LS-50V24-D3

Technische Eigenschaften des SC Power KVF-24030-TD: Leistung: 30W Spannung: 24V Ausgangsstrom: 1250mA Konstantspannungsausgang Eingangsbereich: 200-240VAC Arbeitseffizienz: bis zu 79% TRIAC Dimmer: Phasenan-/abschnittsdimmung/ Phase Cut Einfache Installation IP66 Design; Geeignet für Outdoor-Installationen Kühlung durch freie Luftkonvektion Schutz vor Kurzschluss, Überlast, Überstrom und Überhitzung Eingebaute PFC Funktion Perfekte Kompatibilität; Flimmerfreie Dimmung Geeignet für LED-Beleuchtungssysteme und Displayanzeigen

Technical Information & Details of the MEAN WELL PWM-60-24KN LED Driver Output Power: 60 W Output Voltage: 24 V DC Output Current: 2.5 A Dimming Range: 0 – 100 % (PWM dimming) Minimum Dimming Level: 0.01 % PWM Output Frequency: 200 – 4,000 Hz, user‑changeable via ETS Input Voltage Range: 90 – 305 V AC / 127 – 431 V DC Input Frequency: 47 – 63 Hz Power Factor (typ.): > 0.97 @115 VAC, > 0.95 @230 VAC, > 0.92 @277 VAC (full load) Efficiency (typ.): approx. 89 % AC Input Current (typ.): 0.8 A @115 VAC / 0.4 A @230 VAC / 0.32 A @277 VAC Inrush Current (typ.): 50 A @230 VAC (cold start, twidth ≈350 μs, per NEMA 410) THD: < 20 % (≥60 % load @115 / 230 VAC; ≥75 % load @277 VAC) Standby Power Consumption: < 0.5 W Overload Protection: 108 – 130 % of rated power, hiccup mode, auto recovery Overvoltage Protection: shut down output, re‑power on to recover (typ. 28 – 34 V DC) Overtemperature Protection: shut down output, re‑power on to recover Short‑circuit Protection: hiccup mode, auto recovery Operating Temperature (case): −35 °C to +85 °C (derating according to “Output load vs. temperature” curve) Operating Humidity: 20 – 95 % RH, non‑condensing Storage Temperature / Humidity: −35 °C to +80 °C, 10 – 95 % RH Temperature Coefficient: ±0.03 % / °C (0 – 50 °C) Vibration Resistance: 10 – 500 Hz, 5 G, 12 min./cycle, 72 min. along each X, Y, Z axis Dielectric Strength: 3.75 kVAC (input–output) Isolation Resistance: > 100 MΩ @500 VDC, 25 °C, 70 % RH Safety Standards: ENEC EN 61347‑1, EN 61347‑2‑13, EN 62384 (independent), GB19510.1 / GB19510.14, BIS IS 15885 (Part 2/Sec 13 for 12/24 KN), EAC KNX Standards: Certified KNX protocol EMC Emission: EN 55015, EN 61000‑3‑2 Class C (≥60 % load), EN 61000‑3‑3, GB/T 17743, GB17625.1, EAC TP TC 020 EMC Immunity: EN 61000‑4‑2,3,4,5,6,8,11; EN 61547 (light industry level, 2 kV Line‑Line surge), EAC TP TC 020 MTBF (typ.): 2,135,200 h (Telcordia SR‑332, 25 °C) / 247,700 h (MIL‑HDBK‑217F, 25 °C) Dimensions (L x W x H): 150 mm x 53 mm x 35 mm Weight: approx. 0.45 kg Case & Protection: fully encapsulated plastic housing, IP67, Class II Cooling Method: fanless, free air convection Information about the MEAN WELL PWM-60-24KN The MEAN WELL PWM‑60‑24KN is a 60 W constant‑voltage LED driver with 24 V DC PWM‑style output and a fully integrated KNX interface, created for direct connection to KNX building automation systems without requiring a KNX‑DALI gateway. Its PWM constant‑voltage output allows 24 V LED strips and constant‑voltage LED lamps to maintain uniform brightness and colour appearance over long runs, even when dimmed deeply. Key strengths of the PWM‑60‑24KN include the very low minimum dimming level of 0.01 % and the user‑adjustable PWM frequency from 200 Hz up to 4 kHz via ETS, enabling setups that comply with IEEE 1789‑2015 “no risk” recommendations and EU Ecodesign SVM flicker limits. Combined with a typical efficiency of around 89 %, a wide 90–305 V AC input range and a fully potted IP67 plastic housing, the driver is well suited for long‑life installations in indoor architectural, decorative and ambient lighting applications where flicker and visual comfort are critical. The native KNX protocol support also stands out: the driver can be addressed and programmed in ETS, and the PWM KN series even supports ETS addressing/programming without AC mains connected, simplifying commissioning on site. Together with its broad case temperature range from −35 °C to +85 °C, robust protection features and international approvals, the PWM‑60‑24KN offers a compact, reliable KNX‑centrical solution for 24 V LED strip lighting, indoor LED lighting and constant‑voltage LED bulbs in smart building projects.

