Technical Information & Details about the MEAN WELL HDR-30-24 Power Supply Output Power: 36 W Output Voltage: 24 V DC Output Current: 1.5 A Current Range: 0 – 1.5 A Input Voltage Range: 85 – 264 V AC (277 V AC operational) / 120 – 370 V DC (390 V DC operational), 47 – 63 Hz Efficiency: up to 89 % Ripple & Noise: ≤ 150 mVp-p Output Voltage Adjustment Range: 21.6 – 29 V DC Voltage Tolerance: ±1.0 % Line Regulation: ±1.0 % Load Regulation: ±1.0 % Setup, Rise Time: 500 ms, 50 ms @230 V AC / 115 V AC (full load) Hold-up Time: 30 ms @230 V AC / 12 ms @115 V AC (full load) Inrush Current: 25 A @115 V AC / 45 A @230 V AC (cold start) No-load Power Consumption: < 0.3 W Operating Temperature: −30 °C to +70 °C (with derating according to curve) Cooling: fanless free air convection Protection Functions: short circuit (hiccup mode, auto recovery), overload (constant current limiting 50–100 % of rated output voltage, auto recovery), overvoltage (shut down, re‑power to recover) Overvoltage Category: OVC III (up to 2000 m altitude) Isolation Voltage: 4000 V AC between input and output Isolation Resistance: ≥ 100 MΩ @ 500 V DC, 25 °C, 70 % RH Dimensions (W x H x D): 35 mm x 90 mm x 54.5 mm Weight: approx. 130 g Housing Material: insulating plastic, Class II Mounting: DIN rail TS35/7.5 or TS35/15 Safety & EMC Certifications: UL 62368-1, UL 508, TUV BS EN/EN 61558-2-16, BS EN/EN 61558-1, IEC 62368-1, EAC TP TC 004, BSMI, BIS IS13252, compliant with BS EN/EN 55032, BS EN/EN 55035, BS EN/EN 61000-6-2, BS EN/EN 61204-3 LED Indicator: Power On LED indicator Manufacturer Warranty: 3 years About the MEAN WELL HDR-30-24 The MEAN WELL HDR-30-24 is a 30 W ultra-slim DIN-rail power supply that provides a stable 24 V DC / 1.5 A output in a narrow 35 mm (2 SU) housing, ideal for compact distribution boards and space-saving control cabinets. With its wide 85–264 V AC / 120–370 V DC input range and high efficiency up to 89 %, it offers an energy-efficient 24 V control voltage source for building automation, home automation, and light industrial control systems. The adjustable 21.6–29 V output range allows precise tuning of the 24 V bus to compensate for voltage drops across wiring runs and to supply PLCs, sensors, relays, and I/O modules with reliable power. Its Class II plastic enclosure provides double insulation for enhanced user safety and simplifies installation by eliminating the need for a protective earth connection. Fanless free air convection, very low no-load power consumption below 0.3 W, a wide operating temperature range from −30 °C to +70 °C, and comprehensive protection and certification features make the HDR-30-24 a robust, long-life 24 V power solution for household and industrial automation applications.

Technical Information & Details for the MEAN WELL NGE65E48-P1J Power Supply Output Power: 65.2 W Output Voltage: 48 V DC Output Current: 1.36 A Input Voltage Range: 80 – 264 V AC / 113 – 370 V DC, 47 – 63 Hz Efficiency: approx. 92 % Ripple & Noise: ≤ 240 mVp-p Inrush Current: max. 50 A @115 VAC / 100 A @230 VAC No-Load Power Consumption: < 0.075 W Operating Temperature: −30 °C to +70 °C Cooling: fanless natural convection Protection Functions: Short circuit, Overload, Overvoltage Protection Class: Class II (without earth pin) Isolation Voltage: 4000 V AC between input and output Dimensions (L x W x H): 62 mm x 30 mm x 65 mm Weight: approx. 211 g Safety & EMC Approvals: CE, UKCA, CB, TUV, UL, EAC DC Connector: Hollow plug 5.5 x 2.1 mm (P1J) Manufacturer Warranty: 3 Years Information about the MEAN WELL NGE65E48-P1J The MEAN WELL NGE65E48-P1J is a high-performance wall-mounted plug-in power adapter featuring a fixed EU plug type, engineered specifically for reliable deployment across industrial, ITE, household, and medical sectors. Featuring an ultra-slim enclosure design with a width of just 30 mm, this power supply ensures that adjacent power outlets remain completely unblocked, making it an ideal choice for crowded power strips and tight spatial environments. Built as a Class II power unit without an earth pin, it adheres to rigorous international safety standards while delivering seamless operational flexibility. Key technical highlights include an efficiency of approx. 92 % alongside an exceptionally low no-load power consumption of less than 0.075 W, satisfying strict global energy efficiency mandates in both active and standby modes. Furthermore, the unit excels with a wide operating temperature range spanning from -30 °C to +70 °C and ultra-low leakage current characteristics for sensitive applications. Backed by robust electronic protections featuring specialized latch-off safety mechanisms and a reliable three-year manufacturer warranty, this adapter guarantees long-term operational stability and peace of mind.

