Technical Information & Details for MEAN WELL ELG-100-C350DA-3Y Power Supply Output Power: 99.75 W (at 200–305 V AC) / 70.35 W (at 100–180 V AC) Output Voltage (Constant Current Region): 143 – 286 V DC Output Current: 350 mA Input Voltage Range: 100 – 305 V AC / 142 – 431 V DC, 47 – 63 Hz Efficiency: up to 90% Current Ripple: 5.0% max. Inrush Current: 40 A / 230 V AC (Cold Start) No Load / Standby Power Consumption: < 0.5 W Operating Temperature (Case): −40 °C to +90 °C (Tcase) Cooling: fanless free air convection Protections: Short Circuit, Over Voltage, Over Temperature Surge Immunity: 6 kV / 4 kV (Line-Earth / Line-Line) Isolation Voltage: 3750 V AC (Input/Output) Dimensions (L x W x H): 199 mm x 63 mm x 35.5 mm Weight: approx. 850 g Safety & EMC Certificates: UL8750 (Type HL), EN61347-1, EN61347-2-13, BIS IS15885, CB, CE, EAC Protection Rating: IP67 Manufacturer Warranty: 5 years Information about the MEAN WELL ELG-100-C350DA-3Y Tailored for high-voltage string configurations requiring protocol-based automation, the MEAN WELL ELG-100-C350DA-3Y constant current driver incorporates a native DALI interface for programmable, addressable lighting control. Primary power feeds through a secure 3-wire input cable complete with an earth conductor. Encapsulated within a rugged metal housing that achieves an ingress rating of IP67, internal components remain fully protected against heavy moisture and dust ingress. Built to withstand physical strain, the assembly maintains absolute mechanical stability under constant 5G vibration forces. Backed by hazardous location compliance under UL8750 Type HL directives and supported by a robust 5-year warranty, this unit ensures exceptional operational durability.

Technical Information & Details for MEAN WELL LCM-25KN LED Driver Output Power: Max. 25.2 W Output Current: 350mA, 500mA, 600mA, 700mA (default), 900mA, 1050mA (selectable via DIP switch) Output Voltage Range: 6 – 54 V DC (depending on selected current) Input Voltage Range: 180 – 277 V AC / 220 – 380 V DC, 47 – 63 Hz Efficiency: up to 85% Current Ripple: max. 5.0% (@ rated current) Inrush Current: Cold start 20A (t_width = 260 µs) at 230 V AC Standby Power Consumption: < 0.5 W Operating Temperature: −30 °C to +85 °C (case temperature Tcase) Cooling: Fanless natural convection Protections: Short circuit, Over temperature (auto-recovery) Withstand Voltage: 3.75 kV AC between input and output Dimensions (L x W x H): 105 mm x 68 mm x 23 mm Weight: approx. 173 g Certifications: ENEC, UL8750, CB, BIS, EAC, KNX certified Interface: Integrated KNX interface & Push dimming Manufacturer Warranty: 3 years Information about the MEAN WELL LCM-25KN The MEAN WELL LCM-25KN is an advanced 25W LED driver featuring a built-in KNX interface, which eliminates the need for complex and costly KNX-DALI gateways in smart building installations. A primary advantage of this model is its multiple-stage constant current output, allowing users to select current levels from 350mA up to 1050mA via convenient DIP switches. This flexibility makes it an ideal "all-in-one" solution for various lighting requirements. Engineered with a flicker-free design and an active PFC function, it ensures stable, high-quality illumination and high energy efficiency for professional indoor and office lighting environments. This driver stands out with its intelligent control features, including Push dimming and the ability to synchronize up to 10 units for uniform light management across larger areas. Its slim Class II plastic housing design allows for easy integration into architectural and panel lighting without requiring a safety ground. Furthermore, the LCM-25KN supports advanced functions such as Constant Light Output (CLO), operating hours monitoring, and power consumption feedback via the KNX bus. These characteristics, combined with a robust thermal design capable of handling case temperatures up to 85°C, ensure long-term reliability for modern intelligent building automation projects.

Technical Information & Details for the MEAN WELL ELG-240-24DA Power Supply Rated Power: 240 W Output Voltage: 24 V DC Rated Current: 10 A Input Voltage Range: 100 – 305 V AC / 142 – 431 V DC, 47 – 63 Hz Efficiency: up to 93 % Ripple & Noise: ≤ 200 mVp-p Inrush Current: 60 A (Twidth=510µs measured at 230 VAC) No Load / Standby Power: Standby power consumption < 0.5 W Working Temperature: −40 °C to +90 °C case temperature Cooling: Fanless free air convection Protection Functions: Short circuit, overcurrent, overvoltage, overtemperature Ingress Protection & Housing: IP67, robust metal housing with functional ground Dimming Technology: Built-in DALI control interface (DA-Type) Dimensions (L x W x H): 244 mm x 71 mm x 37.5 mm Weight: approx. 1.22 kg Safety & EMC Standards: UL8750 (Type HL), CSA, EN61347-1, EN61347-2-13, CE Withstand Voltage: 3.75 kV AC between input and output Manufacturer Warranty: 5 years Information about the MEAN WELL ELG-240-24DA Engineered for high-performance architectural and industrial lighting, the MEAN WELL ELG-240-24DA integrates dual-mode constant voltage and constant current operation inside a sturdy metal enclosure. This versatile driver features native DALI protocol compliance, enabling seamless digital integration into smart building architectures and automated lighting control networks. System integrators benefit from exceptional operational stability across a wide AC input range, ensuring reliable performance even under fluctuating grid conditions. Built-in automatic recovery protection mechanisms safeguard against overloads, thermal spikes, and short circuits without manual intervention. Designed for harsh environments, the unit carries an official IP67 ingress protection rating, making it completely dust-tight and resistant to temporary water immersion for outdoor installations. Compliance with the rigorous UL8750 (Type HL) standard further qualifies this power supply for safe deployment in Class I, Division 2 hazardous industrial locations. The completely fanless cooling architecture relies entirely on free air convection, eliminating moving parts to maximize structural reliability and prevent acoustic noise in sensitive areas. High conversion efficiency reaching up to 93 percent significantly reduces wasted thermal energy during continuous operation. Advanced power factor correction circuitry ensures a high power factor across varying load conditions, meeting strict international harmonic distortion standards for professional lighting applications. Electrical safety is reinforced by a robust withstand voltage of 3.75 kV AC providing high-level galvanic isolation between primary input and secondary output circuits. The unit's thermal management supports an extended case temperature range up to 90 °C, backed by a design life expectancy exceeding 50,000 hours under standard operational thresholds. Precise constant-current region tuning ensures optimal driving compatibility directly with LED modules without requiring auxiliary conversion hardware. Ideal for street lighting, floodlighting, and large-scale industrial bay installations, this driver provides professional engineers with robust build quality and precise digital controllability. Long-term reliability is firmly backed by an industry-leading 5 years manufacturer warranty, offering complete peace of mind for commercial deployments. The comprehensive global safety certification portfolio ensures hassle-free compliance approval for international lighting equipment manufacturers. Through its combination of intelligent DALI connectivity and rugged outdoor readiness, this power supply stands out as a premier choice for modern lighting projects.

