Skip to main content
Go to homepage

GST60A24-P1J

Product information "GST60A24-P1J"

Technical Information & Details for MEAN WELL GST60A24-P1J Power Supply

  • Output Power: 60 W
  • Output Voltage: 24 V DC
  • Output Current: 2.5 A
  • Input Voltage Range: 90 – 264 V AC, 47 – 63 Hz
  • Efficiency: 90 %
  • Ripple & Noise: ≤ 150 mVp-p
  • Inrush Current: max. 35 A @115 VAC / 65 A @230 VAC
  • No-load Power Consumption: < 0.075 W
  • Operating Temperature: −30 °C to +70 °C
  • Cooling: Fanless natural convection
  • Protections: Short circuit, Overload, Over voltage, Over temperature
  • Overvoltage Category: Class I power unit (with FG)
  • Isolation Voltage: 3000 V AC primary to secondary
  • Dimensions (L x W x H): 125 mm x 50 mm x 31.5 mm
  • Weight: approx. 305 g
  • Safety & EMC Certificates: UL62368-1, TUV BS EN/EN62368-1, CE, FCC, EAC, BSMI, PSE, CB
  • LED Indicator: Power On Indicator
  • Manufacturer Warranty: 3 Years

Information about MEAN WELL GST60A24-P1J

The MEAN WELL GST60A24-P1J is a highly reliable 60-watt desktop green power adapter designed to deliver efficient power for industrial control systems, commercial electronics, and automation equipment. Operating across a wide universal AC input range from 90 to 264 V AC, it yields a regulated 24 V DC output at up to 2.5 A rated current. A defining highlight of this power adapter is its superior energy management, achieving an extremely low no-load power consumption below 0.075 W alongside an impressive 90% efficiency rating. This guarantees full compliance with global efficiency standards, including Energy Efficiency Level VI, USA EISA 2007/DoE, and EU ErP directives inside a fully enclosed 94V-0 flame-retardant case.

Engineered for continuous commercial operation, the unit withstands demanding environments with a broad operating temperature range from -30 °C to +70 °C relying entirely on silent, fanless natural convection cooling. Comprehensive internal protections safeguard both the power supply and connected loads against short circuit, overload, overvoltage, and overtemperature conditions with automatic recovery. Power entry is provided via a standard 3-pole IEC320-C14 AC inlet, while the DC output utilizes a widely compatible P1J tuning fork plug (2.1 mm x 5.5 mm). An integrated LED power-on indicator provides immediate visual status verification for seamless field diagnostics.


Verfügbare Downloads
Download GST60A Datenblatt
Eigenschaften für "GST60A24-P1J"
Approval: CB, CE, MOPP, TÜV, UL
Efficiency: 90,5 %
Energy Efficiency Level: VI
Height: 31,5
Length: 125
Protection Class: Class I
Rated current: 2,5
Series: GST
Voltage: 24 VDC
Warranty: 3 years
Wattage: 60 W
Weight: 0,305kg
Width: 50

