Skip to main content
Go to homepage

LDDS-250HWB

Product information "LDDS-250HWB"

Technical Information & Details for the MEAN WELL LDDS-250HWB Power Supply

  • Constant Output Current: 250 mA (LED Forward String Voltage 2–45 V DC)
  • Input Voltage Range: 12–56 V DC
  • Efficiency: Up to 94%
  • Operating Temperature: −40 °C to +55 °C at full load
  • Dimming Capabilities: 3-in-1 dimming and remote ON/OFF control
  • Protection Circuits: Short circuit, over temperature, over current
  • Vibration Resistance: 10–500 Hz, 2G 10 min./1 cycle for 60 min. along X, Y, Z axes
  • Dimensions (L x W x H): 47 mm x 12 mm x 7 mm
  • Weight: Approx. 9.4 g
  • Encapsulation: 94V-0 flame retardant plastic case, fully potted with epoxy
  • Safety & EMC Standards: CE, UKCA, EAC, BS EN/EN55015
  • Manufacturer Warranty: 5 years

Information about the MEAN WELL LDDS-250HWB

Tailored specifically for track lighting adapters and modern commercial fixtures, the MEAN WELL LDDS-250HWB delivers a precision constant-current step-down DC/DC driver solution. Built inside a fully epoxy-potted 94V-0 flame-retardant housing, the unit provides outstanding physical protection backed by a robust vibration resistance of 10–500 Hz, 2G across X, Y, Z axes to withstand continuous mechanical stress. Its advanced high-frequency topology allows the module to achieve an impressive peak efficiency of up to 94 percent while minimizing thermal accumulation within tight spaces.

Lighting professionals achieve complete command over illumination output through versatile integration options, specifically providing a comprehensive 3-in-1 dimming and remote ON/OFF control interface for dynamic commercial setups. This multi-purpose adaptability makes the driver exceptionally well-suited for retail displays, architectural moods, and complex automated lighting layouts. Furthermore, the broad DC input span seamlessly accommodates standard low-voltage bus architectures.

Thermal stability stands as a foundational strength of this model, highlighted by an extended operating temperature range from −40 °C to +55 °C at full load conditions that guarantees dependable execution inside enclosed housings. Built-in electronic self-recovery protection mechanisms constantly monitor internal parameters to instantly react against sudden short circuits, overcurrents, or thermal overloads without manual intervention.

Global regulatory compliance is firmly established through official safety and EMC approvals including CE, UKCA, EAC, and BS EN/EN55015 standards. Backed by a dependable 5 years manufacturer warranty, this specialized driver ensures long-term operational excellence and peace of mind for mission-critical LED lighting installations.


Verfügbare Downloads
Download Datenblatt LDDS-250HWB
Eigenschaften für "LDDS-250HWB"
Approval: CE
Efficiency: 94%
Height: 7
Length: 47
Rated current: 250 mA
Warranty: 5 years
Weight: 12g
Width: 12

