SS-9V24

Technical Information & Details about the MEAN WELL HDR-100-24N Power Supply Output Power: 100.8 W Output Voltage: 24 V DC (nominal) Output Current: 4.2 A Current Range: 0 – 4.2 A Input Voltage Range: 85 – 264 V AC (277 V AC operational) / 120 – 370 V DC (390 V DC operational), 47 – 63 Hz Efficiency: typ. 90 % Ripple & Noise: ≤ 150 mVp-p Output Voltage Adjustment Range: 21.6 – 29 V DC (extended Non‑LPS range) Voltage Tolerance: ±2.0 % Line Regulation: ±1.0 % Load Regulation: ±1.0 % Setup, Rise Time: 500 ms, 60 ms @230 V AC / 115 V AC (full load) Hold-up Time: 30 ms @230 V AC / 12 ms @115 V AC (full load) AC Input Current (typ.): 3 A @115 V AC / 1.6 A @230 V AC Inrush Current: 35 A @115 V AC / 70 A @230 V AC (cold start) No-load Power Consumption: < 0.3 W Operating Temperature: −30 °C to +70 °C (with derating according to curve) Operating Humidity: 20 – 90 % RH, non‑condensing Storage Conditions: −40 °C to +85 °C, 10 – 95 % RH, non‑condensing Cooling: fanless free air convection Protection Features: short circuit (hiccup mode, auto recovery), overload (constant current limiting within 50–100 % of rated output voltage, auto recovery), overvoltage (shut down, re‑power to recover) Overvoltage Protection Threshold: 30 – 36 V DC Overvoltage Category: OVC III (up to 2000 m altitude) Isolation Voltage: 4000 V AC between input and output Isolation Resistance: ≥ 100 MΩ @ 500 V DC, 25 °C, 70 % RH Dimensions (W x H x D): 70 mm x 90 mm x 54.5 mm Weight: approx. 270 g Housing Material: insulating plastic housing, Class II, ultra‑slim 4‑SU step‑shape Mounting: DIN rail TS35/7.5 or TS35/15 Vibration Resistance: 10 – 500 Hz, 2 G, 60 min per axis (X, Y, Z) Safety & EMC Certificates: UL 62368‑1, UL 508, TUV BS EN/EN 61558‑2‑16, BS EN/EN 61558‑1, IEC 62368‑1, EAC TP TC 004, BSMI CNS15598‑1, BIS IS13252, compliant with BS EN/EN 55032, BS EN/EN 55035, BS EN/EN 61000‑6‑2, BS EN/EN 61204‑3 LPS Classification: Non‑LPS (extended adjustment range, higher usable output power up to 100.8 W) LED Indicator: Power‑On status LED Manufacturer Warranty: 3 years About the MEAN WELL HDR-100-24N The MEAN WELL HDR-100-24N is the Non‑LPS version of the HDR‑100‑24 models and delivers up to 100.8 W at 24 V DC and 4.2 A in an ultra‑slim 70 mm DIN‑rail housing. Its extended 21.6–29 V adjustment range offers additional voltage headroom for long cable runs, inductive loads and demanding 24 V control circuits, going well beyond the tighter LPS‑compliant window of “blank” units. Combined with universal input, high efficiency, fanless free air convection, comprehensive protection features and broad safety/EMC approvals, HDR-100-24N is a powerful, flexible 24 V supply for industrial control systems, building automation, valves, relays, sensors and OEM applications that must fully utilize the 100 W class.

Technical Information & Details about the MEAN WELL HDR-60-24 Power Supply Output Power: 60 W Output Voltage: 24 V DC Output Current: 2,5 A Current Range: 0 – 2,5 A Input Voltage Range: 85 – 264 V AC (277 V AC operational) / 120 – 370 V DC (390 V DC operational), 47 – 63 Hz Efficiency: up to 90 % Ripple & Noise: ≤ 150 mVp-p Output Voltage Adjustment Range: 21,6 – 29 V DC Voltage Tolerance: ±1,0 % Line Regulation: ±1,0 % Load Regulation: ±1,0 % Setup, Rise Time: 500 ms, 50 ms @230 V AC / 115 V AC (full load) Hold-up Time: 30 ms @230 V AC / 12 ms @115 V AC (full load) Inrush Current: 30 A @115 V AC / 60 A @230 V AC (cold start) No-load Power Consumption: < 0.3 W Operating Temperature: −30 °C to +70 °C (with derating according to curve) Cooling: fanless free air convection Protection Functions: short circuit (hiccup mode, auto recovery), overload (constant current limiting within 50–100 % of rated output voltage, auto recovery), overvoltage (shut down, re‑power to recover) Overvoltage Category: OVC III (up to 2000 m altitude) Isolation Voltage: 4000 V AC between input and output Isolation Resistance: ≥ 100 MΩ @ 500 V DC, 25 °C, 70 % RH Dimensions (W x H x D): 52,5 mm x 90 mm x 54,5 mm Weight: approx. 190 g Housing Material: insulating plastic housing, Class II, ultra slim step-shape Mounting: DIN rail TS35/7,5 or TS35/15 Safety & EMC Certifications: IEC 62368-1, UL 62368-1, UL 508, TUV BS EN/EN 61558-2-16, BS EN/EN 61558-1, EAC, BSMI, BIS IS13252, compliant with BS EN/EN 55032, BS EN/EN 55035, BS EN/EN 61000-6-2, BS EN/EN 61204-3 LED Indicator: Power On LED indicator Manufacturer Warranty: 3 years About the MEAN WELL HDR-60-24 The MEAN WELL HDR-60-24 is a 60 W ultra slim DIN-rail power supply that delivers a regulated 24 V DC / 2,5 A output in a compact 52.5 mm wide step-shape housing, ideal for space-constrained distribution boards and control cabinets. Its wide universal input range of 85–264 V AC or 120–370 V DC and high efficiency up to 90 % support energy-efficient operation in building automation, home control, and industrial control systems that rely on a stable 24 V bus. The adjustable 21,6–29 V output range allows precise tuning of the 24 V rail to compensate for voltage drops and to reliably power PLCs, sensors, relays, and I/O modules. The Class II plastic enclosure with reinforced insulation increases electrical safety and removes the need for a protective earth connection, simplifying installation and panel design. With fanless free air convection, very low no-load power consumption below 0.3 W, a wide operating temperature range from −30 °C to +70 °C, and comprehensive protection and certification features, the HDR-60-24 provides a robust, long-life 24 V power solution for demanding household and industrial automation applications.