Cutsomers also bought

LPC-20-700
Technische Eigenschaften des MEAN WELL LPC-20-700 Leistung: 21 W Eingangsbereich: 90 - 264 VAC Konstantstrom: 0,7 A 300 VAC Spannungsschwankungen widerstehen Class 2 Stromversorgung / Class II Netzteil  Schutzart IP 67 Kühlung durch freie Luftkonvektion Kurzschlussfest Schutz vor Überspannung Informationen zum MEAN WELL LPC-20-700 Beim Mean Well LPC-20-700 handelt es sich um ein kompaktes und robustes LED-Schaltnetzteil mit einer konstanten Stromausgabe (Constant Current) von 0,7 A. Dieses Netzgerät kann mit einem weltweit anwendbaren Weitbereichseingang (90 – 264 VAC) mit Derating zwischen 90 und 100 VAC gespeist werden und erzeugt eine geregelte Nennleistung von 21 W. Die LPC-20-Serie von MeanWell zeichnet sich vor allem durch die Widerstandsfähigkeit aus und kann 300 VAC Spannungsschwankungen für bis zu fünf Sekunden widerstehen.  Mit der Schutzart IP67 im Kunststoffgehäuse eignen sich die Class II Netzgeräte der Mean Well LPC-20-Serie für die Versorgung von LED-Beleuchtungsanlagen sowohl der Innen- als auch der Außenanwendung ohne direkte Sonnenstrahlung. Vorranggig sind die LED-Netzteile der LPC-20 Serie von MeanWell speziell für den Einbau in Endgeräten vorgesehen, beispielsweise für LED-Dekoration und LED-Anzeigegeräte/-tafeln. Die konvektionsgekühlte Produktreihe kann weiterhin mit der lüfterlosen Bauweise einen energieeffizienten und geräuscharmen Betrieb gewährleisten. Dabei arbeiten die LED-Netzteile der LPC-20-Serie bei Arbeitstemperaturen von -30 bis +70°C (Derating ab +60°C) sowie bei relativer Luftfeuchtigkeit zwischen 20% und 90%. Nicht zuletzt verfügen die Mean Well LPC-20-Modelle am Ausgang über einen Schutz gegen Kurzschluss und Überspannung. Die Produktserie von MeanWell erfüllt zudem den Sicherheitsstandard für Class 2 Stromversorgung (UL1310) sowie die regulatorischen Anforderung für LED-Schaltnetzteile (UL879, EN55032 Class B, EN61000-3-3). Nur für den Einbau in Geräten, die einen anderen Primärgebrauch aufweisen als die Beleuchtung, z. B.Kopiergeräte, Overhead- und Diaprojektoren oder für Skalen- und Anzeigebeleuchtung

from €7.70*
HDR-15-24
Technical Information & Details of the MEAN WELL HDR-15-24 Power Supply Output Power: 15.2 W Output Voltage: 24 V DC Output Current: 0.63 A Output Current Range: 0 – 0.63 A Output Voltage Adjustment Range: 21.6 – 29 V DC Ripple & Noise: ≤ 150 mVp-p Voltage Tolerance: ±1.0 % Line Regulation: ±1.0 % Load Regulation: ±1.0 % Input Voltage Range: 85 – 264 V AC (277 V AC operational) / 120 – 370 V DC (390 V DC operational) Input Frequency: 47 – 63 Hz Efficiency (typ.): 86 % AC Input Current (typ.): 0.5 A @115 V AC / 0.25 A @230 V AC Inrush Current (typ.): 25 A @115 V AC / 45 A @230 V AC (cold start) No-load Power Consumption: < 0.3 W Overload Protection: 110 – 145 % of rated power, constant current limiting within 50 – 100 % of rated output voltage, hiccup mode when Vout < 50 %, auto recovery Overvoltage Protection: 30 – 36 V DC, shut off output, clamping by zener diode Operating Temperature: −30 °C to +70 °C (derating according to curve) Operating Humidity: 20 – 90 % RH, non-condensing Storage Temperature / Humidity: −40 °C to +85 °C, 10 – 95 % RH, non-condensing Temperature Coefficient: ±0.03 % / °C (0 – 50 °C) Vibration Resistance: 10 – 500 Hz, 2 G, 10 min./cycle, 60 min. per axis (X, Y, Z) Operating Altitude: up to 2,000 m (derating above 2,000 m) Isolation Voltage: 4 kVAC (input–output) Isolation Resistance: > 100 MΩ @500 VDC, 25 °C, 70 % RH Dimensions (W x H x D): 17.5 mm x 90 mm x 54.5 mm Weight: approx. 74 g Mounting: DIN rail TS35/7.5 or TS35/15, ultra-slim 1-SU step-shape housing Housing / Isolation Class: plastic housing, isolation Class II, LPS (Limited Power Source) Front Indicators / Controls: LED indicator for power on, adjustable DC output voltage Safety Approvals: UL62368‑1, UL508, TUV BS EN/EN61558‑2‑16, BS EN/EN61558‑1, IEC62368‑1, EAC TP TC 004, BSMI CNS15598‑1, BIS IS13252 (Part1) (except 48 V) EMC Emission: EN55032 (CISPR32), CNS15936 Class B; EN61000‑3‑2, EN61000‑3‑3 EMC Immunity: EN55035, EN61000‑6‑2, EN61204‑3; EN61000‑4‑2/3/4/5/6/8/11 MTBF (typ.): 3,724,300 h (Tel

