OTF-12-24

Technical Information & Details for MEAN WELL ELG-100-24AB Power Supply Output Power: 96 W (at 200–305 V AC) / 70 W (at 100–180 V AC) Output Voltage: 24 V DC Output Current: 4.0 A Input Voltage Range: 100 – 305 V AC / 142 – 431 V DC, 47 – 63 Hz Efficiency: Up to 90% Ripple & Noise: ≤ 200 mVp-p Inrush Current: COLD START 60 A @ 230 V AC No Load / Standby Power: < 0.5 W Operating Temperature: −40 °C to +90 °C (Case temperature Tcase) Cooling: Fanless free air convection Protections: Short circuit (Hiccup mode), Overload (Constant current limiting), Over voltage, Over temperature Isolation Voltage: 3750 V AC between Input and Output Dimming & Adjustment: 3-in-1 dimming (0-10V, PWM, resistance) + internal Vo/Io potentiometers (AB-Type) Ingress Protection / Housing: IP65, Metal housing Dimensions (L x W x H): 199 mm x 63 mm x 35.5 mm Weight: approx. 850 g Safety & EMC Standards: UL8750 (Type HL), EN61347-1, EN61347-2-13, EN55015, EAC, CB, CE AC Input Connection: 2-wire AC input cable (Standard model) Warranty: 5 Years Information about MEAN WELL ELG-100-24AB Featuring a dual adjustment scheme, the MEAN WELL ELG-100-24AB pairs versatile 3-in-1 dimming (0-10V, PWM, resistance) control with internal potentiometers engineered for precise manual voltage and current tuning. Built into a high-grade metallic enclosure rated at IP65, it successfully prevents water jet penetration and dust build-up. The unit relies on quiet convection cooling to ensure stable output stability across an operating case temperature span from -40 °C to +90 °C. Standardized under UL8750 (Type HL) safety criteria, this driver is suitable for Class I, Division 2 hazardous zone installations and comes covered by an extended 5 years manufacturer warranty.