KVF-24150-TDH

Technische Eigenschaften des SC Power KVF-24100-TDH: Leistung: 100W Spannung: 24V Ausgangsstrom: 4,17A Konstantspannungsausgang Eingangsbereich: 180-240VAC Arbeitseffizienz: bis zu 87% TRIAC Dimmer: Phasenan-/abschnittsdimmung/ Phase Cut Einfache Installation IP66 Design; Geeignet für Outdoor-Installationen Kühlung durch freie Luftkonvektion Schutz vor Kurzschluss, Überlast, Überstrom und Überhitzung Eingebaute PFC Funktion Perfekte Kompatibilität; Flimmerfreie Dimmung Geeignet für LED-Beleuchtungssysteme und Displayanzeigen

Technical Information & Details for the KVF-24200-TDH Power Supply Output Power: 200 W Output Voltage: 24 V DC Output Current: 8.33 A Input Voltage Range: 200 – 240 V AC, 47 – 63 Hz Efficiency: up to 87 % Inrush Current: typ. 96 A @ 230 V AC Operating Temperature: -40 °C to +60 °C Cooling: fanless free air convection Protections: Short circuit, over load, over temperature Waterproof Rating: IP66 Dimming Function: Triac / Leading & trailing edge phase cut (0-100%) Isolation Voltage: 3750 V AC (Input to Output) Dimensions (L x W x H): 256 mm x 78 mm x 47 mm Weight: approx. 1.45 kg Safety & EMC Certificates: ENEC, TUV, SAA, CB, CCC, CE, SELV, RoHS, REACH Manufacturer Warranty: 5 years Information about the KVF-24200-TDH The KVF-24200-TDH is a highly durable and efficient 200W constant voltage LED driver designed specifically to power professional 24V lighting systems. One of the standout features of this model is its flicker-free PWM dimming output (20 kHz), which provides smooth, precise brightness control from 0 to 100% and is fully compatible with both leading edge and trailing edge TRIAC dimmers. Housed in a rugged, IP66-rated waterproof enclosure and engineered to operate across extreme temperatures from -40 °C to +60 °C, this driver ensures unwavering reliability in both demanding indoor and harsh outdoor environments. Furthermore, the built-in active PFC function optimizes power factor and overall energy efficiency while delivering a highly stable 24V direct current. In addition to its exceptional dimming capabilities, this premium power supply features a fanless free air convection cooling system that guarantees completely silent operation and eliminates mechanical failure risks. It is equipped with comprehensive, auto-recovering protection mechanisms against short circuits, overloads, and over-temperature conditions, safeguarding your valuable LED installations against unexpected faults. Supported by an industry-leading 5-year manufacturer warranty and rigorously tested to meet global safety standards including ENEC, TUV, CE, and SELV, the KVF-24200-TDH is an outstanding, reliable choice for high-end dimmable lighting applications.