from €9.60*
Tip
ELG-240-24A
Technical Information & Details for the MEAN WELL ELG-240-24A Power Supply Rated Power: 239.82 W Output Voltage: 24 V DC Output Current: 9.99 A (Constant Current Region 12–24 V) Input Voltage Range: 100 – 305 V AC / 142 – 431 V DC, 47 – 63 Hz Efficiency: Up to 93% Ripple & Noise: ≤ 350 mVp-p Inrush Current: Cold start 60 A at 230 V AC No-Load Power Consumption: < 0.5 W Operating Temperature: Case temperature (Tcase) from −40 °C to +90 °C Cooling: Fanless free air convection Protection Functions: Short circuit, Overload, Overvoltage, Overtemperature Ingress Protection: IP65 rated for indoor and outdoor installations Withstand Voltage: I/O-FG: 2.0 kV AC, I/O-O/P: 3.75 kV AC Dimensions (L x W x H): 244 mm × 71 mm × 37.5 mm Weight: Approx. 1.22 kg Safety & EMC Standards: UL8750 (Type HL), CSA, IEC/EN 61347, CE, EAC Control Feature: Built-in potentiometer for manual voltage and current adjustment Manufacturer Warranty: 5 years Information Regarding the MEAN WELL ELG-240-24A Engineered for high-performance industrial and outdoor lighting environments, the MEAN WELL ELG-240-24A delivers exceptional reliability and power delivery under demanding operational conditions. Housed in a durable metallic structure featuring an IP65 rating, this driver is fully protected against dust ingress and water jets, making it an ideal choice for exterior architectural setups, street lighting, and heavy-duty industrial floors. Its sophisticated dual-mode constant voltage and constant current operation enables versatile integration across complex system architectures without requiring external converter modules. At the core of this 240W unit lies an advanced topology achieving a high working efficiency of up to 93%, which significantly curtails thermal dissipation and energy waste. Supporting a wide universal input range from 100 to 305V AC, the unit seamlessly accommodates global utility grids and protects against voltage fluctuations. A standout structural asset is its robust thermal performance, supporting a wide case temperature range (Tcase) of −40 °C to +90 °C powered entirely by natural convection cooling without the risk of mechanical fan failures. Designed for field flexibility, the A-type variant includes a built-in, accessible potentiometer that empowers technicians to fine-tune both output voltage and constant current thresholds manually. Comprehensive electronic safeguards protect against abnormal states such as short circuits, overloads, overvoltages, and overtemperatures with automatic fault recovery. Backed by a comprehensive 5-year manufacturer warranty, this power supply minimizes maintenance overhead and secures long-term operational continuity. Complying with rigorous international certifications, including UL8750 Type HL for use in Class I, Division 2 hazardous locations, the device meets elite safety benchmarks. Combining high surge immunity, superior galvanic isolation, and a projected lifetime exceeding 50,000 hours, the MEAN WELL ELG-240-24A represents a dependable engineering choice for professional commercial deployments.

