Technical Information & Details for the MEAN WELL UHP-350-24 Power Supply Output Power: 350.4 W Output Voltage: 24 V DC Output Current: 14.6 A Input Voltage Range: 90 – 264 V AC / 127 – 370 V DC, 47 – 63 Hz Efficiency: 94% Ripple & Noise: ≤ 240 mVp-p Inrush Current: max. 30 A @115 VAC / 60 A @230 VAC No-Load Power Consumption: < 0.75 W Operating Temperature: −30 °C to +70 °C Cooling: Fanless natural convection Protections: Short circuit, Overload, Over voltage, Over temperature Overvoltage Category: OVC III Isolation Voltage: 3750 V AC input to output Dimensions (H x W x D): 220 mm x 62 mm x 31 mm Weight: approx. 680 g Safety & EMC Certificates: UL 62368-1, TUV BS EN/EN62368-1, BS EN/EN60335-1, EAC, CB, CE LED Indicator: Power On Indicator Manufacturer Warranty: 3 years Information about the MEAN WELL UHP-350-24 High-efficiency power delivery meets a ultra-slim 31 mm construction in this 24V industrial supply, engineered to maximize performance in confined control cabinets. Operating entirely without internal fans, it ensures absolute silence and exceptional reliability backed by a rigid 5G anti-vibration capability for mobile or heavy machinery. Designed to perform across punishing thermal environments, it supports an extended operating temperature range from -30 °C to +70 °C. Power integrity is further enhanced by robust surge tolerance against a 300 VAC surge input for 5 seconds, fulfilling global safety requirements backed by a solid 3-year warranty.

35W Schaltnetzteile 35W Single Output Switching Power Supply

Technical Information & Details for the MEAN WELL RS-15-12 Power Supply Output Power: 15.6 W Output Voltage: 12 V DC Output Current: 1.3 A Input Voltage Range: 85 – 264 V AC / 120 – 370 V DC, 47 – 63 Hz Efficiency: 81% Ripple & Noise: ≤ 120 mVp-p Inrush Current: Cold Start 65 A @ 230 VAC No Load Power Consumption: < 0.5 W Operating Temperature: −20 °C to +70 °C Cooling: Free air convection Protection Functions: Short circuit, Overload, Over voltage, Over temperature Isolation Voltage: 3000 V AC between input and output Dimensions (L x W x H): 62.5 mm x 51 mm x 28 mm Weight: 130 g Safety & EMC Certificates: UL, TUV, CB, EAC, CE, CCC LED Indicator: Power On Indicator Manufacturer Warranty: 3 Years Information about the MEAN WELL RS-15-12 The MEAN WELL RS-15-12 is a versatile 15.6W enclosed switching power supply engineered to provide a consistent 12V output for a wide range of industrial and commercial electronics. Its primary advantage is its miniaturized mechanical design, which allows it to be installed in extremely confined spaces where standard power units would be too bulky. Despite its small footprint, the RS-15-12 is built for high reliability, utilizing 105°C long-life electrolytic capacitors to ensure a stable and prolonged service life. The unit is designed to remain operational under stress, featuring the ability to withstand 300VAC surge inputs for 5 seconds and passing 5G vibration testing for superior mechanical durability. Equipped with a full-range universal AC input, the RS-15-12 is ready for deployment in international markets without the need for manual voltage selection. It offers a comprehensive safety suite, including hiccup-mode protection for overload conditions and Zener diode clamping to prevent over-voltage damage to connected equipment. This model is particularly efficient for modern green-energy requirements, maintaining a low no-load power consumption of less than 0.5W. With a broad operating temperature range up to 70°C and silent cooling through free air convection, it is an excellent choice for building automation, security systems, and telecommunications applications where maintenance-free performance is essential.

Technical Information & Details for the MEAN WELL LRS-150F-12 Power Supply Output Power: 150 W Output Voltage: 12 V DC Output Current: 12.5 A Input Voltage Range: 85 – 264 V AC / 120 – 370 V DC, 47 – 63 Hz Efficiency: 87.5 % Ripple & Noise: ≤ 100 mVp-p Inrush Current: 60 A @230 VAC (Cold Start) No Load Power Consumption: < 0.5 W Operating Temperature: −30 °C to +70 °C Cooling: Free air convection (fanless) Protection Functions: Short circuit, Overload, Over voltage, Over temperature Over Voltage Category: OVC III Isolation Voltage: 4000 V AC between Input and Output Dimensions (L x W x H): 159 mm x 97 mm x 30 mm Weight: 0.42 kg Safety & EMC Certificates: UL 62368-1, TUV EN 62368-1, EN 60335-1, AS/NZS 62368.1, GB 4943.1 LED Display: LED indicator for Power On Manufacturer Warranty: 3 Years Detailed Information on the MEAN WELL LRS-150F-12 The MEAN WELL LRS-150F-12 is a robust 150W single-output enclosed power supply designed with a low-profile 30mm 1U design. This miniature size makes it an ideal choice for space-constrained industrial and household applications. The unit features a full range universal AC input from 85 to 264VAC, ensuring global compatibility without the need for manual switching. Its high efficiency of 87.5% and metallic mesh case design facilitate excellent heat dissipation, allowing for fanless operation via free air convection across a wide temperature range of -30°C to +70°C. Engineered for high-reliability environments, the LRS-150F-12 can withstand 5G vibration tests and a 300VAC surge input for up to 5 seconds. It is compliant with international safety regulations including Over Voltage Category III (OVC III) and is certified for use in household appliances per EN 60335-1. With an extremely low no-load power consumption of less than 0.5W, it enables end systems to meet stringent worldwide energy requirements. This power supply serves as a high price-to-performance solution for industrial automation, control systems, and mechanical equipment, further supported by a 3-year manufacturer warranty.

