SS20-24VF

In: 220-240VAC 50/60Hz / 0,17A / Eff.: 87%Out: 24VDC / 30W / 1,25A / 154x50x14

Technical Information & Details for the SNAPPY SS60-24VF Power Supply Output Power: 60 W Output Voltage: 24 V DC Output Current: 0 – 2.5 A Input Voltage Range: 220 – 240 V AC (198 – 264 V AC), 47 – 63 Hz Efficiency: 88 % Ripple & Noise: ± 3 % (PK-PK) Inrush Current: max. 30 A @ 230 VAC (Cold start) Stand-by Power Consumption: < 0.5 W Operating Temperature: −20 °C to +45 °C Cooling: Natural convection (fanless) Protections: Short circuit, Overload, Over voltage, Over temperature IP Rating: IP20 Isolation Voltage: 3750 V AC (Input to Output) Dimensions (L x W x H): 159 mm x 57.8 mm x 18 mm Weight: 250 g Safety & EMC Certificates: TUV, CE, SAA, EN61347-1/-2-13, EN55015 Power Factor: 0.95 (Typical at full load) Manufacturer Warranty: 5 years Information about the SNAPPY SS60-24VF The SNAPPY SS60-24VF is a high-performance constant voltage driver specifically engineered for indoor LED installations requiring a steady 24V supply. Its ultra-slim profile, measuring only 18 mm in height, makes it an ideal choice for space-constrained environments such as retail displays, furniture lighting, and architectural accents. Equipped with a built-in active PFC function, the unit achieves a superior power factor of 0.95 and remarkably low total harmonic distortion, ensuring compliance with modern energy standards while maximizing operational efficiency. The internal glue potting and durable plastic shell provide added reliability, protecting the internal components while maintaining a fanless, silent operation through natural air convection. This power supply is designed for maximum uptime, featuring an intelligent protection system that safeguards against short circuits, voltage spikes, and thermal overloads. The auto-recovery hiccup mode is a key benefit, allowing the device to resume normal operation automatically once a fault condition is removed, which significantly reduces maintenance efforts. Rigorously tested to meet worldwide safety regulations like TUV and SAA, it features reinforced insulation with a 3750V isolation rating between input and output. Backed by a 5-year warranty and a 30,000-hour rated lifetime at full load, the SS60-24VF offers a dependable and energy-efficient solution for professional lighting projects ranging from advertising lights to industrial sensor power.

Technical Information & Details on MEAN WELL HLG-40H-24A Power Supply Output Power: 40 W Output Voltage: 24 V DC Output Current: 1.67 A Input Voltage Range: 90 – 305 V AC / 127 – 431 V DC, 47 – 63 Hz Efficiency: up to 88.5 % Ripple & Noise: ≤ 200 mVp-p Inrush Current: max. 50 A @ 230 VAC No-Load Power: low Operating Temperature: −40 °C to +80 °C Cooling: natural convection Protections: Short circuit (Hiccup), Overload, Overvoltage, Over temperature Overvoltage Category: II Isolation Voltage: 3.75 kV AC between input and output Dimensions (H x W x D): 17 x 61.5 x 147.2 mm Weight: ca. 730 g Safety & EMC Certifications: CE, UL8750, TUV, CB, EAC, IP65/IP67 Manufacturer Warranty: 5 years Information on MEAN WELL HLG-40H-24A The MEAN WELL HLG-40H-24A is a reliable 40 W LED driver power supply featuring Constant Voltage + Constant Current (CV+CC) functionality and adjustable output (22–27 V), tailored for demanding LED applications. Its core strengths include a wide temperature range from -40 °C to +80 °C, IP65/IP67-certified metal housing for extreme weather exposure, and high efficiency up to 88.5 % for superior energy savings. Equipped with a universal input range of 90–305 V AC, rapid fault recovery, and exceptional longevity over 300,000 hours, it's outstanding for commercial lighting, outdoor installations, and industrial setups.

