TS-3000-224B Auslaufmodell

Technical Information & Details for the MEAN WELL NTS-1700-212EU Inverter Rated Power: 1700 W (continuous) Surge Power: 3400 W (for 30 cycles) Output Voltage: 200 / 220 / 230 / 240 V AC (DIP switch selectable, default: 230 V AC) Output Frequency: 50 / 60 Hz (DIP switch selectable) Output Waveform: True Sine Wave (THD < 3%) Input DC Voltage: 12 V DC (10 – 16.5 V DC operating range) Maximum DC Current: 170 A Efficiency: up to 92% No-Load Dissipation (Saving Mode): ≤ 1.2 W to 1.5 W (auto-load detection) Operating Temperature: −25 °C to +70 °C Cooling: Temperature-controlled cooling fan Protections (Input): Reverse polarity, DC low alarm, DC low shutdown, Over voltage Protections (Output): Short circuit, Overload, Over temperature Supported Battery Types: Lead-acid or Li-ion batteries Communication & Control: RS-232 (RJ11 port), Remote ON-OFF control AC Outlet Type: EU Type (Schuko) Dimensions (L x W x H): 400 mm x 184 mm x 70 mm Weight: approx. 4.63 kg Safety & EMC Certificates: CB, IEC62368-1, DEKRA, BS EN/EN62368-1, EAC, CE Manufacturer Warranty: 3 Years Information About the MEAN WELL NTS-1700-212EU The MEAN WELL NTS-1700-212EU is a high-performance, digitally controlled off-grid DC-AC power inverter designed to deliver 1700 W continuous output power with a high peak surge capacity of up to 3400 W. Producing a clean true sine wave with THD < 3%, it guarantees stable, utility-grade AC power for sensitive electronic equipment, power tools, and residential or industrial appliances alike. Built with advanced MCU digital control circuitry, the inverter offers quick response to environmental changes and allows manual tuning of AC output voltage and frequency via convenient front-panel DIP switches. Engineered for maximum energy conservation, this inverter boasts an impressive peak efficiency of up to 92% and a negligible standby dissipation under 1.5 W in energy-saving mode, significantly extending battery lifespan. It seamlessly supports both lead-acid and lithium-ion batteries while incorporating comprehensive safety features including input reverse polarity, low voltage disconnect, short circuit, over-temperature, and overload protection. Operating reliably across a broad temperature range of -25 °C to +70 °C and featuring RS-232 communication and remote ON/OFF capability, the NTS-1700-212EU is an ideal power solution for RVs, marine yachts, remote telecom sites, and emergency backup systems, supported by a 3-year manufacturer warranty.

Technical Information & Details for the MEAN WELL NTS-1700-224EU Inverter Rated Power: 1700 W (continuous) Surge Power: 3400 W (for 30 cycles) Output Voltage: 200 / 220 / 230 / 240 V AC (DIP switch selectable, default: 230 V AC) Output Frequency: 50 / 60 Hz (DIP switch selectable) Output Waveform: True Sine Wave (THD < 3%) Input DC Voltage: 24 V DC (20 – 33 V DC operating range) Maximum DC Current: 85 A Efficiency: up to 93% No-Load Dissipation (Saving Mode): ≤ 1.2 W to 1.5 W (auto-load detection) Operating Temperature: −25 °C to +70 °C Cooling: Temperature-controlled cooling fan Protections (Input): Reverse polarity, DC low alarm, DC low shutdown, Over voltage Protections (Output): Short circuit, Overload, Over temperature Supported Battery Types: Lead-acid or Li-ion batteries Communication & Control: RS-232 (RJ11 port), Remote ON-OFF control AC Outlet Type: EU Type (Schuko) Dimensions (L x W x H): 400 mm x 184 mm x 70 mm Weight: approx. 