Technical Information & Details for MEAN WELL ELG-150-24A LED Driver Output Power: 150 W (at 200 – 305 V AC) / 105 W (at 100 – 180 V AC) Output Voltage: 24 V DC (Constant current region: 12 – 24 V) Rated Current: 6.25 A Voltage Adjustment Range: 21.6 – 26.4 V (via internal potentiometer) Current Adjustment Range: 3.2 – 6.25 A (via internal potentiometer) Ripple & Noise (max.): ≤ 200 mVp-p Voltage Tolerance: ±2.0% Input Voltage Range: 100 – 305 V AC / 142 – 431 V DC Efficiency (Typ.): 88.5% Power Factor (PF): PF ≥ 0.97 at 115 V AC / PF ≥ 0.95 at 230 V AC / PF ≥ 0.92 at 277 V AC (at full load) Ingress Protection: IP65 (suitable for indoor and outdoor installations) Operating Temperature: Tcase −40 °C to +90 °C (max. case temperature +90 °C) Cooling: Fanless free air convection Protections: Over current (95 – 108%, constant current limiting), Short circuit (hiccup mode), Over voltage (28 – 34 V), Over temperature Form Factor / Housing: Metal housing design with functional Ground (Class I) Dimensions (L x W x H): 219 mm x 63 mm x 35.5 mm Weight: Approx. 0.95 kg Manufacturer Warranty: 5 Years Information about MEAN WELL ELG-150-24A The MEAN WELL ELG-150-24A is a high-performance 150W AC/DC LED power supply featuring dual mode constant voltage and constant current output. Housed in a durable metal casing, it accepts a wide input voltage range of 100 to 305 V AC and provides a 24 V DC output with a rated current of up to 6.25 A (150 W output at 200–305 V AC). As an A-Type model, it features an IP65 rating and built-in potentiometers for adjusting both output voltage (21.6 to 26.4 V) and current (3.2 to 6.25 A). Designed with fanless free air convection cooling, it operates efficiently across case temperatures ranging from −40 °C to +90 °C, making it suitable for indoor and outdoor installations such as LED street lighting, architectural lighting, and floodlighting. Equipped with active PFC, built-in protection circuitry, and a lifetime expectancy exceeding 50,000 hours, it is backed by a 5-year manufacturer warranty.

Technical Information & Details about the MEAN WELL LPV-100-24 Power Supply Rated output power: 100.8 W DC output voltage: 24 V DC Rated output current: 4.2 A Current range: 0 – 4.2 A Input voltage range: 90 – 264 V AC (127 – 370 V DC), 47 – 63 Hz Efficiency (typical): about 88 % Ripple & noise (max.): ≤ 150 mVp-p Output voltage range (O.V.P. region): 27.6 – 32.4 V DC Voltage tolerance: ±5.0 % Line regulation: ±2.0 % Load regulation: ±5.0 % Setup, rise time: 2000 ms, 25 ms at 230 V AC / 115 V AC (first cold start) Hold-up time (typ.): 50 ms at 230 V AC / 14 ms at 115 V AC (full load) AC input current (typ.): 2.2 A at 115 V AC / 1.2 A at 230 V AC Inrush current (typ.): 75 A at 230 V AC (cold start, twidth ≈ 700 μs) Leakage current: < 0.25 mA at 240 V AC Overload protection: 110 – 150 % of rated output power, hiccup mode, auto recovery after fault removal Overvoltage protection: shut down output voltage at 27.6 – 32.4 V, re‑power on to recover Operating temperature: −25 °C to +70 °C (derating required, see curve) Operating humidity: 20 – 90 % RH, non‑condensing Storage conditions: −40 °C to +80 °C, 10 – 95 % RH Cooling method: free air convection (fanless) Withstand voltage: 3000 V AC between input and output Isolation resistance: > 100 MΩ at 500 V DC, 25 °C, 70 % RH Ingress protection rating: IP67, fully encapsulated plastic case Dimensions (L x W x H): 190 mm x 52 mm x 37 mm Weight: approx. 610 g Vibration resistance: 10 – 500 Hz, 2 G, 60 min per axis (X, Y, Z) EMC emission: BS EN/EN 55032 Class B, BS EN/EN 61000‑3‑2 Class A (≤80 % load), BS EN/EN 61000‑3‑3 EMC immunity: BS EN/EN 61000‑4‑2,‑3,‑4,‑5,‑6,‑8,‑11; BS EN/EN 55035 Safety approvals: UL 8750, CSA C22.2 No. 250.13‑12, UL 879, CSA C22.2 No. 207‑M89, BIS IS 15885, IEC/BS EN/EN 62368‑1, EAC Case design: fully isolated, encapsulated plastic case for damp and dusty environments MTBF (typical): 4,497,100 h (Telcordia SR‑332, 25 °C) Manufacturer warranty: 2 years About the MEAN WELL LPV-100-24 The MEAN WELL LPV-100-24 is a 100 W class constant‑voltage switching power supply that provides a regulated 24 V DC output at up to 4.2 A, fully encapsulated in an IP67 plastic housing for reliable use in harsh environments. Its universal AC input range, high efficiency, short‑circuit, overload and overvoltage protection, and fanless free air convection make it suitable for indoor and sheltered outdoor applications. With compact dimensions, strong isolation and broad safety and EMC approvals, LPV-100-24 is a robust 24 V source for LED strips, signage, control systems and other low‑voltage equipment that require a rugged, dust‑ and splash‑proof power supply.