Technical Information & Details about the MEAN WELL HDR-60-24 Power Supply Output Power: 60 W Output Voltage: 24 V DC Output Current: 2,5 A Current Range: 0 – 2,5 A Input Voltage Range: 85 – 264 V AC (277 V AC operational) / 120 – 370 V DC (390 V DC operational), 47 – 63 Hz Efficiency: up to 90 % Ripple & Noise: ≤ 150 mVp-p Output Voltage Adjustment Range: 21,6 – 29 V DC Voltage Tolerance: ±1,0 % Line Regulation: ±1,0 % Load Regulation: ±1,0 % Setup, Rise Time: 500 ms, 50 ms @230 V AC / 115 V AC (full load) Hold-up Time: 30 ms @230 V AC / 12 ms @115 V AC (full load) Inrush Current: 30 A @115 V AC / 60 A @230 V AC (cold start) No-load Power Consumption: < 0.3 W Operating Temperature: −30 °C to +70 °C (with derating according to curve) Cooling: fanless free air convection Protection Functions: short circuit (hiccup mode, auto recovery), overload (constant current limiting within 50–100 % of rated output voltage, auto recovery), overvoltage (shut down, re‑power to recover) Overvoltage Category: OVC III (up to 2000 m altitude) Isolation Voltage: 4000 V AC between input and output Isolation Resistance: ≥ 100 MΩ @ 500 V DC, 25 °C, 70 % RH Dimensions (W x H x D): 52,5 mm x 90 mm x 54,5 mm Weight: approx. 190 g Housing Material: insulating plastic housing, Class II, ultra slim step-shape Mounting: DIN rail TS35/7,5 or TS35/15 Safety & EMC Certifications: IEC 62368-1, UL 62368-1, UL 508, TUV BS EN/EN 61558-2-16, BS EN/EN 61558-1, EAC, BSMI, BIS IS13252, compliant with BS EN/EN 55032, BS EN/EN 55035, BS EN/EN 61000-6-2, BS EN/EN 61204-3 LED Indicator: Power On LED indicator Manufacturer Warranty: 3 years About the MEAN WELL HDR-60-24 The MEAN WELL HDR-60-24 is a 60 W ultra slim DIN-rail power supply that delivers a regulated 24 V DC / 2,5 A output in a compact 52.5 mm wide step-shape housing, ideal for space-constrained distribution boards and control cabinets. Its wide universal input range of 85–264 V AC or 120–370 V DC and high efficiency up to 90 % support energy-efficient operation in building automation, home control, and industrial control systems that rely on a stable 24 V bus. The adjustable 21,6–29 V output range allows precise tuning of the 24 V rail to compensate for voltage drops and to reliably power PLCs, sensors, relays, and I/O modules. The Class II plastic enclosure with reinforced insulation increases electrical safety and removes the need for a protective earth connection, simplifying installation and panel design. With fanless free air convection, very low no-load power consumption below 0.3 W, a wide operating temperature range from −30 °C to +70 °C, and comprehensive protection and certification features, the HDR-60-24 provides a robust, long-life 24 V power solution for demanding household and industrial automation applications.

Technical Information & Details of the MEAN WELL HDR-15-24 Power Supply Output Power: 15.2 W Output Voltage: 24 V DC Output Current: 0.63 A Output Current Range: 0 – 0.63 A Output Voltage Adjustment Range: 21.6 – 29 V DC Ripple & Noise: ≤ 150 mVp-p Voltage Tolerance: ±1.0 % Line Regulation: ±1.0 % Load Regulation: ±1.0 % Input Voltage Range: 85 – 264 V AC (277 V AC operational) / 120 – 370 V DC (390 V DC operational) Input Frequency: 47 – 63 Hz Efficiency (typ.): 86 % AC Input Current (typ.): 0.5 A @115 V AC / 0.25 A @230 V AC Inrush Current (typ.): 25 A @115 V AC / 45 A @230 V AC (cold start) No-load Power Consumption: < 0.3 W Overload Protection: 110 – 145 % of rated power, constant current limiting within 50 – 100 % of rated output voltage, hiccup mode when Vout < 50 %, auto recovery Overvoltage Protection: 30 – 36 V DC, shut off output, clamping by zener diode Operating Temperature: −30 °C to +70 °C (derating according to curve) Operating Humidity: 20 – 90 % RH, non-condensing Storage Temperature / Humidity: −40 °C to +85 °C, 10 – 95 % RH, non-condensing Temperature Coefficient: ±0.03 % / °C (0 – 50 °C) Vibration Resistance: 10 – 500 Hz, 2 G, 10 min./cycle, 60 min. per axis (X, Y, Z) Operating Altitude: up to 2,000 m (derating above 2,000 m) Isolation Voltage: 4 kVAC (input–output) Isolation Resistance: > 100 MΩ @500 VDC, 25 °C, 70 % RH Dimensions (W x H x D): 17.5 mm x 90 mm x 54.5 mm Weight: approx. 74 g Mounting: DIN rail TS35/7.5 or TS35/15, ultra-slim 1-SU step-shape housing Housing / Isolation Class: plastic housing, isolation Class II, LPS (Limited Power Source) Front Indicators / Controls: LED indicator for power on, adjustable DC output voltage Safety Approvals: UL62368‑1, UL508, TUV BS EN/EN61558‑2‑16, BS EN/EN61558‑1, IEC62368‑1, EAC TP TC 004, BSMI CNS15598‑1, BIS IS13252 (Part1) (except 48 V) EMC Emission: EN55032 (CISPR32), CNS15936 Class B; EN61000‑3‑2, EN61000‑3‑3 EMC Immunity: EN55035, EN61000‑6‑2, EN61204‑3; EN61000‑4‑2/3/4/5/6/8/11 MTBF (typ.): 3,724,300 h (Tel