Technical Information & Details about the MEAN WELL HDR-60-12 Power Supply Output Power: 60 W Output Voltage: 12 V DC Output Current: 4,5 A Current Range: 0 – 4,5 A Input Voltage Range: 85 – 264 V AC (277 V AC operational) / 120 – 370 V DC (390 V DC operational), 47 – 63 Hz Efficiency: up to 88 % Ripple & Noise: ≤ 120 mVp-p Output Voltage Adjustment Range: 10,8 – 13,8 V DC Voltage Tolerance: ±1,0 % Line Regulation: ±1,0 % Load Regulation: ±1,0 % Setup, Rise Time: 500 ms, 50 ms @230 V AC / 115 V AC (full load) Hold-up Time: 30 ms @230 V AC / 12 ms @115 V AC (full load) Inrush Current: 30 A @115 V AC / 60 A @230 V AC (cold start) No-load Power Consumption: < 0.3 W Operating Temperature: −30 °C to +70 °C (with derating according to curve) Cooling: fanless free air convection Protection Functions: short circuit (hiccup mode, auto recovery), overload (constant current limiting 50–100 % of rated output voltage, auto recovery), overvoltage (shut down, re‑power to recover) Overvoltage Category: OVC III (up to 2000 m altitude) Isolation Voltage: 4000 V AC between input and output Isolation Resistance: ≥ 100 MΩ @ 500 V DC, 25 °C, 70 % RH Dimensions (W x H x D): 52,5 mm x 90 mm x 54,5 mm Weight: approx. 190 g Housing Material: insulating plastic, Class II, ultra-slim step-shape Mounting: DIN rail TS35/7,5 or TS35/15 Safety & EMC Certifications: IEC 62368-1, UL 62368-1, UL 508, TUV BS EN/EN 61558-2-16, BS EN/EN 61558-1, EAC TP TC 004, BSMI, BIS IS13252, compliant with BS EN/EN 55032, BS EN/EN 55035, BS EN/EN 61000-6-2, BS EN/EN 61204-3 LED Indicator: Power On LED indicator Manufacturer Warranty: 3 years About the MEAN WELL HDR-60-12 The MEAN WELL HDR-60-12 is a 60 W ultra-slim DIN-rail power supply that delivers a robust 12 V DC / 4,5 A output in a compact 52,5 mm wide step-shape housing, ideal for space-constrained distribution boards and industrial control cabinets. Its wide 85–264 V AC / 120–370 V DC input range and high efficiency up to 88 % support energy-efficient operation in building automation, home automation, and industrial control environments. The adjustable 10,8–13,8 V output range allows precise tuning of the 12 V bus to compensate for line voltage drops, ensuring reliable supply for relays, actuators, sensors, and control electronics. The Class II plastic enclosure provides reinforced insulation and eliminates the need for a protective earth connection, which improves electrical safety and simplifies installation. With fanless free air convection, low no-load power consumption below 0.3 W, a wide operating temperature range from −30 °C to +70 °C, and comprehensive protection and certification features, the HDR-60-12 is a durable, low-maintenance 12 V power solution for demanding household and industrial automation projects.

