Technical Information & Details for the MEAN WELL TDR-960-24 Power Supply Output Power: 960 W Output Voltage: 24 V DC Output Current: 40 A Input Voltage Range: Three-Phase 340 – 550 VAC (Dual-phase possible) / 480 – 780 VDC Efficiency: up to 94.5 % Ripple & Noise: ≤ 180 mVp-p Inrush Current: 60 A (Cold Start) Power Factor: PF ≥ 0.88 / 400 VAC at full load Operating Temperature: -30 °C to +70 °C Cooling: Free air convection (fanless) Protection Functions: Short circuit, Overload, Over voltage, Over temperature DC OK Signal: Built-in relay contact Isolation Voltage: 3000 V AC between Input and Output Dimensions (W x H x D): 110 mm x 125.2 mm x 150 mm Weight: 2.47 kg Safety & EMC Certificates: UL508, AS/NZS62368.1, EAC, IEC62368-1 CB, EN55032 Installation: DIN Rail TS-35/7.5 or 15 Manufacturer Warranty: 3 Years Information about the MEAN WELL TDR-960-24 The MEAN WELL TDR-960-24 represents a high-performance solution for demanding three-phase industrial environments requiring substantial power in a compact 110mm width design. This 960W unit is engineered with active PFC function compliance and an outstanding efficiency rating of 94.5%, which significantly reduces power dissipation and heat generation within the control cabinet. Its ability to operate under dual-phase conditions provides essential redundancy and flexibility in electrical environments where a phase might be unstable or lost, ensuring that critical industrial processes remain powered and operational without immediate shutdown. Equipped with advanced current sharing capabilities, the TDR-960-24 allows for parallel connection of up to four units to reach a total output of 3840W, making it highly scalable for heavy-duty machinery and large-scale automation systems. The built-in constant current limiting circuit and the DC OK relay contact provide sophisticated monitoring and protection, allowing for seamless integration into PLC-controlled environments. Its robust metal housing and fanless free air convection cooling system ensure long-term reliability and a high MTBF, even when subjected to the heavy industry immunity levels required by modern manufacturing standards.

Technische Eigenschaften des MEAN WELL ELG-150-24A-3Y Leistung: 150W Aluminiumgehäuse Integriertes PFC Standby Ladeverbrauch <0,5W IP65 Ausgangsstrom einstellbar durch internen Potentiometer Mit PE (Varianten ohne 3Y: PE am Gehäuse!) Allgemeine Lebensdauer >50.000Std. 5 Jahre Garantie Produktbeschreibung zur MEAN WELL ELG-150 Serie Bei der MEAN WELL ELG-150 Serie handelt es sich um 150W AC/DC LED Netzteile, die im dualen Modus einen Konstantstrom- und Konstantspannungsausgang unterstützen. Die ELG-150 Netzteile arbeiten mit einem 180~295VAC Eingangsbereich und bieten verschiedene Ausgangsspannungen im Bereich von 12V bis 54V an. Dank des 91% hohem Wirkungsgrads und dem lüfterlosen Design kann die Serie unter freier Luftkonvektion im Temperaturbereich von -40°C bis +90°C betrieben werden. Durch das verwendete Aluminiumgehäuse und den Schutzklassen IP65/67 finden MEAN WELL ELG-150 Netzteile Anwendung sowohl Indoor-, als auch im Outdoorbereich. Die Serie verfügt weiterhin über verschiedene zusätzliche Funktionen, wie 3 in 1 Dimmung, Smart-Timer-Dimmung oder DALI, welche eine hohe Flexibilität in LED Beleuchtungsanwendungen garantieren.

60W AC Dimmbar LED Netzteile 60W Single Output AC Dimmable LED Power Supply

Technical Information & Details for MEAN WELL HLG-80H-24B Power Supply Output Power: 81.6 W Output Voltage: 24 V DC Output Current: 3.4 A Input Voltage Range: 90 – 305 V AC / 127 – 431 V DC, 47 – 63 Hz Efficiency: 90.5 % Ripple & Noise: max. 150 mVp-p Inrush Current: 70 A at 230 V AC Operating Temperature: −40 °C to +80 °C (Case) Cooling: fanless free air convection Protection Functions: Short circuit, Over current, Over voltage, Over temperature Isolation Voltage: 3750 V AC (Input to Output) Dimensions (L x W x H): 195.6 mm x 61.5 mm x 38.8 mm Weight: approx. 840 g Safety & EMC Certificates: UL8750, EN61347-1, IP67, CE, EAC, KC Manufacturer Warranty: 7 Years Information about the MEAN WELL HLG-80H-24B The MEAN WELL HLG-80H-24B is a professional 81.6W AC/DC driver engineered for superior durability in industrial and lighting applications. A primary characteristic of this B-Type model is the versatile 3-in-1 dimming function, supporting output level adjustments via 1–10V DC, 10V PWM signals, or resistance. The unit features a sophisticated dual-mode output design, allowing it to function effectively in both Constant Voltage and Constant Current regions to accommodate various LED configurations. Housed in a fully encapsulated metal casing with an IP67 rating, it is completely protected against dust and water immersion, making it ideal for harsh outdoor environments. Technically, the HLG-80H-24B excels with built-in active Power Factor Correction and a 90.5% efficiency rating, supporting its fanless thermal architecture for silent operation. With a typical life expectancy exceeding 62,000 hours and an industry-leading 7-year manufacturer warranty, it provides exceptional long-term stability for projects such as high-bay lighting, greenhouse systems, and professional LED signage.