Technical Information & Details for the MEAN WELL NGE65E05-P1J Power Supply Output Power: 30 W Output Voltage: 5 V DC Output Current: 6.0 A Input Voltage Range: 80 – 264 V AC / 113 – 370 V DC, 47 – 63 Hz Efficiency: approx. 84 % Ripple & Noise: ≤ 100 mVp-p Inrush Current: max. 50 A @115 VAC / 100 A @230 VAC No-Load Power Consumption: < 0.075 W Operating Temperature: −30 °C to +70 °C Cooling: fanless natural convection Protection Functions: Short circuit, Overload, Overvoltage Protection Class: Class II (without earth pin) Isolation Voltage: 4000 V AC between input and output Dimensions (L x W x H): 62 mm x 30 mm x 65 mm Weight: approx. 211 g Safety & EMC Approvals: CE, UKCA, CB, TUV, UL, EAC DC Connector: Hollow plug 5.5 x 2.1 mm (P1J) Manufacturer Warranty: 3 Years Information about the MEAN WELL NGE65E05-P1J The MEAN WELL NGE65E05-P1J is a high-performance wall-mounted plug-in power adapter featuring a fixed EU plug type, engineered specifically for reliable deployment across industrial, ITE, household, and medical sectors. Featuring an ultra-slim enclosure design with a width of just 30 mm, this power supply ensures that adjacent power outlets remain completely unblocked, making it an ideal choice for crowded power strips and tight spatial environments. Built as a Class II power unit without an earth pin, it adheres to rigorous international safety standards while delivering seamless operational flexibility. Key technical highlights include an efficiency of approx. 84 % alongside an exceptionally low no-load power consumption of less than 0.075 W, satisfying strict global energy efficiency mandates in both active and standby modes. Furthermore, the unit excels with a wide operating temperature range spanning from -30 °C to +70 °C and ultra-low leakage current characteristics for sensitive applications. Backed by robust electronic protections featuring automatic recovery and a reliable three-year manufacturer warranty, this adapter guarantees long-term operational stability and peace of mind.

Technical Information & Details for the MEAN WELL NGE65E24-P1J Power Supply Output Power: 65 W Output Voltage: 24 V DC Output Current: 2.71 A Input Voltage Range: 80 – 264 V AC / 113 – 370 V DC, 47 – 63 Hz Efficiency: approx. 92 % Ripple & Noise: ≤ 240 mVp-p Inrush Current: max. 50 A @115 VAC / 100 A @230 VAC No-Load Power Consumption: < 0.075 W Operating Temperature: −30 °C to +70 °C Cooling: fanless natural convection Protection Functions: Short circuit, Overload, Overvoltage Protection Class: Class II (without earth pin) Isolation Voltage: 4000 V AC between input and output Dimensions (L x W x H): 62 mm x 30 mm x 65 mm Weight: approx. 211 g Safety & EMC Approvals: CE, UKCA, CB, TUV, UL, EAC DC Connector: Hollow plug 5.5 x 2.1 mm (P1J) Manufacturer Warranty: 3 Years Information about the MEAN WELL NGE65E24-P1J The MEAN WELL NGE65E24-P1J is a high-performance wall-mounted plug-in power adapter featuring a fixed EU plug type, engineered specifically for reliable deployment across industrial, ITE, household, and medical sectors. Featuring an ultra-slim enclosure design with a width of just 30 mm, this power supply ensures that adjacent power outlets remain completely unblocked, making it an ideal choice for crowded power strips and tight spatial environments. Built as a Class II power unit without an earth pin, it adheres to rigorous international safety standards while delivering seamless operational flexibility. Key technical highlights include an efficiency of approx. 92 % alongside an exceptionally low no-load power consumption of less than 0.075 W, satisfying strict global energy efficiency mandates in both active and standby modes. Furthermore, the unit excels with a wide operating temperature range spanning from -30 °C to +70 °C and ultra-low leakage current characteristics for sensitive applications. Backed by robust electronic protections featuring automatic recovery and a reliable three-year manufacturer warranty, this adapter guarantees long-term operational stability and peace of mind.