TS-1000-212B End of Life

Technical Information & Details for MEAN WELL NTS-750-212EU Inverter Rated Power: 750 W (Continuous), 862 W (3 min.), 1125 W (10 sec.), 1500 W (Surge Peak/30 cycles) Output Voltage: 230 VAC (200 / 220 / 230 / 240 VAC selectable via DIP S.W) Output Frequency: 50 Hz / 60 Hz (selectable via DIP S.W) Waveform: True Sine Wave (THD < 3%) Input Voltage: 12 VDC (10 – 16.5 VDC) Efficiency: Up to 89% No-Load Power Dissipation: ≤ 1.5 W in standby saving mode (at load ≤ 10 W) Operating Temperature: −25 °C to +70 °C Cooling: Temperature controlled cooling fan Protections (Input): Reverse polarity, DC low alarm, DC low shutdown, over voltage, battery over discharge Protections (Output): Short circuit, overload, over temperature Isolation Voltage: 3000 VAC (Input to Output), 1500 VAC (Output to FG) Interfaces & Control: Remote ON-OFF control (Dry Contact), RS-232 communication port (via RJ11) AC Socket Type: EU Type (Type-EU) Dimensions (L x W x H): 270 mm x 158 mm x 67 mm Weight: approx. 2.3 kg Safety & EMC Standards: CB IEC62368-1, DEKRA BS EN/EN62368-1, UL458, E13, EAC, CE, UKCA LED Indicators: Front panel status indicators for operation, DC input, and load level Manufacturer Warranty: 3 Years Information about the MEAN WELL NTS-750-212EU The MEAN WELL NTS-750-212EU is a highly reliable off-grid 12V DC-AC standalone power inverter equipped with an EU AC outlet, engineered to deliver premium True Sine Wave AC power (THD < 3%) to sensitive equipment. Built around an advanced digital MCU control design and protected by PCB conformal coating, this inverter ensures fast transient response and stable operation. Delivering 750 W of continuous power, it handles heavy motor loads and high start-up surges easily with a peak surge power capability of up to 1500 W. Designed for versatile deployment, it features a built-in RS-232 communication port via RJ11 for system monitoring alongside dry-contact remote ON-OFF functionality. In standby energy-saving mode, power consumption drops to under 1.5 W, drastically preserving connected 12V lead-acid or lithium-ion battery banks. Featuring hardware DIP switches for quick output voltage and frequency selection, a quiet temperature-regulated cooling fan, and a wide operating temperature range from -25 °C to +70 °C, this inverter is an ideal power choice for RVs, marine yachts, off-grid solar setups, telecom systems, and remote field applications.

Technical Information & Details for MEAN WELL NTU-1200-212EU Power Inverter Product Type: True Sine Wave DC-AC Inverter with Built-in UPS Function AC Output Socket: European Type (EU / Schuko Socket) DC Input Voltage: 12V DC (Operating Range: 10 - 16.5V DC) AC Output Voltage: 230V AC (Selectable: 200 / 220 / 230 / 240V AC via DIP SW) Output Frequency: 50 Hz (Selectable: 50 / 60 Hz via DIP SW) Rated Power (Continuous): 1200 W Peak / Surge Power: 1380 W (3 min.), 1800 W (10 sec.), 2000 W Surge Power (30 cycles) Output Waveform: True Sine Wave (THD < 3%) Efficiency: approx. 89% UPS / Bypass Transfer Time: 10 ms (typical) Supported Battery Types: Lead-acid or Lithium-ion batteries DC Input Protections: Reverse Polarity, Low Alarm, Low Shutdown, Over Voltage AC Output Protections: Short Circuit, Overload, Over Temperature Control & Communication: Remote ON-OFF control, RS-232 communication port (RJ11) Operating Temperature Range: -25°C to +70°C Dimensions & Weight: 333 x 184 x 70 mm (L x W x H) / 3.3 kg Manufacturer Warranty: 3 Years Information about the MEAN WELL NTU-1200-212EU The MEAN WELL NTU-1200-212EU is a high-reliability, 1200W off-grid DC-AC true sine wave power inverter equipped with an integrated AC bypass UPS function. Designed to operate from a 12V DC battery input, it outputs high-quality 230V AC power with low harmonic distortion (THD < 3%). This "EU" variant comes fitted with a standard European Schuko AC receptacle. Featuring a fast AC bypass switchover time of typically 10 ms, the inverter seamlessly transfers power from utility grid to battery source during AC power interruptions. Front-panel DIP switches allow users to easily adjust output voltage (200V–240V AC), frequency (50/60 Hz), and energy-saving modes. With its broad operating temperature range of -25°C to +70°C, RS-232 communication support, remote ON-OFF functionality, and comprehensive protection mechanisms, it is perfectly suited for emergency backup systems, vehicles, marine craft, solar installations, and field telecom equipment.

Technical Information & Details for MEAN WELL NTS-1200-212EU Power Inverter Continuous Output Power: 1200 W Peak Output Power: 1800 W (for 10 sec) / 2000 W Surge Power (for 30 cycles) AC Output Voltage: 230 V AC (Selectable 200 / 220 / 230 / 240 V AC via DIP SW, Default: 230 V AC) Output Frequency: 50 Hz (Selectable 50 / 60 Hz via DIP SW) Waveform: True Sine Wave (THD < 3%) DC Input Voltage: 12 V DC (Operating Range 10.0 – 16.5 V DC) Max. Input Current: 120 A Efficiency (Typ.): 89% AC Socket Type: EU Outlet (Type-EU) No Load Dissipation: ≤ 15 W (Non-saving mode), 1.2 W – 1.5 W in Standby Power Saving Mode DC Low Protection: Alarm at 11 ± 0.3 V DC; Shutdown at 10 ± 0.3 V DC DC High Protection: Alarm at 15.5 ± 0.3 V DC; Shutdown at 16.5 ± 0.3 V DC Protections: Short Circuit, Overload, Over Temperature, Battery Low Shutdown, Reverse Polarity (via internal fuse) Operating Temperature: −25 °C to +70 °C (Refer to derating curve) Cooling: Temperature-controlled, low acoustic noise cooling fan Control & Communication: Remote ON-OFF control, RS-232 communication via RJ11 port (Supports optional IRC1/IRC2/IRC3 controllers) Dimensions (L x W x H): 333 mm x 184 mm x 70 mm Weight: Approx. 3.3 kg Warranty: 3 Years Information about MEAN WELL NTS-1200-212EU The MEAN WELL NTS-1200-212EU is a highly reliable 1200W off-grid DC-to-AC power inverter designed with peak power capability up to 2000W. It converts 12V DC battery power (suitable for both lead-acid and lithium-ion batteries) into clean, true sine wave AC electricity (THD < 3%). Configured with a Type-EU output socket, it defaults to delivering 230 V AC at 50 Hz, with output voltage and frequency easily adjustable via DIP switches. Built for industrial and demanding off-grid environments, the NTS-1200 features MCU digital control, conformal coating, a wide operating temperature range from −25 °C to +70 °C, and comprehensive input/output protection mechanisms. It is widely used in RVs, yachts, off-grid solar systems, wireless networks, telecom equipment, and mobile power tools. Additionally, it includes an energy-saving mode (< 1.5W dissipation) and supports RS-232 monitoring as well as remote ON/OFF switching.