TS-1000-224B Auslaufmodell

Technical Information & Details for MEAN WELL NTS-750-224EU Inverter Rated Power: 750 W (Continuous), 862 W (3 min.), 1125 W (10 sec.), 1500 W (Surge Peak/30 cycles) Output Voltage: 230 VAC (200 / 220 / 230 / 240 VAC selectable via DIP S.W) Output Frequency: 50 Hz / 60 Hz (selectable via DIP S.W) Waveform: True Sine Wave (THD < 3%) Input Voltage: 24 VDC (20 – 33 VDC) Efficiency: Up to 90% No-Load Power Dissipation: ≤ 1.5 W in standby saving mode (at load ≤ 10 W) Operating Temperature: −25 °C to +70 °C Cooling: Temperature controlled cooling fan Protections (Input): Reverse polarity, DC low alarm, DC low shutdown, over voltage, battery over discharge Protections (Output): Short circuit, overload, over temperature Isolation Voltage: 3000 VAC (Input to Output), 1500 VAC (Output to FG) Interfaces & Control: Remote ON-OFF control (Dry Contact), RS-232 communication port (via RJ11) AC Socket Type: EU Type (Type-EU) Dimensions (L x W x H): 270 mm x 158 mm x 67 mm Weight: approx. 2.3 kg Safety & EMC Standards: CB IEC62368-1, DEKRA BS EN/EN62368-1, UL458, E13, EAC, CE, UKCA LED Indicators: Front panel status indicators for operation, DC input, and load level Manufacturer Warranty: 3 Years Information about the MEAN WELL NTS-750-224EU The MEAN WELL NTS-750-224EU is a high-reliability off-grid 24V DC-AC power inverter featuring a European AC outlet, engineered to supply clean True Sine Wave AC power (THD < 3%) to sensitive electronic devices. Built with an advanced digital MCU controller and PCB conformal coating, this standalone inverter delivers stable 750 W continuous power with a high peak efficiency of up to 90%. It is designed to handle demanding startup transients with a maximum surge peak power of up to 1500 W. To support system integration, the unit includes an onboard RS-232 communication interface (via RJ11) and a dry-contact remote ON-OFF control connector. Its standby power-saving mode drops power draw to under 1.5 W, significantly reducing drain on connected 24V lead-acid or lithium battery systems. Featuring hardware DIP switches for effortless voltage and frequency configuration, a temperature-controlled cooling fan, and a wide operating temperature range of -25 °C to +70 °C, this inverter is an ideal power choice for commercial vehicles, marine vessels, off-grid solar setups, telecom systems, and field equipment.

Technical Information & Details for MEAN WELL NTU-1200-224EU Power Inverter Product Type: True Sine Wave DC-AC Inverter with Built-in UPS Function AC Output Socket: European Type (EU / Schuko Socket) DC Input Voltage: 24V DC (Operating Range: 20 - 33V DC) AC Output Voltage: 230V AC (Selectable: 200 / 220 / 230 / 240V AC via DIP SW) Output Frequency: 50 Hz (Selectable: 50 / 60 Hz via DIP SW) Rated Power (Continuous): 1200 W Peak / Surge Power: 1380 W (3 min.), 1800 W (10 sec.), 2000 W Surge Power (30 cycles) Output Waveform: True Sine Wave (THD < 3%) Efficiency: approx. 91% UPS / Bypass Transfer Time: 10 ms (typical) Supported Battery Types: Lead-acid or Lithium-ion batteries DC Input Protections: Reverse Polarity, Low Alarm, Low Shutdown, Over Voltage AC Output Protections: Short Circuit, Overload, Over Temperature Control & Communication: Remote ON-OFF control, RS-232 communication port (RJ11) Operating Temperature Range: -25°C to +70°C Dimensions & Weight: 333 x 184 x 70 mm (L x W x H) / 3.3 kg Manufacturer Warranty: 3 Years Information about the MEAN WELL NTU-1200-224EU The MEAN WELL NTU-1200-224EU is a high-performance 1200W DC-AC off-grid true sine wave power inverter with a built-in AC bypass UPS function. Operating from a 24V DC battery input, it converts direct current into clean 230V AC power with total harmonic distortion of less than 3%. This "EU" model comes equipped with a standard European Schuko AC receptacle. Featuring a rapid transfer time of typically 10 ms, the inverter ensures an uninterrupted power supply by automatically switching to inverter mode when the AC grid fails or fluctuates beyond limits. Output voltage (200V–240V AC), output frequency (50Hz/60Hz), and power-saving modes are easily adjustable via user-friendly DIP switches. Offering an efficiency rating of ~91%, a wide operating temperature range (-25°C to +70°C), RS-232 monitoring capability, and full electrical protection, it is an optimal choice for industrial backup systems, mobile homes, marine setups, and remote off-grid installations.

Technical Information & Details for MEAN WELL NTS-1200-224EU Power Inverter Continuous Output Power: 1200 W Peak Output Power: 1800 W (for 10 sec) / 2000 W Surge Power (for 30 cycles) AC Output Voltage: 230 V AC (Selectable 200 / 220 / 230 / 240 V AC via DIP SW, Default: 230 V AC) Output Frequency: 50 Hz (Selectable 50 / 60 Hz via DIP SW) Waveform: True Sine Wave (THD < 3%) DC Input Voltage: 24 V DC (Operating Range 20.0 – 33.0 V DC) Max. Input Current: 60 A Efficiency (Typ.): 92% AC Socket Type: EU Outlet (Type-EU) No Load Dissipation: ≤ 15 W (Non-saving mode), 1.2 W – 1.5 W in Standby Power Saving Mode DC Low Protection: Alarm at 22 ± 0.5 V DC; Shutdown at 20 ± 0.5 V DC DC High Protection: Alarm at 31 ± 0.5 V DC; Shutdown at 33 ± 0.5 V DC Protections: Short Circuit, Overload, Over Temperature, Battery Low Shutdown, Reverse Polarity (via internal fuse) Operating Temperature: −25 °C to +70 °C (Refer to derating curve) Cooling: Temperature-controlled, low acoustic noise cooling fan Control & Communication: Remote ON-OFF control, RS-232 communication via RJ11 port (Supports optional IRC1/IRC2/IRC3 controllers) Dimensions (L x W x H): 333 mm x 184 mm x 70 mm Weight: Approx. 3.3 kg Warranty: 3 Years Information about MEAN WELL NTS-1200-224EU The MEAN WELL NTS-1200-224EU is a highly reliable 1200W off-grid DC-to-AC power inverter designed with peak power capability up to 2000W. It converts 24V DC battery power (suitable for both lead-acid and lithium-ion batteries) into clean, true sine wave AC electricity (THD < 3%). Configured with a Type-EU output socket, it defaults to delivering 230 V AC at 50 Hz, with output voltage and frequency easily adjustable via DIP switches. Built for industrial and demanding off-grid environments, the NTS-1200 features MCU digital control, conformal coating, a wide operating temperature range from −25 °C to +70 °C, and comprehensive input/output protection mechanisms. It is widely used in trucks, buses, yachts, 24V off-grid solar systems, wireless networks, telecom equipment, and mobile power tools. Additionally, it includes an energy-saving mode (< 1.5W dissipation) and supports RS-232 monitoring as well as remote ON/OFF switching.