Technical Information & Details for the MEAN WELL HLG-150H-15AB
Rated Power:150 W
Rated Voltage:15 V DC
Rated Current:10 A
Constant Current Region:7.5 – 15 V DC
Input Voltage Range:90 – 305 V AC / 127 – 431 V DC
Efficiency (typ.):92 %
Adjustability:Voltage (13.5–17V) & Current (6–10A) via internal potentiometers
Dimming Technology:3-in-1 dimming (1–10V DC, 10V PWM signal, or resistance)
IP Rating:IP65
Manufacturer Warranty:7 Years
Information about the MEAN WELL HLG-150H-15AB
The MEAN WELL HLG-150H-15AB represents the ultimate in control for 15V power applications. As an "AB-Type" hybrid, it features a dual-control interface: internal potentiometers for manual calibration of voltage and current during setup, and a dedicated 3-in-1 dimming line for remote regulation via 1-10V, PWM, or resistance.
Housed in a rugged IP65-rated aluminum enclosure, this driver is designed for mission-critical reliability in both indoor and outdoor environments. It is the premier choice for professional installations where on-site fine-tuning must be combined with automated building control systems. With an efficiency of 92% and a fanless design, it ensures silent operation and a long lifespan exceeding 62,000 hours.
Technical Information & Details about the MEAN WELL HDR-60-24 Power Supply
Output Power: 60 W
Output Voltage: 24 V DC
Output Current: 2,5 A
Current Range: 0 – 2,5 A
Input Voltage Range: 85 – 264 V AC (277 V AC operational) / 120 – 370 V DC (390 V DC operational), 47 – 63 Hz
Efficiency: up to 90 %
Ripple & Noise: ≤ 150 mVp-p
Output Voltage Adjustment Range: 21,6 – 29 V DC
Voltage Tolerance: ±1,0 %
Line Regulation: ±1,0 %
Load Regulation: ±1,0 %
Setup, Rise Time: 500 ms, 50 ms @230 V AC / 115 V AC (full load)
Hold-up Time: 30 ms @230 V AC / 12 ms @115 V AC (full load)
Inrush Current: 30 A @115 V AC / 60 A @230 V AC (cold start)
No-load Power Consumption: < 0.3 W
Operating Temperature: −30 °C to +70 °C (with derating according to curve)
Cooling: fanless free air convection
Protection Functions: short circuit (hiccup mode, auto recovery), overload (constant current limiting within 50–100 % of rated output voltage, auto recovery), overvoltage (shut down, re‑power to recover)
Overvoltage Category: OVC III (up to 2000 m altitude)
Isolation Voltage: 4000 V AC between input and output
Isolation Resistance: ≥ 100 MΩ @ 500 V DC, 25 °C, 70 % RH
Dimensions (W x H x D): 52,5 mm x 90 mm x 54,5 mm
Weight: approx. 190 g
Housing Material: insulating plastic housing, Class II, ultra slim step-shape
Mounting: DIN rail TS35/7,5 or TS35/15
Safety & EMC Certifications: IEC 62368-1, UL 62368-1, UL 508, TUV BS EN/EN 61558-2-16, BS EN/EN 61558-1, EAC, BSMI, BIS IS13252, compliant with BS EN/EN 55032, BS EN/EN 55035, BS EN/EN 61000-6-2, BS EN/EN 61204-3
LED Indicator: Power On LED indicator
Manufacturer Warranty: 3 years
About the MEAN WELL HDR-60-24
The MEAN WELL HDR-60-24 is a 60 W ultra slim DIN-rail power supply that delivers a regulated 24 V DC / 2,5 A output in a compact 52.5 mm wide step-shape housing, ideal for space-constrained distribution boards and control cabinets. Its wide universal input range of 85–264 V AC or 120–370 V DC and high efficiency up to 90 % support energy-efficient operation in building automation, home control, and industrial control systems that rely on a stable 24 V bus. The adjustable 21,6–29 V output range allows precise tuning of the 24 V rail to compensate for voltage drops and to reliably power PLCs, sensors, relays, and I/O modules. The Class II plastic enclosure with reinforced insulation increases electrical safety and removes the need for a protective earth connection, simplifying installation and panel design. With fanless free air convection, very low no-load power consumption below 0.3 W, a wide operating temperature range from −30 °C to +70 °C, and comprehensive protection and certification features, the HDR-60-24 provides a robust, long-life 24 V power solution for demanding household and industrial automation applications.