4.63 kg Safety & EMC Certificates: CB, IEC62368-1, DEKRA, BS EN/EN62368-1, EAC, CE Manufacturer Warranty: 3 Years Information About the MEAN WELL NTS-1700-224EU The MEAN WELL NTS-1700-224EU is a highly reliable, MCU-digitally controlled off-grid DC-AC power inverter engineered to convert 24 V DC input power into stable AC output. Delivering a continuous rating of 1700 W continuous power alongside an impressive peak surge power of up to 3400 W, it effortlessly handles heavy inductive and capacitive start-up loads. Producing a ultra-clean true sine wave output with THD < 3%, it guarantees utility-grade electricity for high-precision tools, office devices, and sensitive commercial equipment. Output voltage and frequency settings can be effortlessly configured via user-accessible DIP switches on the front panel. Optimized for superior energy conservation, this 24 V system achieves a top-tier efficiency of up to 93% while drawing less than 1.5 W standby dissipation in automatic power-saving mode to maximize battery performance. It supports both lead-acid and lithium-ion battery chemistry and features full hardware protection including input reverse polarity, low voltage disconnect, over-temperature shutdown, and short-circuit auto-recovery. Operating dependably across a wide -25 °C to +70 °C temperature range and featuring RS-232 communication capabilities alongside remote control ports, the NTS-1700-224EU represents a premium solution for solar systems, marine yachts, motorhomes, and industrial off-grid sites, backed by a 3-year manufacturer warranty.

Technical Information & Details for the MEAN WELL NTS-1700-248EU Inverter Rated Power: 1700 W (continuous) Surge Power: 3400 W (for 30 cycles) Output Voltage: 200 / 220 / 230 / 240 V AC (DIP switch selectable, default: 230 V AC) Output Frequency: 50 / 60 Hz (DIP switch selectable) Output Waveform: True Sine Wave (THD < 3%) Input DC Voltage: 48 V DC (40 – 66 V DC operating range) Maximum DC Current: 42.5 A Efficiency: up to 93% No-Load Dissipation (Saving Mode): ≤ 1.2 W to 1.5 W (auto-load detection) Operating Temperature: −25 °C to +70 °C Cooling: Temperature-controlled cooling fan Protections (Input): Reverse polarity, DC low alarm, DC low shutdown, Over voltage Protections (Output): Short circuit, Overload, Over temperature Supported Battery Types: Lead-acid or Li-ion batteries Communication & Control: RS-232 (RJ11 port), Remote ON-OFF control AC Outlet Type: EU Type (Schuko) Dimensions (L x W x H): 400 mm x 184 mm x 70 mm Weight: approx. 4.63 kg Safety & EMC Certificates: CB, IEC62368-1, DEKRA, BS EN/EN62368-1, EAC, CE Manufacturer Warranty: 3 Years Information About the MEAN WELL NTS-1700-248EU The MEAN WELL NTS-1700-248EU is a high-efficiency off-grid DC-AC power inverter designed for 48 V DC battery architectures, offering a stable 1700 W continuous output power with a high peak surge capability of up to 3400 W. Producing a pristine true sine wave output with THD < 3%, it supplies clean, utility-grade power to protect delicate electronics, communications gear, and industrial equipment against harmonic distortion. Powered by advanced digital MCU circuitry, users can easily configure output voltage levels and frequency via front-panel DIP switches to suit diverse regional application requirements. Designed for optimal energy management, the 48 V DC configuration reduces operating current requirements and heat generation, achieving an impressive peak efficiency of up to 93%. In standby saving mode, it draws less than 1.5 W no-load dissipation, preventing unnecessary battery depletion. Fully compatible with both lead-acid and lithium-ion battery technology, the unit incorporates comprehensive protection systems including battery low-voltage disconnect, reverse polarity, over-temperature, and short-circuit protection. With its wide operating range of -25 °C to +70 °C, integrated RS-232 communication port, and remote ON/OFF functionality, the NTS-1700-248EU is an exceptional choice for off-grid solar systems, telecommunications, marine setups, and remote industrial power setups, complete with a reliable 3-year manufacturer warranty.