Technical Information & Details for the SCPOWER KVE-24320-TDHA-PH Power Supply Output Power: 320 W Output Voltage: 24 V DC Output Current: 13.33 A Input Voltage Range: 200 – 240 V AC, 50/60 Hz Efficiency: Up to 93% Voltage Ripple: 400 mVp-p Inrush Current: 120 A, 96 us @ 230 VAC Power Factor: > 0.95 @ full load Operating Temperature: -40 °C to +40 °C Cooling: Free air convection (fanless) Protection Functions: Short circuit, Over load, Over temperature Waterproof Rating: IP66 Dimming Function: PWM Output (TRIAC Leading/Trailing Edge) Dimensions (L x W x H): 232 mm x 78.1 mm x 25.3 mm Weight: 1 kg Safety & EMC Certificates: CE, UKCA, SELV, EN61347, EN55015 Dimming Range: 0-100% (0.1% depth) Manufacturer Warranty: 5 years Information on the SCPOWER KVE-24320-TDHA-PH The SCPOWER KVE-24320-TDHA-PH is a high-performance 320W TRIAC dimmable LED driver specifically engineered for professional lighting environments requiring precise control and high reliability. Featuring a slim 25.3mm profile and a robust IP66 waterproof rating, this constant voltage driver is ideal for both indoor and outdoor architectural applications. Its standout capability is the advanced Pulse-Width Modulation (PWM) output mode, which ensures a flicker-free dimming experience across a full 0-100% range with an impressive depth of 0.1%. By supporting both leading-edge and trailing-edge TRIAC dimmers, it offers maximum compatibility with existing lighting control systems, making it a versatile choice for high-end LED installations. Beyond its dimming prowess, this driver excels in energy efficiency and durability, achieving a typical efficiency of 93% and featuring built-in active PFC for a high power factor of over 0.95. The unit is designed for longevity, backed by a 5-year warranty and comprehensive safety protections including hiccup mode recovery for short circuits and overloads. Its wide operating temperature range from -40°C to +40°C and fanless cooling by free air convection ensure silent and stable operation even in demanding environments. This combination of a high-frequency 20KHz output and superior thermal management makes the KVE-24320-TDHA-PH a premier solution for heavy-duty LED lighting projects that demand both power and finesse.

Technische Eigenschaften des SC Power KVF-24120-TDH: Leistung: 120W Spannung: 24V Ausgangsstrom: 5A Konstantspannungsausgang Eingangsbereich: 180-240VAC Arbeitseffizienz: bis zu 90% TRIAC Dimmer: Phasenan-/abschnittsdimmung/ Phase Cut Einfache Installation IP66 Design; Geeignet für Outdoor-Installationen Kühlung durch freie Luftkonvektion Schutz vor Kurzschluss, Überlast, Überstrom und Überhitzung Eingebaute PFC Funktion Perfekte Kompatibilität; Flimmerfreie Dimmung Geeignet für LED-Beleuchtungssysteme und Displayanzeigen

Technical Information & Details for MEAN WELL LPV-150-24 Power Supply Output power: 151.2 W Output voltage: 24 V DC Rated output current: 6.3 A Output current range: 0 – 6.3 A Output characteristic: constant voltage mode Ripple & noise: max. 200 mVp-p Voltage tolerance: ± 1.0% Line regulation: ± 2.0% Load regulation: ± 5.0% Input voltage range: 180 – 305 V AC / 254 – 431 V DC, 47 – 63 Hz Efficiency (typical): 89% AC input current: 1.7 A @ 230 V AC / 1.5 A @ 277 V AC Inrush current (cold start): 60 A @ 230 V AC (twidth = 900 µs, 50% Ipeak) Leakage current: max. 0.25 mA @ 240 V AC Setup & rise time: 500 ms, 50 ms @ 230 V AC / 277 V AC Hold-up time (typical): 18 ms @ 230 V AC / 20 ms @ 277 V AC (full load) Overload protection: 110 – 150% of rated output power, hiccup mode, auto recovery Over-voltage protection: 27 – 35 V DC, shutdown with automatic recovery after fault removal Over-temperature protection: output shutdown, automatic restart after cooling down Operating temperature: −25 °C to +65 °C (power derating according to derating curve) Operating humidity: 20 – 90% RH, non-condensing Storage temperature & humidity: −40 °C to +80 °C, 10 – 95% RH Temperature coefficient: ± 0.03% / °C (0 – 50 °C) Cooling: fanless design, cooling by free air convection Case material: fully insulated, flame-retardant plastic housing (UL 94V-0) Ingress protection: IP67 Dielectric strength: 3,000 V AC (input to output) Insulation resistance: > 100 MΩ @ 500 V DC, 25 °C, 70% RH Vibration resistance: 10 – 500 Hz, 2 G, 10 min./cycle along each of the X, Y, Z axes MTBF: 3,361,200 h (Telcordia SR-332, 25 °C) Dimensions (L x W x H): 191 mm x 63 mm x 37.5 mm Weight: 0.79 kg Cable connections: primary SJTW 14 AWG, secondary SJTW 18 AWG, pre‑wired leads Recommended mounting: horizontal mounting, case type LPC-150 as per mechanical drawing Safety standards: UL 8750, CSA C22.2 No. 250.13-12, UL 879, CSA C22.2 No. 207-M89, IEC/EN 62368-1, BIS IS 15885 (for LPV-150-24), EAC EMC standards: EN 55032 (CISPR 32) Class B, EN 55035, EN 61000-3-2 Class A (≤ 80% load), EN 61000-3-3, EN 61000-4-2/3/4/5/6/8/11 Device class: Class II power unit, double insulated, no FG (earth) connection Application environment: suitable for indoor use or outdoor use without direct sunlight exposure Manufacturer warranty: 2 years Information about MEAN WELL LPV-150-24 The MEAN WELL LPV-150-24 is a 150 W constant voltage LED power supply that delivers a stable 24 V DC output at up to 6.3 A, making it an excellent choice for 24 V LED strips, signage, and architectural lighting systems. Its key strengths include a fully encapsulated IP67-rated housing for reliable operation in dry, damp, and wet locations, a fanless free‑air convection design for silent and low‑maintenance operation, and comprehensive protections against short-circuit, overload, over-voltage, and over-temperature with automatic recovery. With a wide 180–305 V AC input range, high efficiency around 89%, and long service life, the LPV-150-24 is ideally suited for professional 24 V LED installations that require dependable continuous operation in both indoor and protected outdoor environments.Only for installation in devices whose primary use is other than lighting, e.g. copiers, overhead and slide projectors, or for scale and display lighting.