Accessory Items

RST-5000-24
Technical Information & Details for the MEAN WELL RST-5000-24 Power Supply Output Power: 4800 W Output Voltage: 24 V DC Output Current: 200 A Input Voltage Range: 3-phase 3-wire 196–305 V AC or 3-phase 4-wire / Y 340–530 V AC, 47–63 Hz Efficiency: up to 90.5 % Ripple & Noise: max. 150 mVp-p Working Temperature: −30 °C to +70 °C Cooling: Forced air cooling by built-in DC fan with speed control Protections: Short circuit, Overload, Over voltage, Over temperature, Fan fail Withstand Voltage: 3000 V AC between input and output Dimensions (L x W x H): 460 mm x 211 mm x 83.5 mm Safety Standards & Approvals: UL62368-1, TUV BS EN/EN62368-1, EAC Manufacturer Warranty: 5 years Information about the MEAN WELL RST-5000-24 Built specifically for heavy-duty industrial infrastructure, the MEAN WELL RST-5000-24 supplies a robust Output Power of 4800 W alongside a heavy Output Voltage of 24 V DC and an impressive 200 A current delivery. Designed to withstand harsh operational conditions, it features an extended Working Temperature range of -30 °C to +70 °C reaching up to +70 °C, coupled with intelligent fan speed control and comprehensive internal safeguards. Compliance with strict global Safety Standards & Approvals paired with a dependable 5-year Manufacturer Warranty guarantees long-term operational continuity for mission-critical applications. Operating across wide three-phase AC inputs, the unit integrates advanced active PFC circuitry to maintain optimal power factor performance under heavy industrial loads. It achieves an efficiency rating of up to 90.5 %, significantly reducing energy waste and thermal accumulation inside high-density control cabinets. Furthermore, built-in control terminals allow external voltage and constant current programming to precisely match specialized testing or manufacturing requirements. System scalability is efficiently handled via active current sharing, allowing multiple units to be linked in parallel to expand total power delivery for massive setups. Operational telemetry is streamlined through dedicated alarm signals for DC-OK, AC-fail, and over-temperature status via both relay and open-collector formats. Additionally, remote ON-OFF capabilities provide seamless integration into automated facility management networks. Ultimately, the RST-5000-24 proves to be an indispensable power solution for factory automation, laser equipment, and high-power burn-in facilities. By merging high current capacity with advanced telemetry and rugged environmental tolerance, it satisfies the rigorous demands of modern industrial engineering.

from €1,189.00*
RST-10000-24
Technical Information & Details for the MEAN WELL RST-10000-24 Power Supply Output Power: 9600 W Output Voltage: 24 V DC Output Current: 400 A Input Voltage Range: 3-phase 196–305 VAC (3-wire) or 340–530 VAC (4-wire/Y) Efficiency: Up to 89% Ripple & Noise: ≤ 200 mVp-p Inrush Current: 150 A @ 230 VAC / 100 A @ 400 VAC Power Factor: 0.95 / 230 VAC (400 VAC) at full load Operating Temperature: −30 °C to +70 °C (with derating) Cooling: Forced air cooling by built-in DC fan with speed control Protection Functions: Short circuit, Overload, Over voltage, Over temperature, Fan fail Programmability: Output voltage (20–120%) and Constant current level (20–100%) adjustable Isolation Voltage: 3000 VAC between input and output Dimensions (L x W x H): 540 mm x 424 mm x 83.5 mm (2U profile) Weight: Approx. 23.5 kg Safety & EMC Certificates: UL62368-1, TUV BS EN/EN62368-1, EAC, CE, UKCA Additional Features: Remote Sense, Remote ON-OFF, Alarm signals (AC-Fail, DC-OK, Fan-Fail, OTP) Manufacturer Warranty: 5 Years Information about the MEAN WELL RST-10000-24 The MEAN WELL RST-10000-24 is a cutting-edge 10kW high-power supply specifically engineered for complex industrial environments. It stands out due to its wide-range three-phase input flexibility, providing an extremely stable output of 24V at a massive 400A. A key highlight is its extensive voltage and current programming capability via external signals, allowing for precise integration into automated testing systems, burn-in facilities, or laser equipment. Through its active current sharing function, two units can be connected in parallel to achieve a massive total output of up to 20,000W. Beyond raw power, the RST-10000 series impresses with a robust design in a slim 2U profile and intelligent cooling managed by a temperature-controlled fan. Operational safety is prioritized with a wide array of protection mechanisms and built-in alarm signals, including monitoring for AC failure, DC-OK status, and fan performance. Backed by a 5-year manufacturer warranty and global safety certifications, this power supply is the premier choice for projects requiring maximum reliability, scalability, and precise power control, such as EV charging stations or large-scale RF applications.

