CLG-100-12 End of Life

Discontinued Product see replacement: XLG-75, ELG-75, HLG-75

Discontinued model See successor: HDR-30

Discontinued Product see replacement: HDR-60

Technical Information & Details of the MEAN WELL PWM-60-12 LED Driver Output power: 60 W DC output voltage: 12 V DC Rated output current: 5 A Output type: Constant voltage PWM style output Dimming range: 0 – 100 % (3‑in‑1: 0–10 VDC, 10 V PWM signal, or resistance; DA/DA2: DALI/DALI‑2) PWM output frequency: approx. 1.47 kHz (Blank/DA) / 2.5 kHz (DA2) Overvoltage protection threshold: 15 – 17 V DC Setup / rise time: ≤ 500 ms, 80 ms @ 115 / 230 VAC (full load) Hold‑up time (typ.): approx. 16 ms @ 115 / 230 VAC (full load) Input voltage range: 90 – 305 V AC / 127 – 431 V DC, 47 – 63 Hz Power factor (typ.): PF > 0.97 @ 115 VAC, PF > 0.95 @ 230 VAC, PF > 0.92 @ 277 VAC (full load) Efficiency (typ.): approx. 86 % AC input current (typ.): 0.8 A @ 115 VAC / 0.4 A @ 230 VAC / 0.32 A @ 277 VAC Inrush current (typ.): cold start, 50 A @ 230 VAC (≈270 μs at 50 % Ipeak) Leakage current: < 0.25 mA @ 277 VAC Overload protection: 108 – 130 % of rated output power, hiccup mode, auto recovery Overvoltage protection: Shut down output voltage, re‑power on to recover Overtemperature protection: Shut down output voltage, re‑power on to recover (DA2: hiccup mode) Short‑circuit protection: Hiccup mode, auto recovery Operating temperature (case Tcase): −40 °C to +85 °C (see “Output load vs temperature” derating) Operating humidity: 20 – 95 % RH, non‑condensing Storage temperature / humidity: −40 °C to +80 °C, 10 – 95 % RH Temperature coefficient: ± 0.03 % / °C (0 – 50 °C) Vibration: 10 – 500 Hz, 5 G, 12 min./cycle, 72 min. along X, Y, Z axes Withstand voltage: 3.75 kVAC (input–output), 1.5 kVAC (input–DA), 1.5 kVAC (output–DA) Isolation resistance: > 100 MΩ @ 500 V DC, 25 °C, 70 % RH Safety standards: UL8750 (type “HL”, except DA), UL879 (12 V, 24 V Blank only), ENEC EN 61347‑1, EN 61347‑2‑13 (independent), EN 62384, BIS IS 15885 (Part 2/Sec 13; 12/24/48 Blank & 12/24‑DA2), EAC TP TC 004, GB19510.1, GB19510.14; IP67; suitable for emergency lighting per EN 61347‑2‑13 Annex J DALI standards (DA/DA2): IEC 62386‑101/102/207/251, Device Type 6 (DT6) EMC emission: EN 55015, EN 61000‑3‑2 Class C (≥60 % load), EN 61000‑3‑3, GB/T 17743, GB17625.1, EAC TP TC 020 EMC immunity: EN 61000‑4‑2,3,4,5,6,8,11; EN 61547 (light industry level, surge Line–Line 2 kV), EAC TP TC 020 MTBF (typ.): 2,626,600 h (Telcordia SR‑332, 25 °C) / 227,100 h (MIL‑HDBK‑217F, 25 °C) Dimensions (L x W x H): 150 mm x 53 mm x 35 mm Weight: approx. 0.49 kg Case & protection: fully encapsulated plastic case, IP67, Class II/2 No‑load power consumption: < 0.5 W Design: 60 W constant‑voltage PWM LED driver, Class 2, LPS Information about the MEAN WELL PWM-60-12 The MEAN WELL PWM‑60‑12 is a 60 W constant‑voltage LED driver with a PWM‑style output, engineered to maintain brightness homogeneity when driving 12 V LED strips and other constant‑voltage LED loads. Its PWM operation at around 1.47 kHz (Blank/DA) or 2.5 kHz (DA2) ensures smooth dimming while preserving color consistency and avoiding visible flicker across the entire dimming range. Featuring typical efficiency around 86 %, active PFC and a wide 90–305 V AC input range, the driver is highly energy‑efficient and suitable for global use. The IP67 fully encapsulated housing, broad −40 to +85 °C case temperature rating and extensive protection set (short‑circuit, overload, overvoltage, overtemperature) make the PWM‑60‑12 robust enough for dry, damp and wet locations, including certain emergency lighting applications under IEC 61347‑2‑13. With its 3‑in‑1 dimming interface (0–10 V, 10 V PWM signal, resistance) on the Blank version and optional DALI/DALI‑2 control (DA/DA2 types), the PWM‑60‑12 offers strong integration flexibility for modern lighting control systems and building automation. Combined with long lifetime ratings and comprehensive international safety and EMC approvals, it is well suited to professional LED strip lighting, indoor LED lighting, decorative installations, architectural lighting and industrial projects that require reliable 12 V constant‑voltage PWM drivers.

Discontinued Product see replacement: HDR-15

Discontinued model See successor: HDR-30