DLP-04L

Technical Information & Details for the MEAN WELL SPWM-240-24DA2Q Power Supply Rated Power: 240 W Output Voltage: 24 V DC Output Current: 10 A Input Voltage Range: 180 – 305 V AC / 255 – 410 V DC Efficiency: 94 % PWM Frequency: 3.2 kHz (fixed) Inrush Current: 60 A @ 230 VAC (Cold Start) Standby Power Consumption: < 0.5 W (Dimming off) Working Temperature: −20 °C to +90 °C (Tcase) Cooling: Free air convection (fanless) Protection Functions: Short circuit, Overload, Over voltage, Over temperature DALI Standard: DALI-2 DT8 (Tunable White / RGBW) Isolation Voltage: 3.75 KV AC (I/P-O/P) Dimensions (L x W x H): 380 mm x 38 mm x 28.5 mm Weight: approx. 540 g Safety & EMC Certificates: ENEC, CB, EAC, CE, UKCA, CCC Dimming Function: DALI-2 + PUSH Dimming (4 channels) Manufacturer Warranty: 5 Years Information about the MEAN WELL SPWM-240-24DA2Q The MEAN WELL SPWM-240-24DA2Q is a premium 240W LED driver specifically engineered for advanced lighting control systems requiring Tunable White, RGB, or RGBW functionality. Equipped with the latest DALI-2 DT8 protocol, this model allows for sophisticated color and temperature management across four independent output channels, ensuring absolute precision in architectural and decorative lighting. A core strength of this unit is its 3.2 kHz PWM output frequency, which provides a completely flicker-free experience that adheres to the highest visual comfort standards and the CE ErP directive. The ultra-slim linear housing, with a remarkably low profile of 28.5 mm, makes it the ideal choice for integration into tight spaces such as modern furniture, cove lighting, or narrow ceiling profiles. Efficiency is at the heart of its design, reaching up to 94%, which minimizes thermal loss and allows for a reliable fanless operation even in demanding environments. Additionally, the built-in PUSH dimming capability offers unmatched installation flexibility, allowing for simple manual overrides without the need for a dedicated DALI controller, while the robust protection circuits ensure a long service life of up to 50,000 hours.

Technical Information & Details for the MEAN WELL SPWM-240-24DA2 Power Supply Rated Power: 240 W Output Voltage: 24 V DC Output Current: 10 A Input Voltage Range: 180 – 305 V AC / 255 – 410 V DC Efficiency: 94 % PWM Frequency: 3.2 kHz Inrush Current: 60 A at 230 VAC Standby Power Consumption: < 0.5 W Working Temperature: −20 °C to +90 °C (Tcase) Cooling: Free air convection Protection Functions: Short circuit, Overload, Over voltage, Over temperature DALI Standard: DALI-2 DT6 (1-channel) Isolation Voltage: 3.75 KV AC Dimensions (L x W x H): 380 mm x 38 mm x 28.5 mm Weight: 0.54 kg Safety Standards: ENEC, BS EN/EN61347, CB, EAC, CCC Special Feature: Flicker-free (PstLM < 1, SVM < 0.4) Manufacturer Warranty: 5 Years Information about the MEAN WELL SPWM-240-24DA2 The MEAN WELL SPWM-240-24DA2 is a high-performance 240W LED driver featuring constant voltage PWM style output, specifically engineered to maintain color temperature and brightness homogeneity for all types of LED strips. Equipped with a DALI-2 DT6 interface, this model provides advanced digital dimming capabilities down to a minimum level of 0.1%, ensuring precise control for professional lighting setups. Its ultra-slim plastic housing design, with a profile height of only 28.5 mm, allows for discrete installation in confined spaces such as architectural coves or furniture. The driver is certified flicker-free, complying with the CE ErP directive to provide superior visual comfort and eliminate eye strain in residential and commercial environments. Beyond digital control, it features a primary-side PUSH dimming function, allowing for intuitive manual operation via a simple push button. With a top-tier efficiency of up to 94% and a fanless design, the unit operates silently while offering a typical life expectancy of 50,000 hours, making it a reliable and energy-efficient choice for modern building automation and decorative lighting applications.