Technical Information & Details about the MEAN WELL HDR-100-12N Power Supply Output Power: 90 W Output Voltage: 12 V DC (nominal) Output Current: 7.5 A Current Range: 0 – 7.5 A Input Voltage Range: 85 – 264 V AC (277 V AC operational) / 120 – 370 V DC (390 V DC operational), 47 – 63 Hz Efficiency: typ. 88 % Ripple & Noise: ≤ 120 mVp-p Output Voltage Adjustment Range: 12 – 13.8 V DC (extended Non‑LPS range) Voltage Tolerance: ±2.0 % Line Regulation: ±1.0 % Load Regulation: ±1.0 % Setup, Rise Time: 500 ms, 60 ms @230 V AC / 115 V AC (full load) Hold-up Time: 30 ms @230 V AC / 12 ms @115 V AC (full load) AC Input Current (typ.): 3 A @115 V AC / 1.6 A @230 V AC Inrush Current: 35 A @115 V AC / 70 A @230 V AC (cold start) No-load Power Consumption: < 0.3 W Operating Temperature: −30 °C to +70 °C (with derating according to curve) Operating Humidity: 20 – 90 % RH, non‑condensing Storage Conditions: −40 °C to +85 °C, 10 – 95 % RH, non‑condensing Cooling: fanless free air convection Protection Features: short circuit (hiccup mode, auto recovery), overload (constant current limiting within 50–100 % of rated output voltage, auto recovery), overvoltage (shut down, re‑power to recover) Overvoltage Protection Threshold: 14.2 – 16.2 V DC Overvoltage Category: OVC III (up to 2000 m altitude) Isolation Voltage: 4000 V AC between input and output Isolation Resistance: ≥ 100 MΩ @ 500 V DC, 25 °C, 70 % RH Dimensions (W x H x D): 70 mm x 90 mm x 54.5 mm Weight: approx. 270 g Housing Material: insulating plastic housing, Class II, ultra‑slim 4‑SU step‑shape Mounting: DIN rail TS35/7.5 or TS35/15 Vibration Resistance: 10 – 500 Hz, 2 G, 60 min per axis (X, Y, Z) Safety & EMC Certificates: UL 62368‑1, UL 508, TUV BS EN/EN 61558‑2‑16, BS EN/EN 61558‑1, IEC 62368‑1, EAC TP TC 004, BSMI CNS15598‑1, BIS IS13252, compliant with BS EN/EN 55032, BS EN/EN 55035, BS EN/EN 61000‑6‑2, BS EN/EN 61204‑3 LPS Classification: Non‑LPS (extended adjustment range, higher usable output power up to 90 W) LED Indicator: Power‑On status LED Manufacturer Warranty: 3 years About the MEAN WELL HDR-100-12N The MEAN WELL HDR-100-12N is the higher‑power Non‑LPS variant of the HDR‑100 series, providing up to 90 W at 12 V DC and 7.5 A in an ultra‑slim 70 mm DIN‑rail housing. Its extended 12–13.8 V adjustment range offers extra voltage headroom for line drop compensation and demanding loads, giving more flexibility than LPS‑compliant “blank” models. With universal input, high efficiency, fanless free air convection, comprehensive protection features and broad international approvals, HDR-100-12N is a robust 12 V power source for automation, building control, industrial I/O and OEM designs that need to exploit the full capability of the 100 W class.

Technical Information & Details on MEAN WELL PWM-120-12DA Power Supply Output Power: 120 W Output Voltage: 12 V DC Output Current: 10 A Input Voltage Range: 90 – 305 V AC / 127 – 431 V DC, 47 – 63 Hz Efficiency: up to 88.5 % PWM Frequency: 1.47 kHz Inrush Current: typ. 60 A / 50 µs @ 230 VAC No-Load Power Consumption: < 0.5 W (Standby < 0.5 W) Operating Temperature: −40 °C to +80 °C Cooling: natural convection Protection Functions: Short circuit (Hiccup mode), Overload, Overvoltage, Over temperature Overvoltage Category: II Isolation Voltage: 3.75 kV AC between input and output; IP-DA 1.5 kV AC Dimensions (L x W x H): 191 mm x 63 mm x 37.5 mm Weight: approx. 0.97 kg Safety & EMC Certifications: UL8750 (exc. 12DA), ENEC EN61347-1/-2-13, EAC, CB, IP67, DALI Standards IEC62386-101/102/207/251 (DT6) Dimming: DALI (up to 16 groups / 64 addresses) MTBF: > 2243.7k hours (Telcordia SR-332) Manufacturer Warranty: 5 years Information on MEAN WELL PWM-120-12DA This PWM LED driver excels with its extremely wide operating range (−40 °C to +80 °C), IP67 waterproofing for outdoor use, and high efficiency up to 88.5 % with low no-load consumption. Unique features include DALI dimming (DT6) with synchronized multi-device control, automatic fault recovery, and superior vibration resistance for enduring performance in smart lighting systems. The MEAN WELL PWM-120-DA series is a high-performance 120 W PWM output LED driver power supply with waterproof IP67 housing and integrated DALI interface, designed for demanding outdoor and industrial applications. The PWM-120-12DA model delivers stable 12 V DC / 10 A output power with an extremely wide input voltage range of 90–305 V AC. It is ideal for DALI-controlled LED lighting, street lamps, industrial LEDs, and weather-exposed installations, backed by comprehensive certifications and a 5-year manufacturer warranty.

60W AC Dimmbar LED Netzteile 60W Single Output AC Dimmable LED Power Supply