Technical Information & Details about the MEAN WELL HDR-100-24N Power Supply Output Power: 100.8 W Output Voltage: 24 V DC (nominal) Output Current: 4.2 A Current Range: 0 – 4.2 A Input Voltage Range: 85 – 264 V AC (277 V AC operational) / 120 – 370 V DC (390 V DC operational), 47 – 63 Hz Efficiency: typ. 90 % Ripple & Noise: ≤ 150 mVp-p Output Voltage Adjustment Range: 21.6 – 29 V DC (extended Non‑LPS range) Voltage Tolerance: ±2.0 % Line Regulation: ±1.0 % Load Regulation: ±1.0 % Setup, Rise Time: 500 ms, 60 ms @230 V AC / 115 V AC (full load) Hold-up Time: 30 ms @230 V AC / 12 ms @115 V AC (full load) AC Input Current (typ.): 3 A @115 V AC / 1.6 A @230 V AC Inrush Current: 35 A @115 V AC / 70 A @230 V AC (cold start) No-load Power Consumption: < 0.3 W Operating Temperature: −30 °C to +70 °C (with derating according to curve) Operating Humidity: 20 – 90 % RH, non‑condensing Storage Conditions: −40 °C to +85 °C, 10 – 95 % RH, non‑condensing Cooling: fanless free air convection Protection Features: short circuit (hiccup mode, auto recovery), overload (constant current limiting within 50–100 % of rated output voltage, auto recovery), overvoltage (shut down, re‑power to recover) Overvoltage Protection Threshold: 30 – 36 V DC Overvoltage Category: OVC III (up to 2000 m altitude) Isolation Voltage: 4000 V AC between input and output Isolation Resistance: ≥ 100 MΩ @ 500 V DC, 25 °C, 70 % RH Dimensions (W x H x D): 70 mm x 90 mm x 54.5 mm Weight: approx. 270 g Housing Material: insulating plastic housing, Class II, ultra‑slim 4‑SU step‑shape Mounting: DIN rail TS35/7.5 or TS35/15 Vibration Resistance: 10 – 500 Hz, 2 G, 60 min per axis (X, Y, Z) Safety & EMC Certificates: UL 62368‑1, UL 508, TUV BS EN/EN 61558‑2‑16, BS EN/EN 61558‑1, IEC 62368‑1, EAC TP TC 004, BSMI CNS15598‑1, BIS IS13252, compliant with BS EN/EN 55032, BS EN/EN 55035, BS EN/EN 61000‑6‑2, BS EN/EN 61204‑3 LPS Classification: Non‑LPS (extended adjustment range, higher usable output power up to 100.8 W) LED Indicator: Power‑On status LED Manufacturer Warranty: 3 years About the MEAN WELL HDR-100-24N The MEAN WELL HDR-100-24N is the Non‑LPS version of the HDR‑100‑24 models and delivers up to 100.8 W at 24 V DC and 4.2 A in an ultra‑slim 70 mm DIN‑rail housing. Its extended 21.6–29 V adjustment range offers additional voltage headroom for long cable runs, inductive loads and demanding 24 V control circuits, going well beyond the tighter LPS‑compliant window of “blank” units. Combined with universal input, high efficiency, fanless free air convection, comprehensive protection features and broad safety/EMC approvals, HDR-100-24N is a powerful, flexible 24 V supply for industrial control systems, building automation, valves, relays, sensors and OEM applications that must fully utilize the 100 W class.

Technische Eigenschaften des MEAN WELL PLN-100-24 Leistung: 96W Universeller AC Eingang/ Breiter Eingangsbereich von 90 bis 264VAC Schutz vor Kurzschluss/ Überstrom/ Überspannung/ Überhitzung Kühlung durch freie Luftkonvektion Eingebaute Konstantstrombegrenzungsschaltung mit einstellbarem OCP Level Vollständig isoliertes Plastikgehäuse Integrierte, aktive PFC-Funktion IP64 Design für Indoor und Outdoor Installationen Schmale und kompakte Größe Class II Schaltnetzteil/ kein FG 100% Volllast burn-in Test Hohe Zuverlässigkeit, niedrige Kosten: bestes Preis-Leistungsverhältnis Geeignet für feuchte/ nasse Umgebung Geeignet für LED Beleuchtungen und LED Displays 2 Jahre Garantie