Technical Information & Details for MEAN WELL LCM-40KN LED Driver Output Power: 42 W Output Current: 350mA, 500mA, 600mA, 700mA (default), 900mA, 1050mA (selectable via DIP switch) Output Voltage Range: 2 – 100 V DC (depending on selected current) Input Voltage Range: 180 – 295 V AC / 254 – 417 V DC, 47 – 63 Hz Efficiency: up to 90% Auxiliary Output: 12 V / 50 mA (ideal for sensors) Inrush Current: Cold start 20A (t_width = 260 µs) at 230 V AC Standby Power Consumption: < 0.5 W Operating Temperature: −30 °C to +90 °C (case temperature Tcase) Cooling: Fanless natural convection Protections: Short circuit, Over voltage, Over temperature (auto-recovery) Withstand Voltage: 3.75 kV AC between input and output Dimensions (L x W x H): 123.5 mm x 81.5 mm x 23 mm Weight: approx. 240 g Certifications: ENEC, UL8750, CB, EAC, KNX certified Interface: Integrated KNX interface & Push dimming Manufacturer Warranty: 3 years Information about the MEAN WELL LCM-40KN The MEAN WELL LCM-40KN is a high-performance 40W LED driver designed for direct implementation into KNX building automation environments. By featuring a built-in KNX interface, it eliminates the requirement for complex KNX-DALI gateways, streamlining the installation process and lowering overall system costs. A standout feature is its multiple-stage constant current output, allowing users to select current levels between 350mA and 1050mA via integrated DIP switches. This flicker-free design guarantees superior light quality, making it ideal for professional office spaces and architectural lighting projects. Beyond standard lighting control, the LCM-40KN supports advanced digital functions such as Constant Light Output (CLO), operating hours monitoring, and power consumption feedback directly to the KNX bus. The unit also includes a useful 12V auxiliary DC output for powering small external devices like sensors and offers the capability to synchronize up to ten drivers for perfectly matched lighting zones. With its slim Class II plastic housing and compliance for emergency lighting applications, this driver provides a reliable and future-proof solution for intelligent building projects, maintaining stable operation even at case temperatures up to 90°C.

Technical Information & Details for the KVF-24200-TDH Power Supply Output Power: 200 W Output Voltage: 24 V DC Output Current: 8.33 A Input Voltage Range: 200 – 240 V AC, 47 – 63 Hz Efficiency: up to 87 % Inrush Current: typ. 96 A @ 230 V AC Operating Temperature: -40 °C to +60 °C Cooling: fanless free air convection Protections: Short circuit, over load, over temperature Waterproof Rating: IP66 Dimming Function: Triac / Leading & trailing edge phase cut (0-100%) Isolation Voltage: 3750 V AC (Input to Output) Dimensions (L x W x H): 256 mm x 78 mm x 47 mm Weight: approx. 1.45 kg Safety & EMC Certificates: ENEC, TUV, SAA, CB, CCC, CE, SELV, RoHS, REACH Manufacturer Warranty: 5 years Information about the KVF-24200-TDH The KVF-24200-TDH is a highly durable and efficient 200W constant voltage LED driver designed specifically to power professional 24V lighting systems. One of the standout features of this model is its flicker-free PWM dimming output (20 kHz), which provides smooth, precise brightness control from 0 to 100% and is fully compatible with both leading edge and trailing edge TRIAC dimmers. Housed in a rugged, IP66-rated waterproof enclosure and engineered to operate across extreme temperatures from -40 °C to +60 °C, this driver ensures unwavering reliability in both demanding indoor and harsh outdoor environments. Furthermore, the built-in active PFC function optimizes power factor and overall energy efficiency while delivering a highly stable 24V direct current. In addition to its exceptional dimming capabilities, this premium power supply features a fanless free air convection cooling system that guarantees completely silent operation and eliminates mechanical failure risks. It is equipped with comprehensive, auto-recovering protection mechanisms against short circuits, overloads, and over-temperature conditions, safeguarding your valuable LED installations against unexpected faults. Supported by an industry-leading 5-year manufacturer warranty and rigorously tested to meet global safety standards including ENEC, TUV, CE, and SELV, the KVF-24200-TDH is an outstanding, reliable choice for high-end dimmable lighting applications.