Technical Information & Details for MEAN WELL ELG-100-24A Power Supply Output Power: 96 W (at 200–305 V AC) / 70 W (at 100–180 V AC) Output Voltage: 24 V DC (adjustable 21.6–26.4 V) Output Current: 4.0 A (adjustable 2.0–4.0 A) Input Voltage Range: 100 – 305 V AC / 142 – 431 V DC, 47 – 63 Hz Efficiency: Up to 88% Ripple & Noise: ≤ 200 mVp-p Inrush Current: COLD START 60 A @ 230 V AC No Load / Standby Power: < 0.5 W Operating Temperature: −40 °C to +90 °C (Case temperature Tcase) Cooling: Fanless free air convection Protections: Short circuit (Hiccup mode), Overload (Constant current limiting), Over voltage, Over temperature Isolation Voltage: 3750 V AC between Input and Output Adjustment Capability: Internal potentiometers for voltage and current levels (Io & Vo) Ingress Protection / Housing: IP65, Metal housing Dimensions (L x W x H): 199 mm x 63 mm x 35.5 mm Weight: approx. 850 g Safety & EMC Standards: UL8750 (Type HL), EN61347-1, EN61347-2-13, EN55015, EAC, CB, CE AC Input Connection: Standard 2-wire AC input cable Warranty: 5 Years Information about MEAN WELL ELG-100-24A Direct manual fine-tuning of electrical output parameters is rendered straightforward on the MEAN WELL ELG-100-24A via accessible **internal potentiometers (Io & Vo)**. Encased inside a durable **IP65** rated metal shell, internal components are reliably protected from environmental moisture and particulate buildup. The driver utilizes passive thermal convection rather than noisy cooling fans, ensuring completely silent operation across case operating temperatures spanning **-40 °C to +90 °C**. Fully compliant with **UL8750 (Type HL)** requirements for Class I, Division 2 hazardous locations, the product is covered by a **5 years** manufacturer warranty.

Technical Information & Details for MEAN WELL ELG-200-24DA Power Supply Output Power: 199.68 W (at 200–305 VAC) / 149.76 W (at 100–180 VAC) Output Voltage: 24 V DC Output Current: 8.4 A Input Voltage Range: 100 – 305 V AC / 142 – 431 V DC, 47 – 63 Hz Efficiency: 92% Ripple & Noise: ≤ 200 mVp-p Inrush Current: 60 A at 230 VAC (Cold Start) Standby Power Consumption: < 0.5 W Operating Temperature: −40 °C to +90 °C (Case Temperature Tcase) Cooling: Fanless Free Air Convection Protections: Over Current, Short Circuit, Over Voltage, Over Temperature Overvoltage Category: OVC III (Design Compliance) Isolation Voltage: 3750 V AC Input to Output Dimensions (L x W x H): 244 mm x 71 mm x 37.5 mm Weight: approx. 1.22 kg Safety & EMC Certificates: UL8750 (Type HL), EN61347-1, EN61347-2-13, BIS IS15885, EAC, CE Ingress Protection / Housing: IP67 Metal Housing Warranty: 5 Years Information about MEAN WELL ELG-200-24DA Direct integration into advanced smart lighting networks is seamless with the MEAN WELL ELG-200-24DA driver, featuring native DALI protocol support (IEC 62386) for precise individual lighting control across Constant Voltage and Constant Current output modes. Standardized with a fully potted IP67-rated metal housing to ensure maximum environmental defense against dust and water ingress, it performs dependably through a −40 °C to +90 °C case temperature operating range. Engineered with rugged 5G vibration resistance, this 24V DALI power supply is ideal for intelligent outdoor floodlights, commercial high-bay setups, and Class I, Division 2 hazardous locations backed by UL8750 Type HL certification and a full 5-year warranty.