Technical Information & Details for the MEAN WELL NTS-2200-212EU Inverter Rated Power: 2200 W (continuous) Surge Power: 4400 W (for 30 cycles) Output Voltage: 200 / 220 / 230 / 240 V AC (DIP switch selectable, default: 230 V AC) Output Frequency: 50 / 60 Hz (DIP switch selectable) Output Waveform: True Sine Wave (THD < 3%) Input DC Voltage: 12 V DC (10 – 16.5 V DC operating range) Maximum DC Current: 250 A Efficiency: up to 89% No-Load Dissipation (Saving Mode): < 1.7 W (auto-load detection) Operating Temperature: −25 °C to +70 °C Cooling: Temperature-controlled cooling fan Protections (Input): Reverse polarity, DC low alarm, DC low shutdown, Over voltage Protections (Output): Short circuit, Overload, Over temperature Supported Battery Types: Lead-acid or Li-ion batteries Communication & Control: RS-232 (RJ11 port), Remote ON-OFF control AC Outlet Type: EU Type (Schuko) Dimensions (L x W x H): 420 mm x 270 mm x 98 mm Weight: approx. 8.6 kg Safety & EMC Certificates: CB, IEC62368-1, DEKRA, BS EN/EN62368-1, EAC, CE, E13 Manufacturer Warranty: 3 Years Information About the MEAN WELL NTS-2200-212EU The MEAN WELL NTS-2200-212EU is a heavy-duty, digitally controlled off-grid DC-AC power inverter designed to provide a robust 2200 W continuous output power with a high peak surge power capability of up to 4400 W. Engineered to handle high starting currents from heavy-duty equipment like power tools, air conditioners, and induction stoves, it delivers a high-quality true sine wave output with THD < 3% to ensure flawless operation of sensitive electronics. Featuring advanced MCU digital control circuitry, the unit offers quick environmental response times and enables easy manual tuning of output voltages and frequencies via front-panel DIP switches. Built for optimal efficiency and energy management, this 12 V inverter delivers a high efficiency rate of up to 89% while drawing less than 1.7 W no-load dissipation in standby power-saving mode to prevent unnecessary battery drain. It offers universal compatibility with both lead-acid and lithium-ion battery banks and comes equipped with complete protection circuitry, including input reverse polarity, low-voltage disconnect, short-circuit, overload, and over-temperature protections. With a broad operating temperature range of -25 °C to +70 °C, integrated RS-232 communication capabilities, and remote control ports, the NTS-2200-212EU is an ideal solution for off-grid solar systems, yachts, motorhomes, and industrial applications, fully backed by a 3-year manufacturer warranty.