from €2,363.60*
RST-10000-48
Technical Information & Details for the MEAN WELL RST-10000-48 Power Supply Output Power: 10080 W (10.08 kW) Output Voltage: 48 V DC Output Current: 210 A Input Voltage Range: 3-phase 196–305 VAC (3-wire) or 340–530 VAC (4-wire/Y) Efficiency: Up to 91% Ripple & Noise: ≤ 250 mVp-p Inrush Current: 150 A @ 230 VAC / 100 A @ 400 VAC Power Factor: 0.95 / 230 VAC (400 VAC) at full load Operating Temperature: −30 °C to +70 °C Cooling: Forced air cooling by built-in DC fans with speed control Protection Functions: Short circuit, Overload, Over voltage, Over temperature, Fan fail Voltage Adustment: 48–58 V DC via internal potentiometer Programmability: Output voltage (20–120%) and Constant current level (20–100%) adjustable Dimensions (L x W x H): 540 mm x 424 mm x 83.5 mm (2U profile) Weight: Approx. 23.5 kg Safety Standards: UL62368-1, TUV EN62368-1, EAC, CE, UKCA Alarm Signals: AC-Fail, DC-OK, Fan-Fail, OTP-Alarm (Relay contact) Manufacturer Warranty: 5 Years Information about the MEAN WELL RST-10000-48 The MEAN WELL RST-10000-48 is a high-performance industrial power solution designed for large-scale applications requiring a massive and stable 48V energy source. Delivering an output power of over 10kW with an efficiency of up to 91%, this unit is a benchmark for energy density and efficiency in heavy-duty environments. A standout characteristic is its wide-range three-phase input capability, compatible with both 3-wire and 4-wire configurations, which ensures seamless integration into international industrial power grids. For even higher power requirements, the active current sharing feature allows two units to be connected in parallel, scaling the total system output to 20kW. This power supply excels in precision control, offering programmable voltage and current levels (PV/PC) through external analog signals. This versatility makes the RST-10000-48 the ideal choice for high-tech sectors such as EV charging stations, industrial laser machines, and Burn-in facilities. The rugged 2U low-profile design is complemented by intelligent forced-air cooling and a comprehensive suite of alarm signals for real-time status monitoring of AC power, DC output, and fan health. Supported by a solid 5-year manufacturer warranty, this unit provides the high reliability and longevity required for mission-critical industrial operations.

from €2,363.60*
RST-5000-36
Technical Information & Details for the MEAN WELL RST-5000-36 Power Supply Output Power: 4968 W Output Voltage: 36 V DC Output Current: 138 A Input Voltage Range: 3-phase 3-wire 196–305 V AC or 3-phase 4-wire / Y 340–530 V AC, 47–63 Hz Efficiency: up to 89 % Ripple & Noise: max. 200 mVp-p Working Temperature: −30 °C to +70 °C Cooling: Forced air cooling by built-in DC fan with speed control Protections: Short circuit, Overload, Over voltage, Over temperature, Fan fail Withstand Voltage: 3000 V AC between input and output Dimensions (L x W x H): 460 mm x 211 mm x 83.5 mm Safety Standards & Approvals: UL62368-1, TUV BS EN/EN62368-1, EAC Manufacturer Warranty: 5 years Information about the MEAN WELL RST-5000-36 Designed for heavy-duty industrial applications, the MEAN WELL RST-5000-36 delivers a substantial Output Power of 4968 W alongside a steady Output Voltage of 36 V DC and a 138 A current rating. To handle rigorous operational conditions seamlessly, it features an extended Working Temperature range of -30 °C to +70 °C coupled with intelligent cooling control and extensive internal protection safeguards. Compliance with rigorous global Safety Standards & Approvals backed by a reliable Manufacturer Warranty of 5 years ensures total peace of mind for mission-critical deployments. Operating across flexible three-phase AC power lines, the unit utilizes advanced active PFC circuitry to maintain high power factor performance under heavy industrial loads. It achieves an efficiency rating of up to 89 %, minimizing thermal dissipation inside high-density electrical enclosures. Furthermore, built-in control terminals enable precise external programming for both output voltage and constant current thresholds to match specialized test setups. System scalability is easily achieved through active current sharing, allowing multiple units to operate in parallel to multiply total power delivery for large-scale infrastructure. Operational status tracking is fully supported via dedicated alarm signals for DC-OK, AC-fail, fan failure, and over-temperature conditions through relay and open-collector outputs. The compact 2U low-profile form factor ensures straightforward mechanical integration into standard industrial racks. Ultimately, the RST-5000-36 stands out as a versatile and high-performance power solution for factory automation, laser processing equipment, and high-power burn-in facilities. By combining heavy current capacity with advanced telemetry and rugged environmental tolerance, it successfully fulfills the strict demands of modern engineering.

