PWM-200-12KN

Technical Information & Details of the MEAN WELL PWM-60-12KN LED Driver Output Power: 60 W Output Voltage: 12 V DC Output Current: 5 A Dimming Range: 0 – 100 % (PWM dimming) Minimum Dimming Level: 0.01 % PWM Output Frequency: 200 – 4,000 Hz, user‑changeable via ETS Input Voltage Range: 90 – 305 V AC / 127 – 431 V DC Input Frequency: 47 – 63 Hz Power Factor (typ.): > 0.97 @115 VAC, > 0.95 @230 VAC, > 0.92 @277 VAC (full load) Efficiency (typ.): approx. 86 % AC Input Current (typ.): 0.8 A @115 VAC / 0.4 A @230 VAC / 0.32 A @277 VAC Inrush Current (typ.): 50 A @230 VAC (cold start, twidth ≈350 μs, per NEMA 410) THD: < 20 % (≥60 % load @115 / 230 VAC; ≥75 % load @277 VAC) Standby Power Consumption: < 0.5 W Overload Protection: 108 – 130 % of rated power, hiccup mode, auto recovery Overvoltage Protection: shut down output, re‑power on to recover (typ. 15 – 17 V DC) Overtemperature Protection: shut down output, re‑power on to recover Short‑circuit Protection: hiccup mode, auto recovery Operating Temperature (case): −35 °C to +85 °C (derating according to “Output load vs. temperature” curve) Operating Humidity: 20 – 95 % RH, non‑condensing Storage Temperature / Humidity: −35 °C to +80 °C, 10 – 95 % RH Temperature Coefficient: ±0.03 % / °C (0 – 50 °C) Vibration Resistance: 10 – 500 Hz, 5 G, 12 min./cycle, 72 min. along each X, Y, Z axis Dielectric Strength: 3.75 kVAC (input–output) Isolation Resistance: > 100 MΩ @500 VDC, 25 °C, 70 % RH Safety Standards: ENEC EN 61347‑1, EN 61347‑2‑13, EN 62384 (independent), GB19510.1 / GB19510.14, BIS IS 15885 (Part 2/Sec 13 for 12/24 KN), EAC KNX Standards: Certified KNX protocol EMC Emission: EN 55015, EN 61000‑3‑2 Class C (≥60 % load), EN 61000‑3‑3, GB/T 17743, GB17625.1, EAC TP TC 020 EMC Immunity: EN 61000‑4‑2,3,4,5,6,8,11; EN 61547 (light industry level, 2 kV Line‑Line surge), EAC TP TC 020 MTBF (typ.): 2,135,200 h (Telcordia SR‑332, 25 °C) / 247,700 h (MIL‑HDBK‑217F, 25 °C) Dimensions (L x W x H): 150 mm x 53 mm x 35 mm Weight: approx. 0.45 kg Case & Protection: fully encapsulated plastic housing, IP67, Class II Cooling Method: fanless, free air convection Information about the MEAN WELL PWM-60-12KN The MEAN WELL PWM‑60‑12KN is a 60 W constant‑voltage LED driver with a 12 V DC PWM‑style output and a fully integrated KNX interface, designed for direct use on KNX building automation buses without the need for an external KNX‑DALI gateway. Its constant‑voltage PWM operation allows LED strips and 12 V constant‑voltage LED bulbs to maintain stable colour temperature and brightness uniformity across the entire length, even under deep dimming. One of the key strengths of the PWM‑60‑12KN is its very low minimum dimming level of 0.01 % combined with a user‑adjustable PWM frequency from 200 Hz up to 4 kHz via ETS, enabling configurations that comply with IEEE 1789‑2015 and EU Ecodesign SVM flicker requirements. With typical efficiency up to 86 %, a wide 90–305 V AC input range and a fanless, fully potted IP67 housing, the driver is well suited for long‑life use in indoor architectural, decorative and strip lighting applications where comfort and flicker‑free operation are critical. Another distinctive feature is the native KNX protocol implementation, which supports parameterisation and programming directly in ETS and even addressing/programming without AC mains connected, simplifying commissioning and maintenance. Together with its wide case temperature range from −35 °C to +85 °C, strong protection set and international approvals, the PWM‑60‑12KN provides a compact, reliable and KNX‑centric solution for 12 V LED strip lighting, indoor ambient lighting and other constant‑voltage LED applications in smart buildings.