This PWM LED driver excels with its extremely wide operating range (−40 °C to +80 °C), IP67 waterproofing for outdoor use, and high efficiency up to 88.5 % with low no-load consumption. Unique features include DALI dimming (DT6) with synchronized multi-device control, automatic fault recovery, and superior vibration resistance for enduring performance in smart lighting systems.
The MEAN WELL PWM-120-DA series is a high-performance 120 W PWM output LED driver power supply with waterproof IP67 housing and integrated DALI interface, designed for demanding outdoor and industrial applications. The PWM-120-12DA model delivers stable 12 V DC / 10 A output power with an extremely wide input voltage range of 90–305 V AC. It is ideal for DALI-controlled LED lighting, street lamps, industrial LEDs, and weather-exposed installations, backed by comprehensive certifications and a 5-year manufacturer warranty.
Technical Information & Details of the MEAN WELL PWM-60-12DA2 LED Driver
Output Power: 60 W
Output Voltage: 12 V DC
Output Current: 5 A
Dimming Range: 0 – 100 % (PWM dimming, DALI‑2 control)
PWM Output Frequency: approx. 2.5 kHz (DA2 type, fixed)
Dimming Interface: DALI‑2 primary‑side interface (DA+/DA‑, no polarity), 16 groups and 64 addresses, first step fixed at 0.2 % output
Input Voltage Range: 90 – 305 V AC / 127 – 431 V DC
Input Frequency: 47 – 63 Hz
Power Factor (typ.): > 0.97 @115 VAC, > 0.95 @230 VAC, > 0.92 @277 VAC (full load)
Efficiency (typ.): approx. 86 %
AC Input Current (typ.): 0.8 A @115 VAC / 0.4 A @230 VAC / 0.32 A @277 VAC
Inrush Current (typ.): 50 A @230 VAC (cold start, twidth ≈270 μs, per NEMA 410)
THD: < 20 % (≥60 % load @115 / 230 VAC; ≥75 % load @277 VAC)
No‑load Power Consumption: < 0.5 W
Overload Protection: 108 – 130 % of rated power; DA2 type: hiccup mode, auto recovery (see static characteristic)
Overvoltage Protection: shut down output, re‑power on to recover (typ. 15 – 17 V DC)
Overtemperature Protection: shut down output, re‑power on to recover (DA2 type in hiccup‑like behaviour)
Short‑circuit Protection: hiccup mode, auto recovery
Operating Temperature (case): −40 °C to +85 °C (derating according to “Output load vs. temperature” curve)
Operating Humidity: 20 – 95 % RH, non‑condensing
Storage Temperature / Humidity: −40 °C to +80 °C, 10 – 95 % RH
Temperature Coefficient: ±0.03 % / °C (0 – 50 °C)
Vibration Resistance: 10 – 500 Hz, 5 G, 12 min./cycle, 72 min. along each X, Y, Z axis
Dielectric Strength: 3.75 kVAC (input–output), 1.5 kVAC (input–DA), 1.5 kVAC (output–DA)
Isolation Resistance: > 100 MΩ @500 VDC, 25 °C, 70 % RH
Safety Standards: UL8750 (type “HL”, except DA type), UL879 (12/24 V Blank), ENEC EN 61347‑1, EN 61347‑2‑13 (independent), EN 62384, BIS IS 15885 (12/24/48 V Blank & 12/24‑DA2), EAC, GB19510.1 / GB19510.14; design reference EN 60335‑1; suitable for emergency lighting (EL) according to EN 61347‑2‑13 Annex J
DALI Standards (DA2): IEC 62386‑101, 102, 207, 251, device type DT6 (for DA/DA2 types only)
EMC Emission: EN 55015, EN 61000‑3‑2 Class C (≥60 % load), EN 61000‑3‑3, GB/T 17743, GB17625.1, EAC TP TC 020
EMC Immunity: EN 61000‑4‑2,3,4,5,6,8,11; EN 61547 (light industry level, 2 kV Line‑Line surge), EAC TP TC 020
MTBF (typ.): 2,626,600 h (Telcordia SR‑332, 25 °C) / 227,100 h (MIL‑HDBK‑217F, 25 °C)
Dimensions (L x W x H): 150 mm x 53 mm x 35 mm
Weight: approx. 0.49 kg
Case & Protection: fully encapsulated plastic housing, IP67, Class II, Class 2, LPS
Cooling Method: fanless, free air convection
Information about the MEAN WELL PWM-60-12DA2
The MEAN WELL PWM‑60‑12DA2 is a 60 W constant‑voltage LED driver with a 12 V DC output and high‑frequency 2.5 kHz PWM dimming, engineered for DALI‑2 controlled 12 V LED strip and low‑voltage lighting systems. The constant‑voltage PWM output allows connected LED strips to retain consistent brightness and colour quality across the entire dimming range, while the higher PWM frequency of the DA2 version helps to minimise visible flicker in sensitive applications.
Its strengths include a robust electrical design with active power factor correction, a wide 90–305 V AC input range and a fully potted IP67 enclosure that supports use in dry, damp and wet environments. The wide case temperature range from −40 °C to +85 °C, together with overload, overvoltage, overtemperature and short‑circuit protection in hiccup or shutdown modes, makes the PWM‑60‑12DA2 suitable for long‑life installations in commercial, architectural and industrial lighting.
A key unique characteristic of the PWM‑60‑12DA2 is its native DALI‑2 interface (DT6), which enables addressable, groupable and scene‑based dimming in modern building and lighting management systems, while still providing a pure PWM output towards the LEDs. Combined with its long MTBF and comprehensive safety and EMC approvals, this model is a strong fit for centralised 12 V LED strip lighting, cove and accent lighting and control‑intensive projects where DALI‑2 compliance and high‑quality dimming behaviour are essential.