload, overvoltage, overtemperature) make the PWM‑60‑12 robust enough for dry, damp and wet locations, including certain emergency lighting applications under IEC 61347‑2‑13. With its 3‑in‑1 dimming interface (0–10 V, 10 V PWM signal, resistance) on the Blank version and optional DALI/DALI‑2 control (DA/DA2 types), the PWM‑60‑12 offers strong integration flexibility for modern lighting control systems and building automation. Combined with long lifetime ratings and comprehensive international safety and EMC approvals, it is well suited to professional LED strip lighting, indoor LED lighting, decorative installations, architectural lighting and industrial projects that require reliable 12 V constant‑voltage PWM drivers.

Technical Information & Details on MEAN WELL HLG-60H-24B Power Supply Output Power: 60 W Output Voltage: 24 V DC Output Current: 2.5 A Input Voltage Range: 90 – 305 V AC / 127 – 431 V DC, 47 – 63 Hz Efficiency: up to 89.5 % Ripple & Noise: ≤ 200 mVp-p Inrush Current: typ. 55 A / 26 µs @ 230 VAC No-Load Power Consumption: < 0.75 W Operating Temperature: −40 °C to +80 °C (case temperature) Cooling: fanless natural convection Protection Functions: Short circuit (Hiccup, auto recovery), Overload, Overvoltage, Overtemperature Overvoltage Category: II Isolation Voltage: 3.75 kV AC between input and output Dimensions (H x W x D): 171 mm x 61.5 mm x 36.8 mm Weight: ca. 730 g Safety & EMC Certifications: UL8750, CB, CE, TÜV, EAC, IP67 Manufacturer Warranty: 7 Years Information on MEAN WELL HLG-60H-24B The MEAN WELL HLG-60H-24B is a dimmable, fully waterproof 60 W LED driver power supply featuring outstanding efficiency up to 89.5 % and extreme temperature range from -40 °C to +80 °C for professional outdoor applications. It delivers stable 24 V DC / 2.5 A output in constant voltage and constant current modes with innovative 3-in-1 dimming function (1-10 V DC, 10 V PWM, resistance) for precise light control. Full IP67 protection, rugged metal housing construction, and comprehensive protection functions with auto-recovery make it perfect for LED panel lighting, floodlights, and smart industrial lighting systems.

Technical Information & Details on MEAN WELL HLG-40H-24B Power Supply Output Power: 40 W Output Voltage: 24 V DC Output Current: 1.67 A Output Voltage Adjustable: 17 – 27 V Input Voltage Range: 90 – 305 V AC / 127 – 431 V DC, 47 – 63 Hz Efficiency: up to 88 % Ripple & Noise: ≤ 200 mVp-p Inrush Current: 50 A / 230 VAC No-Load Power Consumption: < 0.5 W Operating Temperature: −40 °C to +80 °C Cooling: fanless Protection Functions: Short Circuit (Hiccup), Overload, Overvoltage, Over Temperature IP Rating: IP65 / IP67 Isolation Voltage: 3.75 kV AC (IP-OP) Dimensions (L x W x H): 171 x 61.5 x 36.8 mm Weight: approx. 730 g Safety & EMC Certifications: UL8750, CB, CE, EAC, KC Manufacturer Warranty: 7 Years Information on MEAN WELL HLG-40H-24B The MEAN WELL HLG-40H-24B is a highly efficient 40W LED driver power supply with rugged metal housing (Class I design) and IP65/IP67 protection for demanding outdoor and wet environments. It excels with a wide input voltage range of 90–305 V AC, superior reliability from −40 to +80 °C operating temperature, and self-recovering protection functions. Unique 3-in-1 dimming (1-10V, PWM, resistance) plus adjustable output parameters make it perfect for professional higher-voltage LED lighting, street lamps, and industrial applications with maximum longevity (MTBF > 300,000 hours).

