Technical Information & Details about the MEAN WELL HDR-60-12 Power Supply Output Power: 60 W Output Voltage: 12 V DC Output Current: 4,5 A Current Range: 0 – 4,5 A Input Voltage Range: 85 – 264 V AC (277 V AC operational) / 120 – 370 V DC (390 V DC operational), 47 – 63 Hz Efficiency: up to 88 % Ripple & Noise: ≤ 120 mVp-p Output Voltage Adjustment Range: 10,8 – 13,8 V DC Voltage Tolerance: ±1,0 % Line Regulation: ±1,0 % Load Regulation: ±1,0 % Setup, Rise Time: 500 ms, 50 ms @230 V AC / 115 V AC (full load) Hold-up Time: 30 ms @230 V AC / 12 ms @115 V AC (full load) Inrush Current: 30 A @115 V AC / 60 A @230 V AC (cold start) No-load Power Consumption: < 0.3 W Operating Temperature: −30 °C to +70 °C (with derating according to curve) Cooling: fanless free air convection Protection Functions: short circuit (hiccup mode, auto recovery), overload (constant current limiting 50–100 % of rated output voltage, auto recovery), overvoltage (shut down, re‑power to recover) Overvoltage Category: OVC III (up to 2000 m altitude) Isolation Voltage: 4000 V AC between input and output Isolation Resistance: ≥ 100 MΩ @ 500 V DC, 25 °C, 70 % RH Dimensions (W x H x D): 52,5 mm x 90 mm x 54,5 mm Weight: approx. 190 g Housing Material: insulating plastic, Class II, ultra-slim step-shape Mounting: DIN rail TS35/7,5 or TS35/15 Safety & EMC Certifications: IEC 62368-1, UL 62368-1, UL 508, TUV BS EN/EN 61558-2-16, BS EN/EN 61558-1, EAC TP TC 004, BSMI, BIS IS13252, compliant with BS EN/EN 55032, BS EN/EN 55035, BS EN/EN 61000-6-2, BS EN/EN 61204-3 LED Indicator: Power On LED indicator Manufacturer Warranty: 3 years About the MEAN WELL HDR-60-12 The MEAN WELL HDR-60-12 is a 60 W ultra-slim DIN-rail power supply that delivers a robust 12 V DC / 4,5 A output in a compact 52,5 mm wide step-shape housing, ideal for space-constrained distribution boards and industrial control cabinets. Its wide 85–264 V AC / 120–370 V DC input range and high efficiency up to 88 % support energy-efficient operation in building automation, home automation, and industrial control environments. The adjustable 10,8–13,8 V output range allows precise tuning of the 12 V bus to compensate for line voltage drops, ensuring reliable supply for relays, actuators, sensors, and control electronics. The Class II plastic enclosure provides reinforced insulation and eliminates the need for a protective earth connection, which improves electrical safety and simplifies installation. With fanless free air convection, low no-load power consumption below 0.3 W, a wide operating temperature range from −30 °C to +70 °C, and comprehensive protection and certification features, the HDR-60-12 is a durable, low-maintenance 12 V power solution for demanding household and industrial automation projects.

