IDLC-45-1400 End of Life

25W LED Schaltnetzteile 25W  Single Output LED Power Supply 

40W LED Schaltnetzteile 40W  Single Output LED Power Supply 

Technical Information & Details for the MEAN WELL ELG-75-12DA Power Supply Output Power: 60 W Output Voltage: 12 V DC Output Current: 5 A Constant Current Region: 6 – 12 V DC Input Voltage Range: 100 – 305 V AC / 142 – 431 V DC, 47 – 63 Hz Efficiency: up to 86 % Ripple & Noise: ≤ 150 mVp-p Inrush Current: max. 50 A @ 230 VAC No Load Power Consumption: < 0.5 W Operating Temperature: −40 °C to +85 °C (Case Temperature) Cooling: fanless natural convection Protections: Short circuit, Over current, Over voltage, Over temperature (auto recovery) Isolation Voltage: 3750 V AC between Input and Output Ingress Protection: IP65 metal housing Dimensions (L x W x H): 180 mm x 63 mm x 35.5 mm Weight: approx. 800 g Safety & EMC Certificates: UL8750, EN61347, IEC62386, CE, EAC, KC Special Features: DALI-2 interface, IEC62386-101/102/207 compliant, digital addressable Manufacturer Warranty: 5 Years Information about the MEAN WELL ELG-75-12DA The MEAN WELL ELG-75-12DA is a cutting-edge DALI-2 certified LED driver designed for the most advanced smart lighting ecosystems, delivering precise 60W constant voltage/current output at 12V DC / 5A with full digital controllability. As a dedicated "DA-Type" model, it features a robust DALI-2 interface compliant with IEC62386 standards (101, 102, 207), supporting up to 16 groups and 64 unique addresses for seamless integration into centralized lighting management systems. Its rugged IP65-rated metal housing combined with an expansive 100-305V AC input range and extreme thermal resilience from -40°C to +85°C case temperature make it exceptionally suited for commercial buildings, office spaces, hotels, and large-scale architectural installations requiring network-addressable control and high reliability. The standout strength of the ELG-75-12DA power supply lies in its intelligent, future-proof digital protocol support that enables sophisticated functions like group dimming, scene setting, and broadcast commands without complex wiring. With an optimized 86% efficiency, minimal no-load power under 0.5W, and active PFC for superior power quality, it minimizes energy waste while delivering rock-solid performance backed by comprehensive auto-recovery protections against short circuits, overcurrent, overvoltage, and overtemperature. Fully adhering to stringent global safety and EMC norms, this driver offers a typical lifespan exceeding 50,000 hours and is protected by MEAN WELL's comprehensive 5-year manufacturer warranty, positioning it as the premium choice for scalable, IoT-ready LED lighting networks in modern smart environments.

Technical Specifications & Details for MEAN WELL ELG-75-24DA-3Y Power Supply Output Power: 75.6 W Output Voltage: 24 V DC Output Current: 3.15 A Input Voltage Range: 100 – 305 V AC / 142 – 431 V DC, 47 – 63 Hz Efficiency: up to 88 % Ripple & Noise: ≤ 200 mVp-p Inrush Current: max. 50 A / 500 ms @ 230 VAC No-Load Power Consumption: < 0.5 W Operating Temperature: −40 °C to +85 °C (Case) Cooling: fanless natural convection Protection Functions: Short Circuit (Hiccup), Overload, Overvoltage, Over Temperature (Auto-Recovery) Overvoltage Category: OVC II Isolation Voltage: 3.75 kV AC IP-OP, 2 kV AC IP-FG, 1.5 kV AC OP-FG Dimensions (L x W x H): 180 mm x 63 mm x 35.5 mm Weight: ca. 800 g Safety & EMC Certifications: CE, UL8750, IEC/EN 61347-1/-2-13, IP67, EAC, DALI LED Indicator: none Manufacturer Warranty: 3 Years Information on MEAN WELL ELG-75-24DA-3Y The MEAN WELL ELG-75-24DA-3Y is a professional DALI-compatible 75 W LED driver power supply from the DA-Series featuring full support for IEC62386 DALI protocol (16 groups, 64 addresses) for intelligent lighting control in modern buildings. The universal input voltage range 100–305 V AC with integrated active PFC circuit and DC compatibility offers global flexibility, while achieving 88 % efficiency and standby consumption below 0.5 W meets the highest energy standards. The IP67-certified aluminum housing with 3-wire protective earth cable ensures complete protection in the most demanding outdoor and industrial environments. With -40 °C to +85 °C case temperature range, 6kV surge immunity, and fanless convection cooling, it enables reliable continuous operation under extreme conditions. SELV-compliant protection circuits with automatic recovery and comprehensive certifications including UL8750, IEC/EN 61347-1/-2-13 plus EMC standards EN55015 make it the ideal partner for smart office lighting, hotel lighting, retail lighting, and centralized DALI lighting management systems. The 3-year manufacturer warranty guarantees long-term operational reliability of this forward-thinking DALI LED driver.

Technische Eigenschaften des MEAN WELL ELG-100-24DA-3Y Leistung: 96W Aluminiumgehäuse Integriertes PFC Standby Ladeverbrauch <0,5W IP67 DALI Mit PE (Varianten ohne 3Y: PE am Gehäuse!) Allgemeine Lebensdauer >50.000Std. 5 Jahre Garantie Produktbeschreibung zur MEAN WELL ELG-100 Serie Bei der MEAN WELL ELG-100 Serie handelt es sich um 100W AC/DC LED Netzteile, die im dualen Modus einen Konstantstrom- und Konstantspannungsausgang unterstützen. Die ELG-100 Netzteile arbeiten mit einem 180~295VAC Eingangsbereich und bieten verschiedene Ausgangsspannungen im Bereich von 24V bis 54V an. Dank des 91% hohem Wirkungsgrads und dem lüfterlosen Design kann die Serie unter freier Luftkonvektion im Temperaturbereich von -40°C bis +90°C betrieben werden. Durch das verwendete Aluminiumgehäuse und den Schutzklassen IP65/67 finden MEAN WELL ELG-100 Netzteile Anwendung sowohl Indoor-, als auch im Outdoorbereich. Die Serie verfügt weiterhin über verschiedene zusätzliche Funktionen, wie 3 in 1 Dimmung, Smart-Timer-Dimmung oder DALI, welche eine hohe Flexibilität in LED Beleuchtungsanwendungen garantieren.