• Output power: 151.2 W
• Output voltage: 36 V DC
• Rated output current: 4.2 A
• Output current range: 0 – 4.2 A
• Output characteristic: constant voltage mode
• Ripple & noise: max. 200 mVp-p
• Voltage tolerance: ± 1.0%
• Line regulation: ± 2.0%
• Load regulation: ± 5.0%
• Input voltage range: 180 – 305 V AC / 254 – 431 V DC, 47 – 63 Hz
• Efficiency (typical): 89%
• AC input current: 1.7 A @ 230 V AC / 1.5 A @ 277 V AC
• Inrush current (cold start): 60 A @ 230 V AC (twidth = 900 µs, 50% I_peak)
• Leakage current: max. 0.25 mA @ 240 V AC
• Setup & rise time: 500 ms, 50 ms @ 230 V AC / 277 V AC
• Hold-up time (typical): 18 ms @ 230 V AC / 20 ms @ 277 V AC (full load)
• Overload protection: 110 – 150% of rated output power, hiccup mode, auto recovery
• Over-voltage protection: 40 – 49 V DC, shutdown with automatic recovery after fault removal
• Over-temperature protection: output shutdown, automatic restart after cooling down
• Operating temperature: −25 °C to +65 °C (power derating according to derating curve)
• Operating humidity: 20 – 90% RH, non-condensing
• Storage temperature & humidity: −40 °C to +80 °C, 10 – 95% RH
• Temperature coefficient: ± 0.03% / °C (0 – 50 °C)
• Cooling: fanless design, cooling by free air convection
• Case material: fully insulated, flame-retardant plastic housing (UL 94V-0)
• Ingress protection: IP67
• Dielectric strength: 3,000 V AC (input to output)
• Insulation resistance: > 100 MΩ @ 500 V DC, 25 °C, 70% RH
• Vibration resistance: 10 – 500 Hz, 2 G, 10 min./cycle along each of the X, Y, Z axes
• MTBF: 3,361,200 h (Telcordia SR-332, 25 °C)
• Dimensions (L x W x H): 191 mm x 63 mm x 37.5 mm
• Weight: 0.79 kg
• Cable connections: primary SJTW 14 AWG, secondary SJTW 18 AWG, pre‑wired leads
• Recommended mounting: horizontal mounting, case type LPC-150 as per mechanical drawing
• Safety standards: UL 8750, CSA C22.2 No. 250.13-12, UL 879, CSA C22.2 No. 207-M89, IEC/EN 62368-1, EAC
• EMC standards: EN 55032 (CISPR 32) Class B, EN 55035, EN 61000-3-2 Class A (≤ 80% load), EN 61000-3-3, EN 61000-4-2/3/4/5/6/8/11
• Device class: Class II power unit, double insulated, no FG (earth) connection
• Application environment: suitable for indoor use or outdoor use without direct sunlight exposure
• Manufacturer warranty: 2 years

Information about MEAN WELL LPV-150-36

The MEAN WELL LPV-150-36 is a 150 W constant voltage LED power supply that delivers a regulated 36 V DC output at up to 4.2 A, making it well suited for medium-power 36 V LED modules, strips, and signage systems. Its key strengths include the fully encapsulated IP67-rated housing for reliable operation in dry, damp, and wet locations, the fanless free‑air convection design for silent and low‑maintenance operation, and the robust protection features against short-circuit, overload, over-voltage, and over-temperature with automatic recovery. With a wide 180–305 V AC input range, high efficiency of around 89%, and long service life, the LPV-150-36 is ideal for professional 36 V LED installations requiring dependable continuous operation in both indoor and protected outdoor environments.

Only for installation in devices whose primary use is other than lighting, e.g. copiers, overhead and slide projectors, or for scale and display lighting.