Technical Information & Details for MEAN WELL ELG-100-24DA Power Supply Output Power: 96 W (at 200–305 V AC) / 70 W (at 100–180 V AC) Output Voltage: 24 V DC Output Current: 4.0 A Input Voltage Range: 100 – 305 V AC / 142 – 431 V DC, 47 – 63 Hz Efficiency: Up to 88% Ripple & Noise: ≤ 200 mVp-p Inrush Current: COLD START 60 A @ 230 V AC No Load / Standby Power: < 0.5 W Operating Temperature: −40 °C to +90 °C (Case temperature Tcase) Cooling: Fanless free air convection Protections: Short circuit (Hiccup mode), Overload (Constant current limiting), Over voltage, Over temperature Isolation Voltage: 3750 V AC between Input and Output Dimming Control: DALI Interface protocol (IEC 62386 compliant) Ingress Protection / Housing: IP67, Metal housing Dimensions (L x W x H): 199 mm x 63 mm x 35.5 mm Weight: approx. 850 g Safety & EMC Standards: UL8750 (Type HL), EN61347-1, EN61347-2-13, EN55015, EAC, CB, CE AC Input Connection: Standard 2-wire AC input cable Warranty: 5 Years Information about MEAN WELL ELG-100-24DA Direct communication with digital light networks is enabled on the MEAN WELL ELG-100-24DA through its built-in DALI interface (IEC 62386) for intelligent brightness management. Encased in an IP67 potted metallic shell, it offers total protection against dust accumulation and moisture entry. Heat generated during operation dissipates via natural convection cooling without mechanical fans, keeping noise output at zero across case operating temperatures from -40 °C to +90 °C. Accredited to UL8750 (Type HL) for Class I, Division 2 locations, the power supply includes 5 years of manufacturer warranty coverage.

Achtung ELG-75-C350DA hat keinen Schutzleiter!! Das Netzteilgehäuse muss mit einem Schutzleiter verbunden werden! Bei Fragen rufen Sie gerne bei uns an: +49 (0)  9545 440 60-0 Mit Schutzleiter schauen Sie das ELG-75-C350DA-3Y.

Technical Information & Details for MEAN WELL LCM-40KN LED Driver Output Power: 42 W Output Current: 350mA, 500mA, 600mA, 700mA (default), 900mA, 1050mA (selectable via DIP switch) Output Voltage Range: 2 – 100 V DC (depending on selected current) Input Voltage Range: 180 – 295 V AC / 254 – 417 V DC, 47 – 63 Hz Efficiency: up to 90% Auxiliary Output: 12 V / 50 mA (ideal for sensors) Inrush Current: Cold start 20A (t_width = 260 µs) at 230 V AC Standby Power Consumption: < 0.5 W Operating Temperature: −30 °C to +90 °C (case temperature Tcase) Cooling: Fanless natural convection Protections: Short circuit, Over voltage, Over temperature (auto-recovery) Withstand Voltage: 3.75 kV AC between input and output Dimensions (L x W x H): 123.5 mm x 81.5 mm x 23 mm Weight: approx. 240 g Certifications: ENEC, UL8750, CB, EAC, KNX certified Interface: Integrated KNX interface & Push dimming Manufacturer Warranty: 3 years Information about the MEAN WELL LCM-40KN The MEAN WELL LCM-40KN is a high-performance 40W LED driver designed for direct implementation into KNX building automation environments. By featuring a built-in KNX interface, it eliminates the requirement for complex KNX-DALI gateways, streamlining the installation process and lowering overall system costs. A standout feature is its multiple-stage constant current output, allowing users to select current levels between 350mA and 1050mA via integrated DIP switches. This flicker-free design guarantees superior light quality, making it ideal for professional office spaces and architectural lighting projects. Beyond standard lighting control, the LCM-40KN supports advanced digital functions such as Constant Light Output (CLO), operating hours monitoring, and power consumption feedback directly to the KNX bus. The unit also includes a useful 12V auxiliary DC output for powering small external devices like sensors and offers the capability to synchronize up to ten drivers for perfectly matched lighting zones. With its slim Class II plastic housing and compliance for emergency lighting applications, this driver provides a reliable and future-proof solution for intelligent building projects, maintaining stable operation even at case temperatures up to 90°C.