Technical Information & Details of the MEAN WELL LPV-60-24 Power Supply Not approved as an LED driver within the EU! An approved alternative is, for example, the LPF-60 series. Output Power: 60 W Output Voltage: 24 V DC Output Current: 2.5 A Input Voltage Range: 90 – 264 V AC / 127 – 370 V DC, 47 – 63 Hz Efficiency: up to 86 % Ripple & Noise: ≤ 150 mVp-p Inrush Current: max. 60 A @230 VAC No-load Power Consumption: < 0.5 W Operating Temperature: −30 °C to +70 °C Cooling: fanless natural convection Protection Features: Short-circuit, Overload, Overvoltage Overvoltage Category: OVC III Isolation Voltage: 3000 V AC between input and output Dimensions (H x W x D): 32 mm x 42.5 mm x 162.5 mm Weight: approx. 420 g Safety & EMC Certificates: CE, UL1310, TUV, CB, EAC, IP67 LED Indicator: - Manufacturer Warranty: 2 years Information about the MEAN WELL LPV-60-24 The MEAN WELL LPV-60-24 is a powerful LED power supply with 60 W and stable 24 V DC / 2.5 A output voltage. It excels with excellent efficiency up to 86 %, fanless convection cooling for silent operation, and a fully waterproof IP67 housing. The comprehensive protection features (short-circuit, overload, and overvoltage protection) with automatic recovery ensure maximum operational safety. Perfect for LED strips, modules, outdoor lighting, and humid environments – the universal input voltage range 90–264 V AC enables worldwide deployment. With international certifications, the LPV-60-24 offers maximum flexibility, durability, and weatherproof protection in demanding environments.

Technical Information & Details for the MEAN WELL ELG-240-24A Power Supply Rated Power: 239.82 W Output Voltage: 24 V DC Output Current: 9.99 A (Constant Current Region 12–24 V) Input Voltage Range: 100 – 305 V AC / 142 – 431 V DC, 47 – 63 Hz Efficiency: Up to 93% Ripple & Noise: ≤ 350 mVp-p Inrush Current: Cold start 60 A at 230 V AC No-Load Power Consumption: < 0.5 W Operating Temperature: Case temperature (Tcase) from −40 °C to +90 °C Cooling: Fanless free air convection Protection Functions: Short circuit, Overload, Overvoltage, Overtemperature Ingress Protection: IP65 rated for indoor and outdoor installations Withstand Voltage: I/O-FG: 2.0 kV AC, I/O-O/P: 3.75 kV AC Dimensions (L x W x H): 244 mm × 71 mm × 37.5 mm Weight: Approx. 1.22 kg Safety & EMC Standards: UL8750 (Type HL), CSA, IEC/EN 61347, CE, EAC Control Feature: Built-in potentiometer for manual voltage and current adjustment Manufacturer Warranty: 5 years Information Regarding the MEAN WELL ELG-240-24A Engineered for high-performance industrial and outdoor lighting environments, the MEAN WELL ELG-240-24A delivers exceptional reliability and power delivery under demanding operational conditions. Housed in a durable metallic structure featuring an IP65 rating, this driver is fully protected against dust ingress and water jets, making it an ideal choice for exterior architectural setups, street lighting, and heavy-duty industrial floors. Its sophisticated dual-mode constant voltage and constant current operation enables versatile integration across complex system architectures without requiring external converter modules. At the core of this 240W unit lies an advanced topology achieving a high working efficiency of up to 93%, which significantly curtails thermal dissipation and energy waste. Supporting a wide universal input range from 100 to 305V AC, the unit seamlessly accommodates global utility grids and protects against voltage fluctuations. A standout structural asset is its robust thermal performance, supporting a wide case temperature range (Tcase) of −40 °C to +90 °C powered entirely by natural convection cooling without the risk of mechanical fan failures. Designed for field flexibility, the A-type variant includes a built-in, accessible potentiometer that empowers technicians to fine-tune both output voltage and constant current thresholds manually. Comprehensive electronic safeguards protect against abnormal states such as short circuits, overloads, overvoltages, and overtemperatures with automatic fault recovery. Backed by a comprehensive 5-year manufacturer warranty, this power supply minimizes maintenance overhead and secures long-term operational continuity. Complying with rigorous international certifications, including UL8750 Type HL for use in Class I, Division 2 hazardous locations, the device meets elite safety benchmarks. Combining high surge immunity, superior galvanic isolation, and a projected lifetime exceeding 50,000 hours, the MEAN WELL ELG-240-24A represents a dependable engineering choice for professional commercial deployments.