IDLC-45-350DA End of Life

Discontinued Product see replacement LCM-25DA2

Technical Information & Details for the MEAN WELL ELG-75-C350DA-3Y Power Supply Rated Power: 74.55 W Output Voltage: 107 – 214 V DC Output Current: 350 mA Input Voltage Range: 100 – 305 V AC / 142 – 431 V DC, 47 – 63 Hz Efficiency: up to 90 % Power Factor (PF): PF ≥ 0.97 @ 115 V AC / PF ≥ 0.95 @ 230 V AC Inrush Current: max. 50 A @ 230 V AC Standby Power Consumption: < 0.5 W Operating Temperature: −40 °C to +85 °C (Tcase) Cooling: Fanless free air convection Protections: Short circuit, overload, overvoltage, overtemperature IP Rating & Design: IP67 metal housing with functional ground Isolation Voltage: 3750 V AC between input and output Dimensions (L x W x H): 180 mm x 63 mm x 35.5 mm Weight: approx. 800 g Safety & EMC Standards: UL8750 (Type HL), EN61347, EAC, CE, CB Dimming Control: DALI control technology (IEC 62386) Warranty: 5 years Information about the MEAN WELL ELG-75-C350DA-3Y Engineered to deliver high-efficiency performance for demanding LED lighting networks, the MEAN WELL ELG-75-C350DA-3Y provides a regulated constant current output of 350 mA with up to 74.55 watts of total power. System designers frequently specify this precise configuration for rugged installations due to its heavy-duty IP67 rating for dust and water resistance, which enables reliable long-term operation in challenging outdoor environments. Thermal endurance in high-ambient conditions is assured by the expanded Tcase −40 °C to +85 °C operating temperature limits, preventing premature failure during severe seasonal weather changes. Intelligent lighting integration is fully supported by the onboard DALI control technology interface, facilitating accurate digital dimming protocols and addressable group management across commercial networks. Furthermore, the unit complies with strict UL8750 Type HL safety standards for Class I Division 2 hazardous locations and includes a robust 5 years warranty coverage that minimizes long-term operational risk. Utilizing a durable metal enclosure with a 3-wire input configuration (3Y), the fanless construction relies entirely on natural air convection to deliver continuous full-load output quietly while achieving efficiency ratings up to 90 percent. An integrated active PFC stage guarantees superior power factor correction, while advanced internal design keeps standby power consumption under 0.5 watts during idle states. Comprehensive protection mechanisms—including automatic hiccup-mode recovery for short circuits and shutdown protection for overvoltage or overtemperature events—safeguard connected luminaire arrays against unexpected line disturbances. Featuring high transient surge immunity up to 6 kV, this driver represents an exceptionally stable solution for street lights, bay lighting, and horticultural applications.

Discontinued Product see replacement: LCM-40DA2

Technische Eigenschaften des MEAN WELL APC-8-700 Nennleistung: 7,7 W Eingangsbereich: 90 bis 264VAC  Ausgangsstrom: 700 mA Kompakte Bauform Class II Schaltnetzteil Schutzart IP42 Kühlung durch freie Luftkonvektion Schutz vor Kurzschluss UL8750, EN55032, EN61000-3-2,  EN61000-3-3 Informationen zum MEAN WELL APC-8-700 Mit dem Modell APC-8-700 präsentiert Mean Well ein leistungsfähiges LED-Netzteil in kompakter und geschlossener Bauform für vielfältige LED-Anwendungen wie z. B. dekorative LED-Leuchten und LED-Reklameschilder. Es verfügt über einen weltweit einsetzbaren Weitbereichseingang von 90 bis 264 VAC mit Derating bei 90 - 100 VAC und liefert zudem eine zuverlässige Nennleistung von 7,7 W bei einem Konstantstrom von 700 mA. Als zertifizierte Class II Netzgeräte mit dem Kunststoffgehäuse nach der Schutzart IP42 können die Mean Well APC-8-Modelle in verschiedensten Arbeitsumgebungen installiert werden. Die lüfterlose Produktserie von MeanWell  ist weiterhin durch freie Luftkonvektion gekühlt, welche für einen energieeffizienten und ruhigen Betrieb sorgen kann. Dabei erzielt die APC-8-Serie einen Wirkungsgrad über 80%. Die kurzschlussfeste Mean Well APC-8-Modelle erfüllen nicht zuletzt alle grundlegenden Sicherheits- und Störfestigkeitsstandards gemäß UL8750, EN55032, EN61000-3-2,  EN61000-3-3 sowie weitere Anforderungen für die zuverlässige Stromversorgung von LED-Schaltnetzteilen. Ausgezeichnet durch die hohe Zuverlässigkeit sowie die herausragende Kosteneffizienz ist die Produktreihe die optimale Lösung für LED-Beleuchtungen mit kleiner Leistung. Nur für den Einbau in Geräten, die einen anderen Primärgebrauch aufweisen als die Beleuchtung, z. B.Kopiergeräte, Overhead- und Diaprojektoren oder für Skalen- und Anzeigebeleuchtung