Technical Information & Details for MEAN WELL HLG-150H-24B Power Supply [cite_start]Output Power: 151.2 W [cite: 6] [cite_start]Output Voltage: 24 V DC [cite: 6] [cite_start]Output Current: 6.3 A [cite: 6] [cite_start]Input Voltage Range: 90 – 305 V AC / 127 – 431 V DC, 47 – 63 Hz [cite: 6] [cite_start]Efficiency: up to 94% [cite: 6] Ripple & [cite_start]Noise: ≤ 200 mVp-p [cite: 6] Inrush Current: max. [cite_start]65 A (Cold Start) @ 230 V AC [cite: 6] No-load Power Consumption: < [cite_start]0.5 W [cite: 10] [cite_start]Operating Temperature: −40 °C to +90 °C (Case Temperature) [cite: 3, 6] [cite_start]Cooling: Fanless, free air convection [cite: 3] [cite_start]Protection Functions: Short circuit, Overload, Over voltage, Over temperature [cite: 6] [cite_start]IP Rating: IP67 for indoor or outdoor installations [cite: 4] [cite_start]Withstand Voltage: 3.75KVAC (Input to Output) [cite: 6] [cite_start]Dimensions (L x W x H): 228 mm x 68 mm x 38.8 mm [cite: 6] Weight: approx. [cite_start]1150 g [cite: 6] Safety & [cite_start]EMC Certificates: UL8750, EN61347-1, EN61347-2-13, IP67, CE [cite: 6] [cite_start]Dimming Function: 3-in-1 dimming (1-10V DC, 10V PWM signal or resistance) [cite: 4, 22] [cite_start]Manufacturer Warranty: 7 Years [cite: 2] About the MEAN WELL HLG-150H-24B [cite_start]The MEAN WELL HLG-150H-24B is a high-grade 150W LED driver engineered for superior performance and long-term durability in professional lighting applications[cite: 2, 79]. [cite_start]Featuring a robust metal housing with an IP67 ingress protection rating, this unit is fully protected against dust and temporary immersion in water, making it suitable for harsh environments, including outdoor street lighting and high-bay industrial fixtures[cite: 3, 4, 68]. [cite_start]The "B" model stands out for its advanced 3-in-1 dimming functionality, allowing users to adjust the output constant current level via 1-10V DC, 10V PWM signal, or resistance, providing optimal design flexibility for modern LED systems[cite: 4, 22]. [cite_start]Its ultra-high efficiency of up to 94% ensures minimal energy waste and thermal stress, contributing to an extensive typical lifetime of more than 62,000 hours[cite: 2, 6, 29]. [cite_start]This driver utilizes a dual-mode constant voltage and constant current output, ensuring stable power delivery for both direct-drive LEDs and systems with additional DC drivers[cite: 2, 19]. [cite_start]MEAN WELL stands behind the HLG-150H series' industrial quality with an exceptional 7-year manufacturer warranty[cite: 2].

Technical Information & Details of the MEAN WELL PWM-40-24 LED Driver Output power: 40.08 W DC output voltage: 24 V DC Rated output current: 1.67 A Output type: Constant voltage PWM style output Dimming range: 0 – 100 % (3‑in‑1: 0–10 VDC, 10 V PWM signal, or resistance) PWM output frequency: approx. 1.47 kHz Overvoltage protection threshold: 28 – 34 V DC Setup / rise time: ≤ 500 ms, 80 ms @ 115 / 230 VAC (full load) Hold‑up time (typ.): approx. 16 ms @ 115 / 230 VAC (full load) Input voltage range: 90 – 305 V AC / 127 – 431 V DC, 47 – 63 Hz Power factor (typ.): PF > 0.97 @ 115 VAC, PF > 0.95 @ 230 VAC, PF > 0.92 @ 277 VAC (full load) Efficiency (typ.): approx. 89 % AC input current (typ.): 0.6 A @ 115 VAC / 0.3 A @ 230 VAC / 0.25 A @ 277 VAC Inrush current (typ.): cold start, 50 A @ 230 VAC (≈270 μs at 50 % Ipeak) Leakage current: < 0.25 mA @ 277 VAC Overload protection: 108 – 130 % of rated output power, hiccup mode, auto recovery Overvoltage protection: Shut down output voltage, re‑power on to recover Overtemperature protection: Shut down output voltage, re‑power on to recover Short‑circuit protection: Hiccup mode, auto recovery Operating temperature (case Tcase): −40 °C to +85 °C (see “Output load vs temperature” derating) Operating humidity: 20 – 95 % RH, non‑condensing Storage temperature / humidity: −40 °C to +80 °C, 10 – 95 % RH Temperature coefficient: ± 0.03 % / °C (0 – 50 °C) Vibration: 10 – 500 Hz, 5 G, 12 min./cycle, 72 min. along X, Y, Z axes Withstand voltage: 3.75 kVAC between input and output Isolation resistance: > 100 MΩ @ 500 V DC, 25 °C, 70 % RH Safety standards: UL8750 (type “HL”), UL879 (12 V, 24 V), CSA C22.2 No. 250.13‑12, ENEC EN 61347‑1, EN 61347‑2‑13 (independent), EN 62384, IS 15885 (12 V, 24 V), EAC TP TC 004, GB19510.1, GB19510.14; IP67 EMC emission: EN 55015, EN 61000‑3‑2 Class C (≥60 % load), EN 61000‑3‑3, GB/T 17743, GB17625.1, EAC TP TC 020 EMC immunity: EN 61000‑4‑2,3,4,5,6,8,11; EN 61547 (light industry level, surge Line–Line 2 kV), EAC TP TC 020 MTBF (typ.): 2,625,400 h (Telcordia SR‑332, 25 °C) / 226,400 h (MIL‑HDBK‑217F, 25 °C) Dimensions (L x W x H): 150 mm x 53 mm x 35 mm Weight: approx. 0.49 kg Case & protection: fully encapsulated plastic case, IP67, Class II No‑load power consumption: < 0.5 W Design: constant‑voltage PWM LED driver, Class 2, LPS Information about the MEAN WELL PWM-40-24 The MEAN WELL PWM‑40‑24 is a 40 W constant‑voltage LED driver with a PWM‑style output at around 1.47 kHz, designed to keep LED strip color temperature and brightness uniform throughout the entire dimming range. This makes it a strong choice for 24 V LED strips, indoor accent lighting, and architectural or decorative LED projects where visual consistency is essential. With typical efficiency up to 89 %, active power factor correction and a wide 90–305 V AC input range, the driver operates efficiently and can be deployed in worldwide installations. The fully encapsulated IP67 housing, wide −40 to +85 °C case temperature rating and comprehensive protection features (short‑circuit, overload, overvoltage and overtemperature in hiccup/shutdown mode) provide reliable operation in dry, damp and wet locations. The integrated 3‑in‑1 dimming interface (0–10 V, 10 V PWM signal, resistance) with dim‑to‑off capability offers excellent flexibility for modern control systems and building automation. Combined with extensive international safety and EMC certifications (including type “HL” for use in Class I, Division 2 hazardous locations), the PWM‑40‑24 is ideally suited for professional 24 V LED strip lighting in commercial and industrial environments.

