8-pol Cable

Fully assembled 10-pin cable suitable for CSP series, RST series approx. 10cm long.

Please check the connector housing and crimp contacts and order them if necessary – they are not included in the scope of delivery (Applies to CN2 and CN1: e.g. voltage/current programming, remote ON/OFF, etc.) Technical Information & Details for the MEAN WELL CSP-3000-400 Power Supply Output Power: 3000 W Output Voltage: 400 V DC Output Current: 7.5 A Input Voltage Range: 180 – 264 V AC / 254 – 370 V DC, 47 – 63 Hz Efficiency: Up to 92% Ripple & Noise: ≤ 1000 mVp-p Power Factor: PF ≥ 0.95 / 230 VAC (Full load) Inrush Current: Max. 60 A @ 230 VAC (Cold start) Operating Temperature: -20 °C to +65 °C (with derating) Cooling: Forced air cooling by built-in DC fans with speed control Protections: Short circuit, Overload, Over voltage, Over temperature, Fan failure Isolation Voltage: 3000 V AC between Input and Output Dimensions (H x W x D): 63.5 mm x 177.8 mm x 278 mm (2U Profile) Weight: Approx. 3500 g Safety & EMC Certificates: UL62368-1, EN62368-1, CE, EAC, BS EN Special Features: Programmable Output Voltage (PV) and Current (PC) Manufacturer Warranty: 5 Years Information on the MEAN WELL CSP-3000-400 The MEAN WELL CSP-3000-400 is a high-performance 3000W single-output power supply engineered for high-voltage industrial applications within a compact 2U enclosure. This series is distinguished by its exceptional functional flexibility, offering built-in PV (Programmable Voltage) and PC (Programmable Current) capabilities that allow for external adjustment of the output levels. Such precision makes it an ideal power source for laser-related machinery, UV curing equipment, and fish lamps, as well as complex test and measurement instruments. For higher power requirements, it supports active current sharing, enabling up to three units to be connected in parallel for a massive 9000W total output. The unit is built for durability with internal conformal coating to resist environmental hazards and an intelligent cooling system that manages fan speed based on load and temperature. Combining a 92% efficiency rating with a robust 5-year warranty, the CSP-3000-400 provides a secure and scalable energy backbone for modern factory automation.

Technical Information & Details about the MEAN WELL LPV-100-12 Power Supply Rated output power: 102 W DC output voltage: 12 V DC Rated output current: 8.5 A Current range: 0 – 8.5 A Input voltage range: 90 – 264 V AC (127 – 370 V DC), 47 – 63 Hz Efficiency (typical): about 87 % Ripple & noise (max.): ≤ 120 mVp-p Output voltage range (O.V.P. region): 13.8 – 16.2 V DC Voltage tolerance: ±5.0 % Line regulation: ±2.0 % Load regulation: ±5.0 % Setup, rise time: 2000 ms, 25 ms at 230 V AC / 115 V AC (first cold start) Hold-up time (typ.): 50 ms at 230 V AC / 14 ms at 115 V AC (full load) AC input current (typ.): 2.2 A at 115 V AC / 1.2 A at 230 V AC Inrush current (typ.): 75 A at 230 V AC (cold start, twidth ≈ 700 μs) Leakage current: < 0.25 mA at 240 V AC Overload protection: 110 – 150 % of rated output power, hiccup mode, auto recovery after fault removal Overvoltage protection: shut down output voltage at 13.8 – 16.2 V, re‑power on to recover Operating temperature: −25 °C to +70 °C (derating required, see curve) Operating humidity: 20 – 90 % RH, non‑condensing Storage conditions: −40 °C to +80 °C, 10 – 95 % RH Cooling method: free air convection (fanless) Withstand voltage: 3000 V AC between input and output Isolation resistance: > 100 MΩ at 500 V DC, 25 °C, 70 % RH Ingress protection rating: IP67, fully encapsulated plastic case Dimensions (L x W x H): 190 mm x 52 mm x 37 mm Weight: approx. 610 g Vibration resistance: 10 – 500 Hz, 2 G, 60 min per axis (X, Y, Z) EMC emission: BS EN/EN 55032 Class B, BS EN/EN 61000‑3‑2 Class A (≤80 % load), BS EN/EN 61000‑3‑3 EMC immunity: BS EN/EN 61000‑4‑2,‑3,‑4,‑5,‑6,‑8,‑11; BS EN/EN 55035 Safety approvals: UL 8750, CSA C22.2 No. 250.13‑12, UL 879, CSA C22.2 No. 207‑M89, BIS IS 15885, IEC/BS EN/EN 62368‑1, EAC Case design: fully isolated, encapsulated plastic case for damp and dusty environments MTBF (typical): 4,497,100 h (Telcordia SR‑332, 25 °C) Manufacturer warranty: 2 years About the MEAN WELL LPV-100-12 The MEAN WELL LPV-100-12 is a 100 W class constant‑voltage switching power supply that provides a regulated 12 V DC output at up to 8.5 A, fully encapsulated in an IP67 plastic housing for reliable use in harsh environments. Its universal AC input range, high efficiency, short‑circuit, overload and overvoltage protection, and fanless free air convection make it well suited for indoor and sheltered outdoor installations. With compact dimensions, strong isolation and comprehensive safety and EMC approvals, LPV-100-12 is a robust 12 V supply for LED‑related fixtures, signage, control electronics and other low‑voltage systems that require a rugged, dust‑ and splash‑proof power source.