Technical Information & Details of the MEAN WELL NDR-480-24 Power Supply Output Power: 480 W Output Voltage: 24 V DC Output Current: 20 A Input Voltage Range: 90 – 264 V AC / 127 – 370 V DC, 47 – 63 Hz Efficiency: up to 92.5 % Ripple & Noise: ≤ 150 mVp-p Inrush Current: max. 60 A @115 VAC / 60 A @230 VAC No-load Power Consumption: < 0.75 W Operating Temperature: −20 °C to +70 °C Cooling: fanless natural convection Protection Features: Short-circuit, Overload, Overvoltage, Overtemperature Overvoltage Category: OVC II Isolation Voltage: 3000 V AC between input and output Dimensions (H x W x D): 125.2 mm x 85.5 mm x 128.5 mm Weight: approx. 1.8 kg Safety & EMC Certificates: CE, UL 508, TUV, CB, EAC LED Indicator: Power On status indicator Manufacturer Warranty: 3 years Information about the MEAN WELL NDR-480-24 The MEAN WELL NDR-480-24 is a high-performance DIN rail power supply with 480 W and stable 24 V DC / 20 A output voltage. It excels with excellent efficiency up to 92.5 %, fanless convection cooling for silent operation, and a powerful aluminum housing design. The comprehensive protection features (short-circuit, overload, overvoltage, and overtemperature protection) with automatic recovery ensure maximum operational safety. Perfect for PLC controls, heavy industrial automation, conveyor systems, and machine building – the universal input voltage range 90–264 V AC enables worldwide deployment. With international certifications, the NDR-480-24 offers maximum energy efficiency, durability, and reliability in demanding industrial environments.

Technical Information & Details for the MEAN WELL SDR-75-24 Power Supply Output Power: 76.8 W Output Voltage: 24 V DC Output Current: 3.2 A Input Voltage Range: 88 – 264 V AC / 124 – 370 V DC, 47 – 63 Hz Efficiency: 90% Ripple & Noise: ≤ 100 mVp-p Inrush Current: 30 A @ 115 VAC / 50 A @ 230 VAC Peak Load Capability: 150% (112.5 W) for up to 3 seconds Operating Temperature: -30 °C to +70 °C Cooling: Free air convection Protection Functions: Short circuit, Overload, Over voltage, Over temperature Voltage Adjustment Range: 24 – 28 V Isolation Voltage: 3000 V AC I/P-O/P Dimensions (H x W x D): 125.2 mm x 32 mm x 102 mm Weight: 510 g Safety & EMC Certificates: UL 508, TUV EN62368-1, CB, EAC, CE LED Display: DC OK indicator Manufacturer Warranty: 3 Years The MEAN WELL SDR-75-24 is a premier choice for industrial automation, distinguished by its ultra-slim 32mm design and superior energy efficiency. A standout feature of this model is its 150% peak power capability, which enables the unit to deliver up to 112.5W for 3 seconds. This unique characteristic is specifically engineered to handle the high start-up currents required by inductive loads such as motors and solenoids, preventing system shutdowns during initial activation. By maintaining a 90% efficiency rating, the power supply minimizes heat generation, allowing for a fanless design that operates silently while extending the overall lifespan of internal components within cramped control cabinets. Beyond its power density, the SDR-75-24 offers a robust industrial immunity level, meeting BS EN/EN61000-6-2 standards for heavy industry environments. It features a versatile DC adjustment range of 24V to 28V, providing flexibility for voltage drops in long cable runs or specific component requirements. The unit is built to withstand harsh conditions, featuring a wide operating temperature range and comprehensive protection mechanisms against short circuits and thermal overloads. With its 3-year manufacturer warranty and global safety approvals including UL 508, this DIN rail power supply is a dependable high-performance solution for PLC systems, sensors, and critical industrial infrastructure.