Technical Information & Details for MEAN WELL PWM-90-12 LED Driver Output power: 90 W Output voltage: 12 V DC Rated output current: 7.5 A Output current range: 0 – 7.5 A (PWM‑modulated constant voltage output) Output type: Constant voltage, PWM style output Dimming range: 0 – 100% (3‑in‑1 dimming) Dimming interfaces: 0–10 V DC, 10 V PWM signal (100 Hz – 3 kHz), resistive dimming PWM frequency: approx. 1.47 kHz (Blank / DA type), 2.5 kHz (DA2 type) No‑load power consumption: < 0.5 W Input voltage range: 90 – 305 V AC / 127 – 431 V DC, 47 – 63 Hz AC input current (typical): 0.95 A @ 115 V AC / 0.5 A @ 230 V AC / 0.4 A @ 277 V AC Power factor (typical): > 0.98 @ 115 V AC, > 0.96 @ 230 V AC, > 0.92 @ 277 V AC (full load) Efficiency (typical): 88% Total harmonic distortion (THD): < 20% (≥ 60% load @ 115/230 V AC, ≥ 75% load @ 277 V AC) Inrush current (cold start): 60 A @ 230 V AC (twidth ≈ 550 µs, 50% Ipeak) Leakage current: < 0.25 mA @ 277 V AC Overload protection: 108 – 130% of rated power, hiccup mode, automatic recovery Over‑voltage protection: approx. 15 – 17 V DC, shutdown, restart after re‑powering Over‑temperature protection: output shutdown, automatic restart after cooling Operating temperature (case range): −40 °C to +85 °C (according to “output load vs. temperature” derating curve) Maximum case temperature (T-case max): +85 °C Operating humidity: 20 – 95% RH, non‑condensing Storage conditions: −40 °C to +80 °C, 10 – 95% RH Ingress protection: IP67, fully encapsulated Case material: fully isolated plastic housing Insulation class: Class II (no protective earth connection) Dielectric strength: input–output: 3.75 kV AC Insulation resistance: > 100 MΩ @ 500 V DC, 25 °C, 70% RH Vibration: 10 – 500 Hz, 5 G, 12 min./cycle, 72 min. per axis (X, Y, Z) MTBF: approx. 2.39 million h (Telcordia SR‑332, 25 °C) Dimensions (L x W x H): 171 mm x 63 mm x 37.5 mm Weight: approx. 0.77 kg Primary connections: AC/L (brown), AC/N (blue), pre‑wired input cable Secondary connections: Vo+ (red), Vo− (black), dimming leads (purple/pink depending on type) Recommended mounting: horizontal mounting, case type PWM‑90P, free air convection Safety standards: UL 8750 (except DA type), CSA C22.2 No. 250.13‑12, ENEC EN 61347‑1 / EN 61347‑2‑13 (independent), EN 62384, BIS IS 15885 (for 12/24/48 V blank and DA2 types), EAC, GB19510.1 / GB19510.14 EMC standards: EN 55015, EN 61000‑3‑2 Class C (from 60% load), EN 61000‑3‑3, EN 61547, EN 61000‑4‑2/3/4/5/6/8/11, GB/T 17743, GB 17625.1 DALI (DA / DA2 types): IEC 62386‑101/102/207/251, Device Type 6 (DT6), 16 groups / 64 addresses (DA/DA2 only) Lifetime: typ. > 50,000 h at T-case ≈ 75 °C Warranty: 5 years Information about MEAN WELL PWM-90-12 The MEAN WELL PWM‑90‑12 is a 90 W constant voltage LED driver with PWM output that maintains very uniform LED strip brightness over the full dimming range. With its wide 90–305 V AC input, high efficiency, IP67 encapsulation and defined T‑case range from −40 °C to +85 °C, it is designed for durable, fanless operation in indoor and protected outdoor installations. Thanks to 3‑in‑1 dimming (0–10 V, PWM, resistance), active PFC, low standby consumption and long service life, the PWM‑90‑12 is well suited for professional LED strip, decorative, architectural and industrial lighting projects that require precise brightness control and 24/7 operation.