Technical Information & Details for the MEAN WELL NTS-2200-248EU Inverter Rated Power: 2200 W (continuous) Surge Power: 4400 W (for 30 cycles) Output Voltage: 200 / 220 / 230 / 240 V AC (DIP switch selectable, default: 230 V AC) Output Frequency: 50 / 60 Hz (DIP switch selectable) Output Waveform: True Sine Wave (THD < 3%) Input DC Voltage: 48 V DC (40 – 66 V DC operating range) Maximum DC Current: 60 A Efficiency: up to 93% No-Load Dissipation (Saving Mode): < 1.7 W (auto-load detection) Operating Temperature: −25 °C to +70 °C Cooling: Temperature-controlled cooling fan Protections (Input): Reverse polarity, DC low alarm, DC low shutdown, Over voltage Protections (Output): Short circuit, Overload, Over temperature Supported Battery Types: Lead-acid or Li-ion batteries Communication & Control: RS-232 (RJ11 port), Remote ON-OFF control AC Outlet Type: EU Type (Schuko) Dimensions (L x W x H): 420 mm x 270 mm x 98 mm Weight: approx. 8.6 kg Safety & EMC Certificates: CB, IEC62368-1, DEKRA, BS EN/EN62368-1, EAC, CE, E13 Manufacturer Warranty: 3 Years Information About the MEAN WELL NTS-2200-248EU The MEAN WELL NTS-2200-248EU is a high-performance off-grid DC-AC power inverter designed for 48 V DC battery architectures, offering a robust 2200 W continuous output power with an impressive peak surge power capability of up to 4400 W. Engineered to handle high starting currents from heavy inductive and capacitive loads, it provides a clean true sine wave output with THD < 3% to ensure the safe, smooth operation of sensitive electronics and commercial-grade machinery. Driven by advanced MCU digital control circuitry, users can conveniently calibrate AC output voltage and frequency settings via front-panel DIP switches. Designed for optimal energy efficiency, the 48 V DC input configuration significantly lowers current draw and internal heating, allowing the inverter to reach a top-tier efficiency of up to 93%. In standby saving mode, it draws less than 1.7 W no-load dissipation, preventing unnecessary battery depletion over long idle periods. Fully compatible with both lead-acid and lithium-ion battery banks, the unit incorporates full hardware safety features including low-voltage disconnect, reverse polarity, short-circuit, overload, and over-temperature protections. Featuring a wide -25 °C to +70 °C operating temperature range, RS-232 communication port, and remote control options, the NTS-2200-248EU is an ideal solution for off-grid solar systems, telecommunications, marine vessels, and industrial backup power, supported by a 3-year manufacturer warranty.

Technical Information & Details for the MEAN WELL NTS-2200-224EU Inverter Rated Power: 2200 W (continuous) Surge Power: 4400 W (for 30 cycles) Output Voltage: 200 / 220 / 230 / 240 V AC (DIP switch selectable, default: 230 V AC) Output Frequency: 50 / 60 Hz (DIP switch selectable) Output Waveform: True Sine Wave (THD < 3%) Input DC Voltage: 24 V DC (20 – 33 V DC operating range) Maximum DC Current: 120 A Efficiency: up to 92% No-Load Dissipation (Saving Mode): < 1.7 W (auto-load detection) Operating Temperature: −25 °C to +70 °C Cooling: Temperature-controlled cooling fan Protections (Input): Reverse polarity, DC low alarm, DC low shutdown, Over voltage Protections (Output): Short circuit, Overload, Over temperature Supported Battery Types: Lead-acid or Li-ion batteries Communication & Control: RS-232 (RJ11 port), Remote ON-OFF control AC Outlet Type: EU Type (Schuko) Dimensions (L x W x H): 420 mm x 270 mm x 98 mm Weight: approx. 8.6 kg Safety & EMC Certificates: CB, IEC62368-1, DEKRA, BS EN/EN62368-1, EAC, CE, E13 Manufacturer Warranty: 3 Years Information About the MEAN WELL NTS-2200-224EU The MEAN WELL NTS-2200-224EU is a highly reliable off-grid DC-AC power inverter engineered for 24 V DC systems, providing a steady 2200 W continuous output power and an impressive peak surge power capability of up to 4400 W. Designed to effortlessly drive heavy starting loads from power tools, home appliances, and vehicle-mounted equipment, it generates a clean true sine wave output with THD < 3% to safeguard sensitive electronics from distortion. Utilizing advanced MCU digital control circuitry, users can easily configure output voltage and frequency settings via front-panel DIP switches. Engineered for efficient energy management, this 24 V inverter achieves a high operating efficiency of up to 92% while consuming less than 1.7 W no-load dissipation in standby saving mode to avoid unnecessary battery drain. Fully compatible with both lead-acid and lithium-ion battery technology, the unit incorporates comprehensive built-in protection mechanisms including input reverse polarity, low voltage disconnect, short-circuit, overload, and over-temperature safeguards. With a wide operating range of -25 °C to +70 °C, integrated RS-232 communication port, and remote control support, the NTS-2200-224EU is a top-tier choice for solar installations, marine setups, commercial vehicles, and remote industrial setups, backed by a 3-year manufacturer warranty.