from €1,189.00*
UHP-1500-380E
Technical Information & Details for the MEAN WELL UHP-1500-380E Power Supply Series Name: UHP-1500-HV Model No.: UHP-1500-380E (E type: DC 380V only without PV/PC and communication protocol) Communication Protocol: None (E type does not include communication protocols) Rated Power: 1501W Rated Current: 3.95A (Max: 4.5A) DC Voltage (Default): 380V Voltage Adjustment Range: 350–420V (by built-in potentiometer SVR) Ripple & Noise (Max.): 3800 mV p-p Voltage Tolerance: ±1.0% Line Regulation: ±0.5% Load Regulation: ±0.5% Input Voltage Range: 90–264 Vac (250–370 Vdc) Frequency Range: 47–63 Hz Power Factor (Typ.): PF > 0.95 / 230 Vac at full load Efficiency (Typ.): 95.5% AC Current (Typ.): 8A / 230 Vac Inrush Current (Typ.): Cold start 60A / 230 Vac Leakage Current: < 0.75 mA / 240 Vac Working Temperature Range: −30 °C to +70 °C Protection Functions: Short circuit, Overload (105–125% rated output power), Over voltage (428–460V), Over temperature Dimensions (L x W x H): 290 mm x 140 mm x 41 mm Weight: 2.51 kg Safety & EMC Standards: UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004, BS EN/EN55032 Class B (Conducted) / Class A (Radiated) Warranty: 5 years Information about the UHP-1500-380E The MEAN WELL UHP-1500-380E is a specialized high voltage output 1500W slim power supply featuring a low profile 1U design of just 41 mm. Operating as part of the conduction-cooled HV series, it achieves a high efficiency of up to 95.5% and functions reliably under free air convection across a wide operating temperature range from −30 °C to +70 °C. As part of the streamlined E-type designation, this specific model is designed strictly for 380Vdc output operation without PV/PC programming or communication protocols, providing a simplified solution equipped with basic remote ON-OFF control and full electronic protections.

from €192.80*
RST-10000-36
Technical Information & Details for the MEAN WELL RST-10000-36 Power Supply Output Power: 9936 W Output Voltage: 36 V DC Output Current: 276 A Input Voltage Range: 3-phase 196–305 VAC (3-wire) or 340–530 VAC (4-wire/Y) Efficiency: Up to 90% Ripple & Noise: ≤ 200 mVp-p Inrush Current: 150 A @ 230 VAC / 100 A @ 400 VAC Power Factor: 0.95 / 230 VAC (400 VAC) at full load Operating Temperature: −30 °C to +70 °C (with derating) Cooling: Forced air cooling by built-in DC fan with speed control Protection Functions: Short circuit, Overload, Over voltage, Over temperature, Fan fail Programmability: Output voltage (20–120%) and Constant current level (20–100%) adjustable via external voltage Isolation Voltage: 3000 VAC between input and output Dimensions (L x W x H): 540 mm x 424 mm x 83.5 mm (2U profile) Weight: Approx. 23.5 kg Safety & EMC Certificates: UL62368-1, TUV BS EN/EN62368-1, EAC, CE, UKCA Additional Features: Remote Sense, Remote ON-OFF, Auxiliary power (12V/0.1A), Alarm signals Manufacturer Warranty: 5 Years Information about the MEAN WELL RST-10000-36 The MEAN WELL RST-10000-36 is a powerhouse designed for industrial-scale applications requiring massive energy output and high operational stability. It provides a robust 36V DC output with a capacity of 276A, making it suitable for high-demand loads. One of its most distinctive characteristics is the vast design flexibility provided by its programmable voltage and current levels, allowing users to fine-tune the output between 20-120% of the nominal voltage. Additionally, the unit supports active current sharing, enabling the parallel connection of up to two units to reach a total power capability of 20,000W for high-performance systems. Engineered for longevity and reliability, the RST-10000-36 features a wide-range three-phase AC input, ensuring compatibility with various international power grids. The built-in active PFC function and high efficiency of up to 90% ensure optimized energy usage and minimal heat generation, while the forced air cooling system adapts to thermal needs via integrated fan speed control. This model is exceptionally well-suited for automation apparatus, burn-in facilities, and EV charging stations, providing peace of mind with a comprehensive suite of safety protections and a long-term 5-year manufacturer warranty.

