• Output Power: 96 W (at 200–305 V AC) / 70 W (at 100–180 V AC)
• Output Voltage: 48 V DC
• Output Current: 2.0 A
• Input Voltage Range: 100 – 305 V AC / 142 – 431 V DC, 47 – 63 Hz
• Efficiency: Up to 90%
• Ripple & Noise: ≤ 250 mVp-p
• Inrush Current: COLD START 60 A @ 230 V AC
• No Load / Standby Power: < 0.5 W
• Operating Temperature: −40 °C to +90 °C (Case temperature Tcase)
• Cooling: Fanless free air convection
• Protections: Short circuit (Hiccup mode), Overload (Constant current limiting), Over voltage, Over temperature
• Isolation Voltage: 3750 V AC between Input and Output
• Dimming & Adjustment: 3-in-1 dimming (0-10V, PWM, resistance) + internal Vo/Io potentiometers (AB-Type)
• Ingress Protection / Housing: IP65, Metal housing with Protective Earth (PE)
• Dimensions (L x W x H): 199 mm x 63 mm x 35.5 mm
• Weight: approx. 850 g
• Safety & EMC Standards: UL8750 (Type HL), EN61347-1, EN61347-2-13, EN55015, EAC, CB, CE
• AC Input Connection: 3-wire AC input cable with PE ground wire (3Y-Type)
• Warranty: 5 Years

Information about MEAN WELL ELG-100-48AB-3Y

Engineered for full lighting control customization, the MEAN WELL ELG-100-48AB-3Y pairs versatile 3-in-1 dimming (0-10V, PWM, resistance) protocols with built-in internal potentiometers for precise manual voltage and current tuning. Protected by a heavy-duty metallic body rated to IP65 ingress standards, it resists dust and low-pressure water jets during demanding outdoor operations. Thermal management is optimized to survive severe climate conditions, supporting a wide operating case temperature span from -40 °C to +90 °C. Built to 3Y specification, it includes a 3-wire AC input cable fitted with a dedicated PE safety ground conductor for code-compliant installations. The unit is fully certified under UL8750 (Type HL) for Class I, Division 2 hazardous locations and is covered by an extensive 5 years factory warranty.