• Output Power: 95.76 W (at 200–305 V AC) / 70 W (at 100–180 V AC)
• Output Voltage: 42 V DC
• Output Current: 2.28 A (dimmable 1.14–2.28 A)
• Input Voltage Range: 100 – 305 V AC / 142 – 431 V DC, 47 – 63 Hz
• Efficiency: Up to 90%
• Ripple & Noise: ≤ 250 mVp-p
• Inrush Current: COLD START 60 A @ 230 V AC
• No Load / Standby Power: < 0.5 W
• Operating Temperature: −40 °C to +90 °C (Case temperature Tcase)
• Cooling: Fanless free air convection
• Protections: Short circuit (Hiccup mode), Overload (Constant current limiting), Over voltage, Over temperature
• Isolation Voltage: 3750 V AC between Input and Output
• Dimming Control: 3-in-1 dimming (0–10 V DC, 10 V PWM signal, 100 kΩ resistance)
• Ingress Protection / Housing: IP67, Metal housing
• Dimensions (L x W x H): 199 mm x 63 mm x 35.5 mm
• Weight: approx. 850 g
• Safety & EMC Standards: UL8750 (Type HL), EN61347-1, EN61347-2-13, EN55015, EAC, CB, CE
• AC Input Connection: Standard 2-wire AC input cable
• Warranty: 5 Years

Information about MEAN WELL ELG-100-42B

Enhanced dimming flexibility characterizes the MEAN WELL ELG-100-42B, which incorporates a versatile 3-in-1 dimming control (0–10V, PWM, resistance) allowing smooth output power scaling. Housed in an IP67 sealed metal casing, it stands up to harsh conditions like dust storms or water immersion. Dissipating heat completely fanless through ambient air convection, silent operation is guaranteed across case temperatures from -40 °C to +90 °C. Certified under UL8750 (Type HL) for Class I, Division 2 hazardous zone applications, this driver includes a 5 years factory warranty.