Technical Information & Details for MEAN WELL NTS-3200-212EU Inverter Rated Power: 3200 W (Continuous), 3680 W (3 min.), 4800 W (10 sec.), 6400 W (Surge Peak/30 cycles) Output Voltage: 230 VAC (200 / 220 / 230 / 240 VAC selectable via DIP S.W) Output Frequency: 50 Hz / 60 Hz (selectable via DIP S.W) Waveform: True Sine Wave (THD < 3%) Input Voltage: 12 VDC (10 – 16.5 VDC) Efficiency: Up to 89% No-Load Power Dissipation: < 1.7 W in standby saving mode (at load ≤ 10 W) Operating Temperature: −25 °C to +70 °C Cooling: Temperature controlled cooling fan Protections (Input): Reverse polarity, DC low alarm, DC low shutdown, over voltage, battery over discharge Protections (Output): Short circuit, overload, over temperature Isolation Voltage: 3000 VAC (Input to Output), 1500 VAC (Output to FG) Interfaces & Control: Remote ON-OFF control (Dry Contact), RS-232 communication port (via RJ11) AC Socket Type: EU Type (Type-EU) Dimensions (L x W x H): 420 mm x 270 mm x 98 mm Weight: approx. 8.6 kg Safety & EMC Standards: CB IEC62368-1, DEKRA BS EN/EN62368-1, UL458, E13, EAC, CE, UKCA, AS/NZS 62368.1 LED Indicators: Front panel status indicators for operation, DC input, and load level Manufacturer Warranty: 3 Years Information about the MEAN WELL NTS-3200-212EU The MEAN WELL NTS-3200-212EU is a heavy-duty, off-grid 12V DC-AC standalone power inverter equipped with a European AC outlet, engineered to deliver high-quality True Sine Wave AC power (THD < 3%) to demanding electrical loads. Featuring an advanced digital MCU control design and PCB conformal coating, this robust inverter ensures exceptional reliability and fast transient response. Providing 3200 W of continuous power, it excels at starting heavy induction loads with an impressive peak surge power capability of up to 6400 W. Designed for smart system integration, the inverter features a built-in RS-232 communication port via RJ11 alongside dry-contact remote ON-OFF functionality. In standby energy-saving mode, no-load power dissipation drops to under 1.7 W, significantly preserving the lifespan and capacity of connected 12V lead-acid or lithium-ion battery banks. Complete with hardware DIP switches for AC voltage and frequency selection, low-noise temperature-regulated cooling fans, and a wide operating temperature range from -25 °C to +70 °C, this inverter is a premier power solution for RVs, marine yachts, off-grid solar setups, emergency backup systems, and field power applications.