Technical Specifications & Details for MEAN WELL ELG-75-24DA-3Y Power Supply Output Power: 75.6 W Output Voltage: 24 V DC Output Current: 3.15 A Input Voltage Range: 100 – 305 V AC / 142 – 431 V DC, 47 – 63 Hz Efficiency: up to 88 % Ripple & Noise: ≤ 200 mVp-p Inrush Current: max. 50 A / 500 ms @ 230 VAC No-Load Power Consumption: < 0.5 W Operating Temperature: −40 °C to +85 °C (Case) Cooling: fanless natural convection Protection Functions: Short Circuit (Hiccup), Overload, Overvoltage, Over Temperature (Auto-Recovery) Overvoltage Category: OVC II Isolation Voltage: 3.75 kV AC IP-OP, 2 kV AC IP-FG, 1.5 kV AC OP-FG Dimensions (L x W x H): 180 mm x 63 mm x 35.5 mm Weight: ca. 800 g Safety & EMC Certifications: CE, UL8750, IEC/EN 61347-1/-2-13, IP67, EAC, DALI LED Indicator: none Manufacturer Warranty: 3 Years Information on MEAN WELL ELG-75-24DA-3Y The MEAN WELL ELG-75-24DA-3Y is a professional DALI-compatible 75 W LED driver power supply from the DA-Series featuring full support for IEC62386 DALI protocol (16 groups, 64 addresses) for intelligent lighting control in modern buildings. The universal input voltage range 100–305 V AC with integrated active PFC circuit and DC compatibility offers global flexibility, while achieving 88 % efficiency and standby consumption below 0.5 W meets the highest energy standards. The IP67-certified aluminum housing with 3-wire protective earth cable ensures complete protection in the most demanding outdoor and industrial environments. With -40 °C to +85 °C case temperature range, 6kV surge immunity, and fanless convection cooling, it enables reliable continuous operation under extreme conditions. SELV-compliant protection circuits with automatic recovery and comprehensive certifications including UL8750, IEC/EN 61347-1/-2-13 plus EMC standards EN55015 make it the ideal partner for smart office lighting, hotel lighting, retail lighting, and centralized DALI lighting management systems. The 3-year manufacturer warranty guarantees long-term operational reliability of this forward-thinking DALI LED driver.

Technical Information & Details for MEAN WELL ELG-150-24A-3Y LED Driver Output Power: 150 W (at 200 – 305 V AC) / 105 W (at 100 – 180 V AC) Output Voltage: 24 V DC (Constant current region: 12 – 24 V) Rated Current: 6.25 A Voltage Adjustment Range: 21.6 – 26.4 V (via internal potentiometer) Current Adjustment Range: 3.2 – 6.25 A (via internal potentiometer) Input Cable Option (-3Y): 3-wire AC input cable with Protective Earth (PE) ground wire (Class I) Ripple & Noise (max.): ≤ 200 mVp-p Voltage Tolerance: ±2.0% Input Voltage Range: 100 – 305 V AC / 142 – 431 V DC Efficiency (Typ.): 88.5% Power Factor (PF): PF ≥ 0.97 at 115 V AC / PF ≥ 0.95 at 230 V AC / PF ≥ 0.92 at 277 V AC (at full load) Ingress Protection: IP65 (suitable for indoor and outdoor installations) Operating Temperature: Tcase −40 °C to +90 °C (max. case temperature +90 °C) Cooling: Fanless free air convection Protections: Over current (95 – 108%, constant current limiting), Short circuit (hiccup mode), Over voltage (28 – 34 V), Over temperature Form Factor / Housing: Metal housing design with 3-core input cable (Class I) Dimensions (L x W x H): 219 mm x 63 mm x 35.5 mm Weight: Approx. 0.95 kg Manufacturer Warranty: 5 Years Information about MEAN WELL ELG-150-24A-3Y The MEAN WELL ELG-150-24A-3Y is a high-performance 150W AC/DC LED power supply featuring dual mode constant voltage and constant current output. Housed in a durable metal casing, it accepts a wide input voltage range of 100 to 305 V AC and provides a 24 V DC output with a rated current of up to 6.25 A (150 W output at 200–305 V AC). As an A-Type model, it features an IP65 rating and built-in potentiometers for adjusting both output voltage (21.6 to 26.4 V) and current (3.2 to 6.25 A). The -3Y designation indicates a factory-fitted 3-core AC input cable including dedicated Protective Earth ground for European compliance. Designed with fanless free air convection cooling, it operates efficiently across case temperatures ranging from −40 °C to +90 °C, making it suitable for indoor and outdoor installations such as LED street lighting, architectural lighting, and floodlighting. Equipped with active PFC, built-in protection circuitry, and a lifetime expectancy exceeding 50,000 hours, it is backed by a 5-year manufacturer warranty.