Technical Information & Details of the MEAN WELL PWM-40-24 LED Driver Output power: 40.08 W DC output voltage: 24 V DC Rated output current: 1.67 A Output type: Constant voltage PWM style output Dimming range: 0 – 100 % (3‑in‑1: 0–10 VDC, 10 V PWM signal, or resistance) PWM output frequency: approx. 1.47 kHz Overvoltage protection threshold: 28 – 34 V DC Setup / rise time: ≤ 500 ms, 80 ms @ 115 / 230 VAC (full load) Hold‑up time (typ.): approx. 16 ms @ 115 / 230 VAC (full load) Input voltage range: 90 – 305 V AC / 127 – 431 V DC, 47 – 63 Hz Power factor (typ.): PF > 0.97 @ 115 VAC, PF > 0.95 @ 230 VAC, PF > 0.92 @ 277 VAC (full load) Efficiency (typ.): approx. 89 % AC input current (typ.): 0.6 A @ 115 VAC / 0.3 A @ 230 VAC / 0.25 A @ 277 VAC Inrush current (typ.): cold start, 50 A @ 230 VAC (≈270 μs at 50 % Ipeak) Leakage current: < 0.25 mA @ 277 VAC Overload protection: 108 – 130 % of rated output power, hiccup mode, auto recovery Overvoltage protection: Shut down output voltage, re‑power on to recover Overtemperature protection: Shut down output voltage, re‑power on to recover Short‑circuit protection: Hiccup mode, auto recovery Operating temperature (case Tcase): −40 °C to +85 °C (see “Output load vs temperature” derating) Operating humidity: 20 – 95 % RH, non‑condensing Storage temperature / humidity: −40 °C to +80 °C, 10 – 95 % RH Temperature coefficient: ± 0.03 % / °C (0 – 50 °C) Vibration: 10 – 500 Hz, 5 G, 12 min./cycle, 72 min. along X, Y, Z axes Withstand voltage: 3.75 kVAC between input and output Isolation resistance: > 100 MΩ @ 500 V DC, 25 °C, 70 % RH Safety standards: UL8750 (type “HL”), UL879 (12 V, 24 V), CSA C22.2 No. 250.13‑12, ENEC EN 61347‑1, EN 61347‑2‑13 (independent), EN 62384, IS 15885 (12 V, 24 V), EAC TP TC 004, GB19510.1, GB19510.14; IP67 EMC emission: EN 55015, EN 61000‑3‑2 Class C (≥60 % load), EN 61000‑3‑3, GB/T 17743, GB17625.1, EAC TP TC 020 EMC immunity: EN 61000‑4‑2,3,4,5,6,8,11; EN 61547 (light industry level, surge Line–Line 2 kV), EAC TP TC 020 MTBF (typ.): 2,625,400 h (Telcordia SR‑332, 25 °C) / 226,400 h (MIL‑HDBK‑217F, 25 °C) Dimensions (L x W x H): 150 mm x 53 mm x 35 mm Weight: approx. 0.49 kg Case & protection: fully encapsulated plastic case, IP67, Class II No‑load power consumption: < 0.5 W Design: constant‑voltage PWM LED driver, Class 2, LPS Information about the MEAN WELL PWM-40-24 The MEAN WELL PWM‑40‑24 is a 40 W constant‑voltage LED driver with a PWM‑style output at around 1.47 kHz, designed to keep LED strip color temperature and brightness uniform throughout the entire dimming range. This makes it a strong choice for 24 V LED strips, indoor accent lighting, and architectural or decorative LED projects where visual consistency is essential. With typical efficiency up to 89 %, active power factor correction and a wide 90–305 V AC input range, the driver operates efficiently and can be deployed in worldwide installations. The fully encapsulated IP67 housing, wide −40 to +85 °C case temperature rating and comprehensive protection features (short‑circuit, overload, overvoltage and overtemperature in hiccup/shutdown mode) provide reliable operation in dry, damp and wet locations. The integrated 3‑in‑1 dimming interface (0–10 V, 10 V PWM signal, resistance) with dim‑to‑off capability offers excellent flexibility for modern control systems and building automation. Combined with extensive international safety and EMC certifications (including type “HL” for use in Class I, Division 2 hazardous locations), the PWM‑40‑24 is ideally suited for professional 24 V LED strip lighting in commercial and industrial environments.

Technical Information & Details for the Snappy SE15-24VF LED Driver Output Power: 15 W Output Voltage: 24 V DC Output Current: 0 – 0.625 A Input Voltage Range: 180 – 264 V AC, 47 – 63 Hz Efficiency: up to 85% Output Voltage Ripple: ≤ 4% (PK-PK) Inrush Current: max. 60 A @ 230 VAC (Cold Start) Standby Power Consumption: < 0.5 W (Typical 0.2 W) Operating Temperature: −20 °C to +45 °C Cooling: Natural cooling (fanless) Protection Functions: Short circuit, Overload, Over-voltage Power Factor: 0.80 (at 230 VAC full load) Isolation Voltage: 3200 V AC between Input and Output Dimensions (L x W x H): 103 mm x 35.5 mm x 16 mm Weight: ca. 50 g Safety & EMC Certificates: CE, TUV, UL/CUL, SAA, CCC Lifetime: 30,000 hours (@ Tc 75 °C) Manufacturer Warranty: 3 years Information about the Snappy SE15-24VF The Snappy SE15-24VF is a specialized indoor super slim constant voltage LED driver designed for environments where space is at a premium. With an incredibly low profile height of just 16 mm, this 15W power supply is the perfect solution for integration into bathroom mirror lamps, furniture lighting, and decorative fixtures that require a discreet form factor. Despite its compact size, it boasts a maximum conversion efficiency of 85% and features a high power factor with low total harmonic distortion, ensuring it meets the stringent EN61000-3-2 harmonic standards for modern electrical efficiency. Reliability is a core strength of the SE15-24VF, which includes an all-round protection suite covering short circuits, overloads, and over-voltage scenarios with an auto-recovery "hiccup mode" once faults are cleared. It is engineered for longevity, offering a 30,000-hour lifetime at maximum case temperature and a low standby power consumption that supports eco-friendly design goals. This driver is compliant with worldwide safety regulations, including SELV and MM markings, making it a safe and dependable choice for high-quality residential and commercial 24V LED installations.