Technical Information & Details about the MEAN WELL HDR-100-24 Power Supply Output Power: 92 W Output Voltage: 24 V DC Output Current: 3.83 A Current Range: 0 – 3.83 A Input Voltage Range: 85 – 264 V AC (277 V AC operational) / 120 – 370 V DC (390 V DC operational), 47 – 63 Hz Efficiency: up to 90 % Ripple & Noise: ≤ 150 mVp-p Output Voltage Adjustment Range (LPS type): 24 – 25.5 V DC Extended Adjustment Range (Non‑LPS “N” type): 21.6 – 29 V DC Voltage Tolerance: ±2.0 % Line Regulation: ±1.0 % Load Regulation: ±1.0 % Setup, Rise Time: 500 ms, 60 ms @230 V AC / 115 V AC (full load) Hold-up Time: 30 ms @230 V AC / 12 ms @115 V AC (full load) AC Input Current (typ.): 3 A @115 V AC / 1.6 A @230 V AC Inrush Current: 35 A @115 V AC / 70 A @230 V AC (cold start) No-load Power Consumption: < 0.3 W Operating Temperature: −30 °C to +70 °C (with derating according to curve) Operating Humidity: 20 – 90 % RH, non‑condensing Storage Conditions: −40 °C to +85 °C, 10 – 95 % RH, non‑condensing Cooling: fanless free air convection Protection Features: short circuit (hiccup mode, auto recovery), overload (constant current limiting within 50–100 % of rated output voltage, auto recovery), overvoltage (shut down, re‑power to recover) Overvoltage Protection Threshold: 30 – 36 V DC Overvoltage Category: OVC III (up to 2000 m altitude) Isolation Voltage: 4000 V AC between input and output Isolation Resistance: ≥ 100 MΩ @ 500 V DC, 25 °C, 70 % RH Dimensions (W x H x D): 70 mm x 90 mm x 54.5 mm Weight: approx. 270 g Housing Material: insulating plastic housing, Class II, ultra‑slim 4‑SU step‑shape Mounting: DIN rail TS35/7.5 or TS35/15 Vibration Resistance: 10 – 500 Hz, 2 G, 60 min per axis (X, Y, Z) Safety & EMC Certificates: UL 62368‑1, UL 508, TUV BS EN/EN 61558‑2‑16, BS EN/EN 61558‑1, IEC 62368‑1, EAC TP TC 004, BSMI CNS15598‑1, BIS IS13252, compliant with BS EN/EN 55032, BS EN/EN 55035, BS EN/EN 61000‑6‑2, BS EN/EN 61204‑3 LPS Classification: Pass LPS for “blank” models (up to 92 W, narrower adjustment range), Non‑LPS for “N” models (up to 100.8 W with wider adjustment range) LED Indicator: Power‑On status LED Manufacturer Warranty: 3 years About the MEAN WELL HDR-100-24 The MEAN WELL HDR-100-24 is an ultra‑slim 100 W class DIN‑rail power supply that provides a regulated 24 V DC output at up to 3.83 A in a compact 70 mm (4 SU) housing, ideal for space‑constrained 24 V control panels. With a universal input range, high efficiency up to 90 %, very low no‑load consumption and fanless free air convection, it delivers an energy‑efficient 24 V bus for building automation, household control systems and industrial control cabinets. LPS‑compliant “blank” models with a tighter adjustment window and higher‑power “N” versions with an extended adjustment range up to 29 V give designers flexibility between safety classification and additional voltage headroom. Together with the Class II plastic enclosure, comprehensive protection features and broad international approvals, HDR-100-24 is a robust, low‑maintenance 24 V power solution for PLCs, I/O modules, valves, relays and other 24 V control electronics.

For Trucki application with current firmware Technical Specifications & Details for MEAN WELL NPB-1700-24 Charger Maximum Output Power: 1680 W Nominal Output Voltage: 24 V DC Charging Voltage Range: 21 V – 42 V (Adjustable) Maximum Charging Current: 50 A Input Voltage Range: 90 – 264 V AC / 127 – 370 V DC, 47 – 63 Hz Efficiency: Up to 93 % Power Factor: PF > 0.98 / 115 VAC (Full Load) Recommended Battery Capacity: 200 – 640 Ah Operating Temperature: −30 °C to +70 °C Cooling: Thermal controlled DC fan for noise reduction Protection Functions: Short circuit, Over voltage, Over temperature, Battery under voltage, Reverse polarity Communication: Built-in CANBus protocol for control, setting, and monitoring Charging Stages: Selectable 2 or 3-stage charging curves Dimensions (L x W x H): 307.7 mm x 184 mm x 70 mm Weight: Approx. 2.96 kg Safety Standards: CB, DEKRA, UL62368-1, EN60335-1/-2-29, CE, EAC LED Indicator: Multi-color status LED (Charging, Full, Abnormal) Manufacturer Warranty: 3 Years Information about the MEAN WELL NPB-1700-24 The MEAN WELL NPB-1700-24 is a state-of-the-art 1680W intelligent battery charger that combines high power density with a fully digital control architecture. Its core strength is the ultra-wide output range, supported by advanced auto-ranging technology that detects the connected battery voltage and optimizes the charging curve automatically for various chemistries, including Li-ion and Lead-acid (Flooded, Gel, AGM). Designed for professional integration, it features a built-in CANBus 2.0B interface, allowing for remote monitoring and precise digital configuration of charging parameters via the SBP-001 programmer. The unit provides exceptional user control through front-panel DIP switches, enabling quick selection between 2-stage or 3-stage charging and four pre-defined curves to suit specific application needs. With a robust design capable of operating in harsh environments from -30 °C up to +70 °C, the NPB-1700-24 ensures reliability through a smart temperature-controlled cooling fan and comprehensive protections like battery reverse polarity without damage. This universal charger is perfectly suited for high-demand sectors such as automated guided vehicles (AGVs), telecommunication base stations, maritime equipment, and industrial backup systems, backed by a 3-year manufacturer warranty.

50W Schaltnetzteile 50W Single Output Switching Power Supply