Technical Information & Details for the MEAN WELL HLG-185H-24AB Power Supply Output Power: 187.2 W Output Voltage: 24 V DC Output Current: 7.8 A Input Voltage Range: 90 – 305 V AC / 127 – 431 V DC, 47 – 63 Hz Efficiency: 94% Ripple & Noise: ≤ 150 mVp-p Dimming Function: 3-in-1 dimming (1-10VDC, 10V PWM, resistance) Voltage Adjustment Range: 22 – 27 V (via internal potentiometer) Current Adjustment Range: 3.9 – 7.8 A (via internal potentiometer) Power Factor (PF): ≥ 0.98 / 115 VAC, ≥ 0.95 / 230 VAC Operating Temperature: −40 °C to +90 °C (Case Temperature) Cooling: Fanless, free air convection Protection Functions: Short circuit, Over current, Over voltage, Over temperature Ingress Protection: IP65 (Dust-tight and protected against water jets) Isolation Voltage: 3750 V AC between Input and Output Dimensions (L x W x H): 228 mm x 68 mm x 38.8 mm Weight: approx. 1150 g Safety & EMC Certificates: UL8750, EN61347-1, EN61347-2-13, IP65, EAC, CE Manufacturer Warranty: 7 Years Information about the MEAN WELL HLG-185H-24AB The MEAN WELL HLG-185H-24AB stands as the most versatile choice for professional LED applications, offering a unique combination of localized control and remote dimming capabilities. As an AB-Type model, it features integrated potentiometers that allow installers to manually calibrate the output voltage (22–27V) and current (3.9–7.8A) on-site, while also supporting 3-in-1 dimming technology. This interface enables seamless integration with automated control systems using 1-10VDC, 10V PWM signals, or external resistance. The driver utilizes dual-mode constant voltage and constant current output, providing a stable power foundation for high-performance LED street lighting, stadium lamps, and industrial high-bay fixtures. Encased in a heavy-duty IP65-rated aluminum housing, it is engineered to withstand moisture and dust in the most demanding environments. With an outstanding energy efficiency of 94%, the fanless design operates silently and maintains a typical life expectancy of over 62,000 hours. To ensure complete peace of mind for large-scale infrastructure projects, the HLG-185H-24AB is backed by a premier 7-year manufacturer warranty, reflecting its industrial-grade durability.