Technical Specifications & Details for MEAN WELL ELG-75-24A-3Y Power Supply Output Power: 75.6 W Output Voltage: 24 V DC (adjustable 21.6–26.4 V) Output Current: 3.15 A (adjustable 1.57–3.15 A) Input Voltage Range: 100 – 305 V AC / 142 – 431 V DC, 47 – 63 Hz Efficiency: up to 88 % Ripple & Noise: ≤ 200 mVp-p Inrush Current: max. 50 A / 500 ms @ 230 VAC No-Load Power Consumption: < 0.5 W Operating Temperature: −40 °C to +85 °C (Case) Cooling: fanless natural convection Protection Functions: Short Circuit (Hiccup), Overload, Overvoltage, Over Temperature (Auto-Recovery) Overvoltage Category: OVC II Isolation Voltage: 3.75 kV AC IP-OP, 2 kV AC IP-FG, 1.5 kV AC OP-FG Dimensions (L x W x H): 180 mm x 63 mm x 35.5 mm Weight: ca. 800 g Safety & EMC Certifications: CE, UL8750, IEC/EN 61347-1/-2-13, IP65, EAC LED Indicator: none Manufacturer Warranty: 3 Years Information on MEAN WELL ELG-75-24A-3Y The MEAN WELL ELG-75-24A-3Y is a highly versatile 75 W LED driver power supply from the A-Series featuring adjustable output voltage (21.6–26.4 V) and adjustable current range (1.57–3.15 A) via built-in potentiometer for maximum customization to specific LED requirements. With universal input voltage range 100–305 V AC and DC compatibility, it offers worldwide deployment flexibility, while delivering 88 % efficiency and no-load consumption below 0.5 W to meet the highest energy standards. The rugged metal housing with IP65 protection ensures reliable operation in demanding indoor and outdoor environments. The extreme operating temperature range from -40 °C to +85 °C case temperature combined with fanless convection cooling enables maintenance-free continuous operation even under the harshest conditions. Intelligent protection features with hiccup mode and automatic recovery along with comprehensive certifications including UL8750, IEC/EN 61347, and IP65 make it perfect for professional LED panel lighting, floodlight systems, commercial lighting, and industrial LED applications. The 3-year manufacturer warranty confirms the premium quality of this adaptable and durable LED driver.

Technical Information & Details about the MEAN WELL HDR-60-12 Power Supply Output Power: 60 W Output Voltage: 12 V DC Output Current: 4,5 A Current Range: 0 – 4,5 A Input Voltage Range: 85 – 264 V AC (277 V AC operational) / 120 – 370 V DC (390 V DC operational), 47 – 63 Hz Efficiency: up to 88 % Ripple & Noise: ≤ 120 mVp-p Output Voltage Adjustment Range: 10,8 – 13,8 V DC Voltage Tolerance: ±1,0 % Line Regulation: ±1,0 % Load Regulation: ±1,0 % Setup, Rise Time: 500 ms, 50 ms @230 V AC / 115 V AC (full load) Hold-up Time: 30 ms @230 V AC / 12 ms @115 V AC (full load) Inrush Current: 30 A @115 V AC / 60 A @230 V AC (cold start) No-load Power Consumption: < 0.3 W Operating Temperature: −30 °C to +70 °C (with derating according to curve) Cooling: fanless free air convection Protection Functions: short circuit (hiccup mode, auto recovery), overload (constant current limiting 50–100 % of rated output voltage, auto recovery), overvoltage (shut down, re‑power to recover) Overvoltage Category: OVC III (up to 2000 m altitude) Isolation Voltage: 4000 V AC between input and output Isolation Resistance: ≥ 100 MΩ @ 500 V DC, 25 °C, 70 % RH Dimensions (W x H x D): 52,5 mm x 90 mm x 54,5 mm Weight: approx. 190 g Housing Material: insulating plastic, Class II, ultra-slim step-shape Mounting: DIN rail TS35/7,5 or TS35/15 Safety & EMC Certifications: IEC 62368-1, UL 62368-1, UL 508, TUV BS EN/EN 61558-2-16, BS EN/EN 61558-1, EAC TP TC 004, BSMI, BIS IS13252, compliant with BS EN/EN 55032, BS EN/EN 55035, BS EN/EN 61000-6-2, BS EN/EN 61204-3 LED Indicator: Power On LED indicator Manufacturer Warranty: 3 years About the MEAN WELL HDR-60-12 The MEAN WELL HDR-60-12 is a 60 W ultra-slim DIN-rail power supply that delivers a robust 12 V DC / 4,5 A output in a compact 52,5 mm wide step-shape housing, ideal for space-constrained distribution boards and industrial control cabinets. Its wide 85–264 V AC / 120–370 V DC input range and high efficiency up to 88 % support energy-efficient operation in building automation, home automation, and industrial control environments. The adjustable 10,8–13,8 V output range allows precise tuning of the 12 V bus to compensate for line voltage drops, ensuring reliable supply for relays, actuators, sensors, and control electronics. The Class II plastic enclosure provides reinforced insulation and eliminates the need for a protective earth connection, which improves electrical safety and simplifies installation. With fanless free air convection, low no-load power consumption below 0.3 W, a wide operating temperature range from −30 °C to +70 °C, and comprehensive protection and certification features, the HDR-60-12 is a durable, low-maintenance 12 V power solution for demanding household and industrial automation projects.