from €2,363.60*
SHP-10K-230
Technical Information & Details for the MEAN WELL SHP-10K-230 Power Supply Output Power: 10,000 W (10 kW) Output Voltage: 230 V DC Output Current: 43.5 A Input Voltage Range: 3-Phase 340 – 530 V AC (3-wire / Delta or 4-wire / Y) Efficiency: up to 97% Ripple & Noise: ≤ 2300 mVp-p Power Factor: ≥ 0.98 @ 400 V AC / 480 V AC Cooling: Water-cooled (L-Type) or Forced-air (Blank-Type) Protection Functions: Short circuit, Overload, Over voltage, Over temperature, Fan fail Communication Protocols: CANBus (standard), PMBus/MODBus-RTU (optional) Isolation Voltage: 3,750 V AC Dimensions (L x W x H): 460 mm x 216 mm x 83.5 mm (2U Profile) Weight: approx. 10.15 kg (L-Type) / 11.55 kg (Blank-Type) Safety & EMC Certificates: UL62368-1, TUV EN62368-1, EAC, CE, CB Special Features: Programmable Voltage and Current, active current sharing Manufacturer Warranty: 5 years Information about the MEAN WELL SHP-10K-230 The MEAN WELL SHP-10K-230 stands as a premier high-efficiency digital power solution, engineered to provide massive DC power for advanced industrial sectors. Its most significant characteristic is the advanced cooling versatility, offering a specialized water-cooled L-type model that ensures peak thermal performance in airtight or harsh environments where traditional air cooling is restricted. Housed in a space-saving 2U rack-mount chassis, this unit maximizes power density while its wide 3-phase AC input eliminates the need for a neutral wire, providing seamless compatibility with global industrial power grids. Intelligence and precision are integrated into the core of the SHP-10K-230, featuring built-in digital communication protocols like CANBus for real-time monitoring and Industry 4.0 automation. The unit is highly adaptable, offering programmable output voltage (50–120%) and constant current levels, making it perfectly suited for high-demand applications such as electrolysis systems, laser processing, and EV charging stations. Furthermore, the capability for active current sharing allows for the synchronization of up to four units to reach a staggering 40 kW total system output, all backed by a 5-year manufacturer warranty for guaranteed long-term reliability.