Technical Information & Details for MEAN WELL HLG-185H-48AB Power Supply Output Power: 187.2 W Output Voltage: 48 V DC Output Current: 3.9 A Input Voltage Range: 90 – 305 V AC / 127 – 431 V DC, 47 – 63 Hz Efficiency: 94% Voltage Adj. Range (Vo ADJ): 43 – 53 V (via internal potentiometer) Current Adj. Range (Io ADJ): 1.95 – 3.9 A (via internal potentiometer) Dimming Function: 3-in-1 dimming (1–10V DC, 10V PWM signal, resistance) Ripple & Noise: ≤ 200 mVp-p Power Factor: PF ≥ 0.98 / 115 VAC, PF ≥ 0.95 / 230 VAC Operating Temperature: −40 °C to +90 °C (Case Temperature) Cooling: Fanless natural convection Protections: Short Circuit, Over Current, Over Voltage, Over Temperature IP Rating: IP65 (Dust-tight and protected against water jets) Isolation Voltage: 3750 V AC (Input to Output) Dimensions (L x W x H): 228 mm x 68 mm x 38.8 mm Weight: approx. 1150 g Safety & EMC Certificates: UL8750, EN61347-1, EN61347-2-13, IP65, EAC, CE Manufacturer Warranty: 7 Years Information about the MEAN WELL HLG-185H-48AB The MEAN WELL HLG-185H-48AB represents the ultimate flexibility in the 185W HLG series by combining internal manual tuning with external intelligent dimming. As an "AB-Type" model, it empowers professional installers to fine-tune the output voltage and current levels via built-in potentiometers while simultaneously supporting a versatile 3-in-1 dimming interface compatible with 1-10VDC, PWM signals, or external resistance. This hybrid design is ideal for sophisticated LED installations that require a precise static setup alongside dynamic brightness adjustment. The durable IP65-rated metal housing ensures high resistance to dust and water, making it perfect for outdoor and industrial environments such as LED street lights, high-bay lighting, and professional greenhouse systems. Featuring dual-mode constant voltage and constant current output, the driver reaches an exceptional efficiency of 94%. Its fanless cooling design allows for reliable operation across a broad temperature range of -40 °C to +90 °C. Backed by a 7-year manufacturer warranty and a typical life expectancy of over 62,000 hours, the HLG-185H-48AB is a top-tier choice for sustainable, long-term architectural and infrastructure projects.

Technical Information & Details about the MEAN WELL HDR-150-48 Power Supply Output Power: 153.6 W Output Voltage: 48 V DC Output Current: 3.2 A Input Voltage Range: 85 – 264 V AC (277 V AC operational) / 120 – 370 V DC (390 V DC operational), 47 – 63 Hz Efficiency: up to 90.5 % Ripple & Noise: ≤ 200 mVp-p Inrush Current: 35 A @115 V AC / 70 A @230 V AC (cold start) Output Voltage Adjustment Range: 43.2 – 55.2 V DC Voltage Tolerance: ±2.0 % Line Regulation: ±1.0 % Load Regulation: ±1.0 % Setup, Rise Time: 500 ms, 60 ms @230 V AC / 115 V AC (full load) Hold-up Time: 30 ms @230 V AC / 12 ms @115 V AC (full load) No-load Power Consumption: < 0.3 W Operating Temperature: −30 °C to +70 °C (with derating according to curve) Cooling: fanless free air convection Protection Functions: short circuit (hiccup mode, auto recovery), overload (constant current limiting within 50–100 % of rated output voltage, auto recovery), overvoltage (shut down, re‑power to recover) Overvoltage Category: OVC III (up to 2000 m altitude) Isolation Voltage: 4000 V AC between input and output Isolation Resistance: ≥ 100 MΩ @ 500 V DC, 25 °C, 70 % RH Dimensions (W x H x D): 105 mm x 90 mm x 54.5 mm Weight: approx. 310 g Housing Material: insulating plastic, Class II, ultra-slim step-shape design Mounting: DIN rail TS35/7.5 or TS35/15 Safety & EMC Certifications: IEC 62368-1, UL 62368-1, UL 61010, TUV BS EN/EN 61558-2-16, BS EN/EN 61558-1, EAC TP TC 004, BIS IS13252, compliant with BS EN/EN 55032, BS EN/EN 55024, BS EN/EN 61000-6-2 LED Indicator: Power On LED indicator Manufacturer Warranty: 3 years About the MEAN WELL HDR-150-48 The MEAN WELL HDR-150-48 is a 150 W ultra-slim DIN-rail power supply that delivers a regulated 48 V DC / 3.2 A output in a compact 105 mm wide step-shape housing, ideal for narrow distribution boards and space-limited control panels. With its wide universal input range of 85–264 V AC or 120–370 V DC and high efficiency up to 90.5 %, it is well suited for energy-efficient 48 V bus systems in building automation, industrial control, and communication equipment. The adjustable 43.2–55.2 V output range provides flexibility to compensate for voltage drops and to feed downstream DC/DC converters, actuators, and communication modules with stable 48 V power. Its Class II plastic enclosure with reinforced insulation enhances electrical safety and simplifies installation by eliminating the need for a protective earth connection. Combined with fanless convection cooling, very low no-load power consumption below 0.3 W, a wide operating temperature range from −30 °C to +70 °C, and comprehensive protection and certification features, the HDR-150-48 offers a robust, long-life 48 V power solution for demanding building and industrial automation applications.