from €42.40*
ELG-200-12A-3Y
Technical Information & Details for the MEAN WELL ELG-200-12A-3Y Power Supply Output Power: 150 W Output Voltage: 12 V DC Output Current: 4.2 – 8.4 A Input Voltage Range: 100 – 305 V AC / 142 – 431 V DC, 47 – 63 Hz Efficiency: up to 92.5 % Ripple & Noise: ≤ 150 mVp-p Inrush Current: COLD START 60 A at 230 VAC No-Load Power Consumption: < 0.5 W Operating Temperature: Case temperature Tcase −40 °C to +90 °C Cooling: Fanless free air convection Protection Functions: Short circuit, overload, overvoltage, overtemperature Ingress Protection: IP65 (A-Type with built-in potentiometer) Withstand Voltage: I/P-O/P: 3.75 kV AC Dimensions (L x W x H): 244 mm x 71 mm x 37.5 mm Weight: approx. 1.22 kg Safety & EMC Certificates: UL8750, Type HL, EN61347-1, EAC, BIS Special Feature: 3-wire input (3Y) with protective earth connection Manufacturer Warranty: 5 years Information about the MEAN WELL ELG-200-12A-3Y Engineered for demanding industrial and architectural lighting environments, the MEAN WELL ELG-200 series delivers exceptional reliability and robust performance under harsh operational conditions. Built with a durable metal housing featuring an IP65 ingress protection rating, this driver is fully optimized for both indoor installations and exposed outdoor setups where moisture and dust resistance are critical. System integrators benefit from an extended thermal operating window defined by a case temperature range of Tcase −40 °C to +90 °C, ensuring flawless startup in freezing outdoor climates as well as high-heat industrial setups. Furthermore, the designated 3-wire input (3Y) configuration guarantees enhanced protective earth connectivity and comprehensive EMC compliance. Operating on a dual constant voltage and constant current mode, the unit provides stable output characteristics backed by an array of comprehensive safety protections against short circuits, overloads, and overvoltages. The integrated A-Type potentiometer capability allows administrators to manually fine-tune both output voltage and constant current levels directly on the unit for precise application tuning. Featuring a universal input voltage range spanning from 100 to 305 V AC, it accommodates global grid variations seamlessly while minimizing no-load power consumption. Long-term operational confidence is secured by an industry-leading 5 years manufacturer warranty provided by MEAN WELL. Additional compliance with UL8750 Type HL standards qualifies this power supply for deployment in hazardous Class I, Division 2 locations, significantly expanding its structural versatility. High electrical efficiency ratings reaching up to 92.5 percent effectively reduce internal thermal stress, preserving component lifespan and supporting global energy-saving initiatives. The completely fanless cooling design utilizes natural convection to eliminate acoustic noise and remove vulnerable moving parts, drastically lowering maintenance overhead. Strict adherence to international harmonic distortion and immunity benchmarks ensures harmonious integration within complex electrical grids. Ultimately, this high-performance power supply serves as an ideal choice for street lighting, bay lighting, and large-scale floodlighting projects requiring uncompromising durability. Its sophisticated blend of protective mechanisms, adjustable output parameters, and rugged mechanical design guarantees sustained operational excellence. Backed by a high Mean Time Between Failures (MTBF) rating, it represents a secure, future-proof investment for professional lighting engineers. Discover a dependable power solution engineered to excel where standard commercial power supplies fall short.

from €40.00*
ELG-150-12A-3Y
Technical Information & Details for MEAN WELL ELG-150-12A-3Y LED Driver Output Power: 120 W (at 200 – 305 V AC) / 84 W (at 100 – 180 V AC) Output Voltage: 12 V DC (Constant current region: 6 – 12 V) Rated Current: 10 A Adjustability: Output voltage (10.8 – 13.2 V) and current level (5 – 10 A) adjustable via internal potentiometers Ripple & Noise (max.): ≤ 150 mVp-p Voltage Tolerance: ±3.0% Input Voltage Range: 100 – 305 V AC / 142 – 431 V DC Power Cord Option (3Y Specification): 3-wire AC input cable (Class I with safety earth ground) for European / global standard installations Efficiency (Typ.): 88% Power Factor (PF): PF ≥ 0.97 at 115 V AC / PF ≥ 0.95 at 230 V AC / PF ≥ 0.92 at 277 V AC (at full load) Ingress Protection: IP65 (suitable for indoor and outdoor installations) Operating Temperature: Tcase −40 °C to +90 °C (max. case temperature +90 °C) Cooling: Fanless free air convection Protections: Over current (95 – 108%, constant current limiting), Short circuit (hiccup mode), Over voltage (13.5 – 18 V), Over temperature Form Factor / Housing: Metal housing design with functional Ground (Class I) Dimensions (L x W x H): 219 mm x 63 mm x 35.5 mm Weight: Approx. 0.95 kg Manufacturer Warranty: 5 Years Information about MEAN WELL ELG-150-12A-3Y The MEAN WELL ELG-150-12A-3Y is a high-performance AC/DC LED power supply featuring dual mode constant voltage and constant current output. Housed in a durable metal casing, it accepts a wide input voltage range of 100 to 305 V AC and provides a 12 V DC output with a rated current of up to 10 A (120 W output at 200–305 V AC). As an A-Type model, it features an IP65 rating and internal potentiometers under rubber stoppers for output voltage and current adjustment. The 3Y suffix designates the model configured with a 3-wire AC input cable with protective earth grounding for compliance with international safety standards. Designed with fanless free air convection cooling, it operates efficiently across case temperatures ranging from −40 °C to +90 °C, making it suitable for indoor and outdoor installations such as LED street lighting, architectural lighting, and floodlighting. Equipped with active PFC, built-in protection circuitry, and a lifetime expectancy exceeding 50,000 hours, it is backed by a 5-year manufacturer warranty.