Please check the connector housing and crimp contacts and order them if necessary – they are not included in the scope of delivery (Applies to CN2 and CN1: e.g. voltage/current programming, remote ON/OFF, etc.) Technical Information & Details for the MEAN WELL CSP-3000-250 Power Supply Output Power: 3000 W Output Voltage: 250 V DC Output Current: 12 A Input Voltage Range: 180 – 264 V AC / 254 – 370 V DC, 47 – 63 Hz Efficiency: Up to 92.5% Ripple & Noise: ≤ 800 mVp-p Inrush Current: Max. 60 A @ 230 VAC (Cold start) Power Factor: PF ≥ 0.95 / 230 VAC (Full load) Operating Temperature: -20 °C to +65 °C (with derating) Cooling: Forced air cooling by built-in DC fans with speed control Protections: Short circuit, Overload, Over voltage, Over temperature, Fan failure Isolation Voltage: 3000 V AC between Input and Output Dimensions (H x W x D): 63.5 mm x 177.8 mm x 278 mm (2U Profile) Weight: Approx. 3500 g Safety & EMC Certificates: UL62368-1, EN62368-1, CE, EAC, BS EN Special Features: Programmable Output Voltage (PV) and Current (PC) Manufacturer Warranty: 5 Years Information on the MEAN WELL CSP-3000-250 The MEAN WELL CSP-3000-250 represents a state-of-the-art power solution for industrial environments requiring high voltage and high density in a compact 2U enclosure. Its core strength lies in its vast design flexibility, offering built-in Programmable Voltage (PV) and Programmable Current (PC) functions. These features allow for real-time adjustments via external DC or PWM signals, making it perfectly suited for factory automation, test and measurement instruments, and laser-related machinery. Reliability is maximized through internal conformal coating, which protects against environmental contaminants, and an active PFC function that ensures high energy efficiency of 92.5%. Furthermore, the unit supports active current sharing, enabling the synchronization of up to three units for a scalable power output of up to 9000W. With integrated alarm signals, remote ON-OFF control, and a dedicated 12V auxiliary output, the CSP-3000-250 provides a comprehensive and robust energy backbone for modern high-performance industrial applications.

Breve PSS 80N 230V/24V Leistung: 80 VA Primärspannung: 230 VAC Sekundärspannung: 24 VAC Strom: 3,33 A Schutzklasse II und Schutzart IP20 Gewicht: 1,3 kg Doppelte Isolation Isolationsklasse B Schutz vor Überlast und Kurzschluss Schnelle Montage auf DIN-Hutschiene T35 Fertigung gemäß EN 61558-2-4, EN 61558-2-6 Weitere Information zu den Breve PSS Transformatoren Bei der PSS-Serie des Herstellers Breve handelt es sich um gekapselte Trenn- oder Sicherheitstransformatoren, welche für die Montage in Anlagen mit den DIN-Hutschienen T35 geeignet sind. Besonders die schnelle und einfache Montage, möglich durch das hochwertige, aufschnappbare Isolierstoffgehäuse, sprechen für die PSS Transformatoren von Breve. Aufgrund der doppelten Isolation ist eine weitere Erdung nicht notwendig. Weiterhin sind die Trasformatoren mit der Schutzklasse II ausgestattet und verfügen über die Schutzarten IP20 (N-Serie), IP30 und IP40 (PSS 10, PSS 20). Der Betrieb kann bei einer maximalen Umgebungstemperatur von 40°C aufgenommen werden. Zusätzlich sind die PSS Transformatoren standardmäßig gemäß den Sicherheitsnormen EN 61558-2-4 und EN 61558-2-6 gefertigt.

Breve PSS 63 230V/230V Leistung: 63 VA Primärspannung: 230 VAC Sekundärspannung: 230 VAC Strom: 0,27 A Schutzklasse II und Schutzart IP30 Gewicht: 1,2 kg Doppelte Isolation Isolationsklasse B Schutz vor Überlast und Kurzschluss Schnelle Montage auf DIN-Hutschiene T35 Fertigung gemäß EN 61558-2-4, EN 61558-2-6 Weitere Information zu den Breve PSS Transformatoren Bei der PSS-Serie des Herstellers Breve handelt es sich um gekapselte Trenn- oder Sicherheitstransformatoren, welche für die Montage in Anlagen mit den DIN-Hutschienen T35 geeignet sind. Besonders die schnelle und einfache Montage, möglich durch das hochwertige, aufschnappbare Isolierstoffgehäuse, sprechen für die PSS Transformatoren von Breve. Aufgrund der doppelten Isolation ist eine weitere Erdung nicht notwendig. Weiterhin sind die Trasformatoren mit der Schutzklasse II ausgestattet und verfügen über die Schutzarten IP20 (N-Serie), IP30 und IP40 (PSS 10, PSS 20). Der Betrieb kann bei einer maximalen Umgebungstemperatur von 40°C aufgenommen werden. Zusätzlich sind die PSS Transformatoren standardmäßig gemäß den Sicherheitsnormen EN 61558-2-4 und EN 61558-2-6 gefertigt.