Technical Information & Details about the MEAN WELL HDR-100-24 Power Supply Output Power: 92 W Output Voltage: 24 V DC Output Current: 3.83 A Current Range: 0 – 3.83 A Input Voltage Range: 85 – 264 V AC (277 V AC operational) / 120 – 370 V DC (390 V DC operational), 47 – 63 Hz Efficiency: up to 90 % Ripple & Noise: ≤ 150 mVp-p Output Voltage Adjustment Range (LPS type): 24 – 25.5 V DC Extended Adjustment Range (Non‑LPS “N” type): 21.6 – 29 V DC Voltage Tolerance: ±2.0 % Line Regulation: ±1.0 % Load Regulation: ±1.0 % Setup, Rise Time: 500 ms, 60 ms @230 V AC / 115 V AC (full load) Hold-up Time: 30 ms @230 V AC / 12 ms @115 V AC (full load) AC Input Current (typ.): 3 A @115 V AC / 1.6 A @230 V AC Inrush Current: 35 A @115 V AC / 70 A @230 V AC (cold start) No-load Power Consumption: < 0.3 W Operating Temperature: −30 °C to +70 °C (with derating according to curve) Operating Humidity: 20 – 90 % RH, non‑condensing Storage Conditions: −40 °C to +85 °C, 10 – 95 % RH, non‑condensing Cooling: fanless free air convection Protection Features: short circuit (hiccup mode, auto recovery), overload (constant current limiting within 50–100 % of rated output voltage, auto recovery), overvoltage (shut down, re‑power to recover) Overvoltage Protection Threshold: 30 – 36 V DC Overvoltage Category: OVC III (up to 2000 m altitude) Isolation Voltage: 4000 V AC between input and output Isolation Resistance: ≥ 100 MΩ @ 500 V DC, 25 °C, 70 % RH Dimensions (W x H x D): 70 mm x 90 mm x 54.5 mm Weight: approx. 270 g Housing Material: insulating plastic housing, Class II, ultra‑slim 4‑SU step‑shape Mounting: DIN rail TS35/7.5 or TS35/15 Vibration Resistance: 10 – 500 Hz, 2 G, 60 min per axis (X, Y, Z) Safety & EMC Certificates: UL 62368‑1, UL 508, TUV BS EN/EN 61558‑2‑16, BS EN/EN 61558‑1, IEC 62368‑1, EAC TP TC 004, BSMI CNS15598‑1, BIS IS13252, compliant with BS EN/EN 55032, BS EN/EN 55035, BS EN/EN 61000‑6‑2, BS EN/EN 61204‑3 LPS Classification: Pass LPS for “blank” models (up to 92 W, narrower adjustment range), Non‑LPS for “N” models (up to 100.8 W with wider adjustment range) LED Indicator: Power‑On status LED Manufacturer Warranty: 3 years About the MEAN WELL HDR-100-24 The MEAN WELL HDR-100-24 is an ultra‑slim 100 W class DIN‑rail power supply that provides a regulated 24 V DC output at up to 3.83 A in a compact 70 mm (4 SU) housing, ideal for space‑constrained 24 V control panels. With a universal input range, high efficiency up to 90 %, very low no‑load consumption and fanless free air convection, it delivers an energy‑efficient 24 V bus for building automation, household control systems and industrial control cabinets. LPS‑compliant “blank” models with a tighter adjustment window and higher‑power “N” versions with an extended adjustment range up to 29 V give designers flexibility between safety classification and additional voltage headroom. Together with the Class II plastic enclosure, comprehensive protection features and broad international approvals, HDR-100-24 is a robust, low‑maintenance 24 V power solution for PLCs, I/O modules, valves, relays and other 24 V control electronics.