from €2,172.40*
SHP-10K-230L
Technical Information & Details for the MEAN WELL SHP-10K-230L Power Supply Output Power: 10,000 W (10 kW) Output Voltage: 230 V DC Output Current: 43.5 A Input Voltage Range: 3-Phase 340 – 530 V AC (3-wire / Delta or 4-wire / Y) Efficiency: up to 97% Ripple & Noise: ≤ 2300 mVp-p Power Factor: ≥ 0.98 @ 400 V AC / 480 V AC Cooling: Water-cooled (L-Type) Protection Functions: Short circuit, Overload, Over voltage, Over temperature Communication Protocols: CANBus (standard), PMBus/MODBus-RTU/RS-485 (optional) Isolation Voltage: 3,750 V AC Dimensions (L x W x H): 460 mm x 216 mm x 83.5 mm (2U Profile) Weight: approx. 10.15 kg Safety & EMC Certificates: UL62368-1, TUV EN62368-1, EAC, CE, CB Special Features: Programmable Voltage and Current, active current sharing Manufacturer Warranty: 5 years Information about the MEAN WELL SHP-10K-230L The MEAN WELL SHP-10K-230L is a high-performance power solution defined by its advanced water-cooling architecture (L-Type), making it ideal for high-density industrial applications where fan noise or dust accumulation must be avoided. This liquid-cooled design ensures maximum thermal stability and efficiency, allowing the unit to deliver a constant 10 kW output within a slim 2U rack-mount chassis. By operating on a wide 3-phase AC input without the need for a neutral wire, it provides global compatibility and simplifies the power distribution setup in complex automated systems. Intelligence is at the core of the SHP-10K-230L, featuring full digital control through built-in CANBus or optional PMBus and MODBus protocols for seamless Industry 4.0 integration. Users benefit from programmable output voltage and current levels, which allow for precise calibration to match the requirements of energy-intensive applications such as EV charging stations, large-scale electrolysis, or laser processing machinery. Furthermore, its active current sharing capability enables the synchronization of multiple units to achieve a total power capacity of up to 40 kW, all while being protected by a robust 5-year manufacturer warranty for long-term reliability.

from €2,411.40*
RST-5000-48
Technical Information & Details for the MEAN WELL RST-5000-48 Power Supply Output Power: 5040 W Output Voltage: 48 V DC Output Current: 105 A Input Voltage Range: 3-phase 3-wire 196–305 V AC or 3-phase 4-wire / Y 340–530 V AC, 47–63 Hz Efficiency: up to 91.5 % Ripple & Noise: max. 200 mVp-p Working Temperature: −30 °C to +70 °C Cooling: Forced air cooling by built-in DC fan with speed control Protections: Short circuit, Overload, Over voltage, Over temperature, Fan fail Withstand Voltage: 3000 V AC between input and output Dimensions (L x W x H): 460 mm x 211 mm x 83.5 mm Safety Standards & Approvals: UL62368-1, TUV BS EN/EN62368-1, EAC Manufacturer Warranty: 5 years Information about the MEAN WELL RST-5000-48 Engineered for high-demand industrial environments, the MEAN WELL RST-5000-48 delivers robust conversion capabilities with a heavy-duty Output Power rating of 5040 W and a steady 48 V DC Output Voltage. Operating across wide three-phase AC inputs, this enclosed power supply integrates advanced active PFC and flexible programming options to fit complex automation setups. Industrial operators benefit from an extended Working Temperature window reaching up to +70 °C, backed by intelligent fan speed control and comprehensive internal safeguards. Compliance with rigorous global Safety Standards & Approvals alongside a dependable 5-year Manufacturer Warranty ensures long-term operational peace of mind. Achieving an impressive peak efficiency of up to 91.5 %, the unit minimizes thermal dissipation while handling demanding continuous loads. Its built-in control terminals allow precise external trimming of both voltage and constant current levels, accommodating specialized testing equipment and burn-in facilities. Furthermore, active current sharing enables seamless parallel expansion up to multiple units, multiplying total delivery capacity for heavy industrial infrastructure. Operational status monitoring is streamlined through dedicated DC-OK, AC-fail, and over-temperature alarm signals provided via both relay contacts and open collector outputs. The compact 2U low-profile rack design simplifies mechanical integration into standard industrial cabinets while maintaining high vibration resistance and structural integrity. Remote ON-OFF control capabilities add another layer of operational automation for facility management systems. Ultimately, the RST-5000-48 stands out as a versatile and high-capacity choice for factory automation, laser systems, and high-power charging stations. By pairing high power density with intelligent telemetry and robust environmental tolerance, it meets the strict demands of modern industrial engineering.

from €1,189.00*