Technical Information & Details for MEAN WELL NTS-3200-224EU Inverter Rated Power: 3200 W (Continuous), 3680 W (3 min.), 4800 W (10 sec.), 6400 W (Surge Peak/30 cycles) Output Voltage: 230 VAC (200 / 220 / 230 / 240 VAC selectable via DIP S.W) Output Frequency: 50 Hz / 60 Hz (selectable via DIP S.W) Waveform: True Sine Wave (THD < 3%) Input Voltage: 24 VDC (20 – 33 VDC) Efficiency: Up to 91% No-Load Power Dissipation: < 1.7 W in standby saving mode (at load ≤ 10 W) Operating Temperature: −25 °C to +70 °C Cooling: Temperature controlled cooling fan Protections (Input): Reverse polarity, DC low alarm, DC low shutdown, over voltage, battery over discharge Protections (Output): Short circuit, overload, over temperature Isolation Voltage: 3000 VAC (Input to Output), 1500 VAC (Output to FG) Interfaces & Control: Remote ON-OFF control (Dry Contact), RS-232 communication port (via RJ11) AC Socket Type: EU Type (Type-EU) Dimensions (L x W x H): 420 mm x 270 mm x 98 mm Weight: approx. 8.6 kg Safety & EMC Standards: CB IEC62368-1, DEKRA BS EN/EN62368-1, UL458, E13, EAC, CE, UKCA, AS/NZS 62368.1 LED Indicators: Front panel status indicators for operation, DC input, and load level Manufacturer Warranty: 3 Years Information about the MEAN WELL NTS-3200-224EU The MEAN WELL NTS-3200-224EU is a heavy-duty, off-grid 24V DC-AC standalone power inverter featuring a European AC outlet, designed to output clean True Sine Wave AC power (THD < 3%) to sensitive and high-power electrical loads. Built with a digital MCU control design and PCB conformal coating, this inverter combines robust reliability with rapid load response. Operating at 3200 W continuous power with a high peak efficiency of up to 91%, it comfortably starts heavy motor loads using its surge capacity of up to 6400 W. Equipped for seamless integration into monitoring systems, the unit includes an onboard RS-232 communication port via RJ11 and a dry-contact remote ON-OFF connector. Its standby power-saving mode limits power consumption to under 1.7 W, effectively preserving connected 24V lead-acid or lithium battery banks. Featuring hardware DIP switches for AC voltage and frequency adjustments, low-noise temperature-regulated cooling fans, and a wide operating temperature range from -25 °C to +70 °C, this inverter is an ideal power choice for heavy commercial vehicles, marine vessels, off-grid solar systems, and remote industrial power sites.

Technical Information & Details for the MEAN WELL NTS-3200 Series Power Inverter Rated Power (Continuous): 3000W (12V models) / 3200W (24V & 48V models) Peak Power (10 Sec.): 4800W (12V models) / 4500W (24V & 48V models) Surge Power (30 Cycles): 6400W (12V models) / 6000W (24V & 48V models) Output Waveform: True sine wave (THD < 3%) AC Output Voltage (Selectable via DIP S.W): 100 / 110 / 115 / 120 Vac or 200 / 220 / 230 / 240 Vac Frequency (Selectable via DIP S.W): 50 / 60 Hz DC Input Voltage Options: 12Vdc, 24Vdc, 48Vdc Efficiency (Typ.): Up to 89% (12V), 91% (24V), 93% (48V) No-Load Dissipation (Saving Mode): < 1.7W (Default disabled, auto-detects AC load > 10W) Working Temperature Range: −25 °C to +70 °C Protection Functions: DC input reverse polarity, low alarm, low shutdown, over-voltage; AC output short circuit, overload, over-temperature; Battery over-discharge protection Communication Support: RS-232 communication (via RJ11-RS232 cable) Dimensions (L x W x H): 420 mm x 270 mm x 98 mm Weight: 8.6 kg Safety & EMC Standards: CB IEC62368-1, Dekra BS EN/EN62368-1, UL458 (for TB type), E13, EAC TP TC 004, AS/NZS 62368.1, FCC Class A, BS EN/EN55032 Warranty: 3 years Information about the NTS-3200 Series The MEAN WELL NTS-3200 is a highly reliable off-grid true sine wave DC-AC power inverter featuring advanced digital design with MCU control, streamlined circuitry, and a high surge power capability up to 6400W. Designed to operate across a wide temperature range from −25 °C to +70 °C, it delivers clean power suitable for residential appliances, power tools, marine equipment, vehicles, and off-grid solar systems. The inverter features user-selectable AC output voltage and frequency via front-panel DIP switches, built-in remote ON-OFF control, RS-232 communication support, and comprehensive protection mechanisms. It accommodates lead-acid or lithium-ion batteries and provides multiple AC socket options (US, EU, CN, AU, UK, UN, and TB terminal blocks) to fit diverse global deployment needs.