Technical Information & Details for the MEAN WELL PCD-16-700B Power Supply Output Power: 16.8 W Output Voltage: 16–24 V DC Output Current: 700 mA Constant Current Input Voltage Range: 180 – 295 V AC Efficiency: up to 80.5 % Operating Temperature: −30 °C to +60 °C Protection Rating: IP42 Dimming Compatibility: Leading edge & trailing edge AC phase-cut (TRIAC) Withstand Voltage: 3.75 kV AC (I/P-O/P) Safety & EMC Certificates: UL8750, ENEC, BIS IS15885, CE Manufacturer Warranty: 3 years Information about the MEAN WELL PCD-16-700B Delivering precision constant current output for demanding lighting fixtures, this specialized LED driver is engineered for optimal performance in fixed installations. System builders frequently select this model for its native compatibility with leading edge and trailing edge AC phase-cut (TRIAC) dimming controls, enabling smooth illumination adjustments. Thermal durability is further assured by a wide operational temperature range spanning from −30 °C to +60 °C, supporting reliable functionality in diverse environments. Encased in a fully isolated plastic housing adhering to an IP42 ingress protection rating, the unit effectively shields internal circuitry from dust and moisture exposure. Its streamlined physical dimensions allow seamless integration inside tight junction boxes, ceiling voids, or custom luminaire compartments without restricting airflow. Built-in electronic safeguards, featuring automatic-recovery short-circuit and over-temperature protections, safeguard connected LED modules against electrical faults. Electrical isolation safety is reinforced by a robust dielectric withstand voltage rating of 3.75 kV AC between input and output to prevent high-voltage feedback. Additionally, the integrated active power factor correction (PFC) circuitry enhances electrical grid efficiency while minimizing harmonic distortion during full-load execution. Compliance with stringent global standards such as UL8750 and ENEC validates its readiness for professional commercial deployment. Backed by a comprehensive 3 years manufacturer warranty, this power unit delivers long-term operational confidence for mission-critical lighting setups. Whether driving linear architectural arrays or decorative fixtures, the device maintains exceptional stability and consistent output efficiency. Rigorous factory burn-in testing protocols ensure flawless reliability right out of the box.

Technical Information & Details for the MEAN WELL PCD-25-700B Power Supply Rated Power: 25.2 W Output Voltage: 24 – 36 V DC Rated Current: 700 mA Input Voltage Range: 180 – 295 V AC, 47 – 63 Hz Efficiency: up to 81 % Ripple & Noise: ≤ 2.2 Vp-p Inrush Current: Cold start 10 A at 230 VAC No Load Power Consumption: Not applicable (Constant current design) Working Temperature: −30 °C to +60 °C Cooling: Fanless free air convection Protection Functions: Short circuit, over temperature Overvoltage Category: Class II (no protective earth) Withstand Voltage: 3750 V AC between input and output Dimensions (H x W x D): 84 mm x 57 mm x 29.5 mm Weight: approx. 190 g Safety & EMC Certificates: ENEC, CE, EAC, IP42 LED Indicator: None Manufacturer Warranty: 3 years Information about the MEAN WELL PCD-25-700B Specifically engineered for modern architectural illumination, this constant-current driver features phase-cut dimming functionality compatible with leading and trailing edge TRIAC dimmers. The unit safely operates within harsh environments backed by an IP42 ingress protection rating and a wide operating temperature span of −30 °C to +60 °C. Its fully isolated plastic housing ensures high safety standards without requiring a protective earth connection. Electrical integrity is further reinforced by a strong galvanic separation, delivering a rated isolation voltage of 3750 V AC between primary and secondary circuits. An integrated active power factor correction network stabilizes performance, maintaining high efficiency across diverse utility loads. Adhering to strict international compliance frameworks, the power supply carries trusted safety approvals and electromagnetic certifications including ENEC and CE. Smart internal circuit protections automatically handle fault conditions like short circuits and overtemperature to safeguard connected lighting modules. Long-term reliability and peace of mind are guaranteed through a robust 3 years warranty directly from the manufacturer. Combined with natural convection cooling, this driver delivers silent, maintenance-free operation for extended lighting life cycles.