Technische Eigenschaften des MEAN WELL HRPG-600-24 Nennleistung: 648 W AC-Eingangsbereich: 85 – 264 VAC Ausgangsspannung: 24 VDC 300 VAC Spannungsschwankungen widerstehen Aktive PFC-Funktion Built-in DC-OK-Signal Parallelschaltung von bis zu 4 Netzteile (2400 W)  Fernabtastung und On-/Off-Fernsteuerung Hoher Wirkungsgrad gegen 90% Schutz gegen Kurzschluss, Überlast und Überspannung Überhitzungsschutz EN62368-1, EN55032, EN61000-3-2, EN61000-3-3 Informationen zum MEAN WELL HRPG-600-24 Mit dem Modell HRP-600-24 stellt Mean Well ein kompaktes und robustes Direktmontage-Schaltnetzteil in geschlossener Bauform dar. Es verfügt über weltweit anwendbaren Weitbereichseingang zwischen 85 und 264 VAC (Derating bei 85 – 100 VAC) und liefert zudem eine geregelte Nennleistung von 648 W bei einem Strom von 27 A sowie einer vielfältig einsetzbaren 24 VDC Ausgangsspannung. Das Netzgerät von MeanWell ist für den Einbau in ein Endgerät versehen und kann 300 VAC Spannungsschwankungen für bis zu fünf Sekunden widerstehen. Die sämtliche Mean Well HRPG-600-Serie bietet weiterhin umfassende Funktionen und zeichnet sich durch die gute Arbeitseffizienz aus. Die Netzteile verfügen zudem über die Funktion von Fernabtastung (Remote Sense) sowie On-/Off-Fernsteuerung sowohl des Geräts als auch des Lüfters, dass die Modelle durch einen fernsteuerbaren Lüfter gekühlt werden. Außerdem sind die HRPG-600-Netzgeräte mit dem eingebauten DC-OK-Signal sowie der aktiven PFC-Funktion ausgestattet, welche für eine stabile Stromversorgung sorgt. Dabei kann die Produktreihe von Mean Well einen effizienten Betrieb mit einem gegen 90%-igen hohen Wirkungsgrad gewährleisten und erzeugt zudem einen geringen Standby-Verbrauch von weniger als 0,75 W.  Darüber hinaus sind die Schaltnetzteile der Mean Well HRPG-600-Serie kurzschlussfest und bieten einen Schutz gegen Überlast, Übertemperatur sowie Überspannung. Alle HRPG-600-Modelle von MeanWell sind konform mit den grundlegenden Sicherheitsnormen nach EN62368-1, EN55032, EN61000-3-2, EN61000-3-3 sowie weiteren Anforderungen.

Technical Information & Details for the MEAN WELL RSP-1000-24 Power Supply Output Power: 960 W Output Voltage: 24 V DC Output Current: 40 A Input Voltage Range: 90 – 264 V AC / 127 – 370 V DC, 47 – 63 Hz Efficiency: up to 88 % Ripple & Noise: ≤ 150 mVp-p Inrush Current: max. 40 A @230 VAC / 25 A @115 VAC Operating Temperature: −20 °C to +60 °C Cooling: Forced air cooling by built-in DC fan with fan speed control Protections: Short circuit, Overload, Over voltage, Over temperature Withstand Voltage: 3000 V AC between input and output (I/P-O/P) Dimensions (L x W x H): 295 mm x 127 mm x 41 mm (1U low profile) Weight: approx. 1.95 kg Safety & EMC Standards: UL62368-1, TUV BS EN/EN62368-1, CB, CE, EAC, UKCA Advanced Functions: Active current sharing up to 4000 W, Output voltage programmable Manufacturer Warranty: 5 years Information about the MEAN WELL RSP-1000-24 Engineered for high-power industrial setups, the enclosed MEAN WELL RSP-1000-24 unit delivers robust conversion performance inside a space-saving 1U low-profile enclosure. System architects benefit greatly from its built-in active current sharing capability, allowing multiple modules to run in parallel up to 4000 W for scalable power architectures. Furthermore, the unit supports remote voltage programming and control functions, giving engineers precise flexibility to adjust output parameters dynamically via external voltage or resistance configurations. Reliability is reinforced by comprehensive electronic safeguards and strict international compliance verified through UL62368-1 safety certifications. Thermal management is handled efficiently via an integrated speed-controlled cooling fan designed to maintain stable operation across demanding industrial cycles. Backed by a solid 5-year warranty, this power supply provides long-term operational dependability for factory automation, laser technology, and high-end testing instruments.