from €32.40*
APV-35-24
Technical Information & Details for the MEAN WELL APV-35-24 Power Supply Not approved for use as an LED driver within the EU! An approved alternative is, e.g., the LPF-25 series Output Power: 36 W Output Voltage: 24 V DC Output Current: 0 – 1.5 A Input Voltage Range: 90 – 264 V AC / 127 – 370 V DC, 47 – 63 Hz Efficiency: 84% Ripple & Noise: max. 150 mVp-p Inrush Current: Cold start 45 A (twidth = 440 µs measured at 50% Ipeak) at 230 V AC Protection Features: Short circuit, overload (110 – 160%), overvoltage (27 – 32.4 V) Protection Rating & Class: IP42, Class 2 power unit, LPS compliant Operating Temperature: −30 °C to +70 °C Isolation Voltage: 3 kV AC (input to output) Vibration Resistance: 10 – 500 Hz, 2G 10 min./1 cycle for 60 min. each along X, Y, Z axes Dimensions (L x W x H): 84 mm x 57 mm x 29.5 mm Weight: approx. 0.18 kg Safety & EMC Standards: UL8750, CSA-C22.2 No. 250.0-13, BIS IS15885, EAC TP TC 004, BS EN/EN 62368-1, CE Manufacturer Warranty: 2 years Information about the MEAN WELL APV-35-24 Cost-sensitive general electronics and illuminated display assemblies operating in semi-exposed environments require a dependable constant-voltage source housed within a protective enclosure. Providing a stable 24-volt output with a 36-watt capacity, the MEAN WELL APV-35-24 is built inside a fully isolated plastic chassis to handle routine installation challenges. Its universal AC input range accepts voltages from 90 to 264 V AC while successfully absorbing temporary 300 V AC surge peaks for up to five seconds. Physical integration is highly efficient thanks to ultra-compact dimensions measuring 84 by 57 by 29.5 millimeters. Environmental sealing meets IP42 standards alongside Class 2 power unit and Limited Power Source (LPS) approvals, permitting safe secondary-circuit deployment without requiring a physical ground wire. Thermal dispersion relies completely on natural free-air convection, eliminating fans to guarantee silent operation and higher long-term reliability. Operational safety features automatic hiccup-mode recovery for overloads between 110 and 160 percent, alongside comprehensive protection against short circuits and output overvoltage. Electrical isolation between input and output wiring is thoroughly tested at 3 kV AC, satisfying strict international safety mandates. Furthermore, the internal layout is reinforced to withstand significant mechanical vibrations up to 2G across three distinct axes during mobile or heavy-machinery operation. Supported by global compliance certifications including UL and CE marks, this power supply unit delivers reliable performance backed by a 2-year manufacturer warranty. Pre-stripped wire leads and lightweight construction simplify physical placement in tight control boxes or decorative enclosures. For installation only in devices whose primary use is other than lighting, e.g.,copiers, overhead and slide projectors, or for scale and display lighting.

from €8.90*