Technical Specifications & Details for MEAN WELL MDR-20-24 Power Supply Output Power: 24 W Output Voltage: 24 V DC Output Current: 1 A Input Voltage Range: 85 – 264 V AC / 120 – 370 V DC, 47 – 63 Hz Efficiency: 84% Ripple & Noise: ≤ 150 mVp-p Inrush Current: max. 20 A @115 VAC / 40 A @230 VAC No-load Power Consumption: < 0.75 W Operating Temperature: −20 °C to +70 °C Cooling: Free air convection Protections: Short circuit, Overload (Constant current limiting), Over voltage Isolation Voltage: 3000 V AC I/P to O/P Dimensions (W x H x D): 22.5 mm x 90 mm x 100 mm Weight: approx. 170 g Safety & EMC Certificates: UL 508, TUV BS EN/EN62368-1, EAC, CB, BSMI, IS13252 LED Indicator: Power On LED indicator Manufacturer Warranty: 3 Years  Information on the MEAN WELL MDR-20-24 The MEAN WELL MDR-20-24 is a highly reliable 24W power supply designed for seamless DIN rail integration in space-constrained industrial environments. Its ultra-slim 22.5mm width allows for maximum component density on TS-35/7.5 or 15 rails, making it a preferred choice for modern control panels. A key technical advantage of this model is the built-in DC OK active signal, which provides real-time feedback on the output status to higher-level monitoring systems or PLCs. Engineered for superior energy performance, it achieves an efficiency of 84% and maintains a no-load power consumption of less than 0.75W, significantly lowering the total cost of ownership and thermal dissipation. The unit employs a constant current limiting protection strategy, ensuring it remains robust during startup surges or temporary overloads and recovers automatically once conditions stabilize. With its maintenance-free fanless design and a full suite of global safety approvals, the MDR-20-24 provides a stable 24V DC foundation for automation, telecommunications, and building management systems.

Technische Eigenschaften des MEAN WELL APV-16-5 Nennleistung: 13 W Eingangsbereich: 90 bis 264VAC  Sekundärspannung: 5 VDC Kompakte Bauform Class II Netzteil Schutzart IP42 Kühlung durch freie Luftkonvektion Schutz vor Kurzschluss, Überspannung und Überlast Informationen zum MEAN WELL APV-16-5 Beim Mean Well APV-16-5 handelt es sich um ein kompaktes und robustes 13 W LED-Schaltnetzteil mit einer niedrigen Konstantspannung von 5 VDC. Eingangsseitig kann es mit einem weiten AC-Spannungsbereich zwischen 90 und 264 V (Derating bei 90 – 100 VAC) gespeist werden. Dabei beträgt der Ausgangsstrom 2,6 A. Die gesamte Produktreihe von MeanWell ist speziell für Niederspannungsanlagen wie z. B. dekorative LED-Leuchten sowie LED-Anzeigenschilder vorgesehen. Die Mean Well APV-16-Modelle zeichnen sich vor allem durch die Class II Zertifizierung sowie ein Design nach der Schutzart IP42 im Kunststoffgehäuse aus, welche einen ausreichenden Einsatz in verschiedensten Innenbereichen gewährleistet. Darüber hinaus verfügt die Produktreihe von MeanWell über die Kühlung durch freie Luftkonvektion. Die lüfterlose APC-16-Serie kann daher für eine ruhige Stromversorgung bei Betriebstemperaturen von -30 bis +70°C sowie bei einer relativen Luftfeuchtigkeit von 20% bis 90% sorgen.  Ausgangsseitig bieten die APV-16-Netzteile von Mean Well umfassende Schutzmaßnahmen gegen Kurzschluss, Überlast sowie Überspannung. Sie erfüllen weiterhin die grundlegenden Sicherheits- und Störfestigkeitsstandards gemäß UL8750, EN61000-3-2, EN55035 sowie weitere Normen für zuverlässige Versorgung für LED-Schaltnetzteile im Beleuchtungssektor.  Mit hoher Zuverlässigkeit sowie herausragender Kosteneffizienz ist die MeanWell APV-16-Serie die optimale Lösung für LED-Beleuchtungen mit Niederspannungen.

18W AC-DC Industriell Tischnetzteile 18W AC-DC Industrial Adaptor 85~264VACohne Netzkabel# C14# #15W#7,5VDC#2,0A# 93x54x36mmUL,TÜV,CB,CE,GS 

Technical Specifications & Details for MEAN WELL MDR-20-5 Power Supply Output Power: 15 W Output Voltage: 5 V DC Output Current: 3 A Input Voltage Range: 85 – 264 V AC / 120 – 370 V DC, 47 – 63 Hz Efficiency: 76% Ripple & Noise: ≤ 80 mVp-p Inrush Current: max. 20 A @115 VAC / 40 A @230 VAC No-load Power Consumption: < 0.75 W Operating Temperature: −20 °C to +70 °C Cooling: Free air convection Protections: Short circuit, Overload (Constant current limiting), Over voltage Isolation Voltage: 3000 V AC I/P to O/P Dimensions (W x H x D): 22.5 mm x 90 mm x 100 mm Weight: approx. 170 g Safety & EMC Certificates: UL 508, TUV BS EN/EN62368-1, EAC, CB, BSMI, AS/NZS LED Indicator: Power On LED Manufacturer Warranty: 3 Years Information on the MEAN WELL MDR-20-5 The MEAN WELL MDR-20-5 stands out as a premier industrial power solution designed for maximum spatial efficiency on TS-35/7.5 or 15 DIN rails. Its ultra-slim 22.5mm plastic chassis allows for high-density configurations in crowded control cabinets without sacrificing thermal performance. A unique characteristic of this series is the built-in DC OK active signal, which provides a reliable hardware interface for real-time status monitoring by PLCs or external monitoring systems. The unit is engineered for energy-conscious operations, featuring an impressively low no-load power consumption of less than 0.75W, meeting the demands of green energy standards. For protection, it utilizes a sophisticated constant current limiting circuit that permits the handling of startup surges while ensuring automatic recovery once fault conditions are cleared. This combination of industrial-grade durability, compact form factor, and advanced signaling makes it an essential component for telecommunications, point-of-sale systems, and smart factory applications where 5V stability is critical.

Technical Information & Details for the MEAN WELL TDR-480-48 Power Supply Output Power: 480 W Output Voltage: 48 V DC Output Current: 10 A Input Voltage Range: Three-Phase 340 – 550 V AC (Dual-phase possible) / 480 – 780 V DC Efficiency: 92.5 % Ripple & Noise: 150 mVp-p Inrush Current: Cold Start 50 A Power Factor: PF ≥ 0.9 / 400 V AC Operating Temperature: −30 °C to +70 °C Cooling: Free air convection Protection Functions: Short circuit, Overload, Over voltage, Over temperature Overload Protection: Constant current limiting (shuts down after 3 sec.) Isolation Voltage: 3000 V AC between Input and Output Dimensions (W x H x D): 85.5 mm x 125.2 mm x 128.5 mm Weight: 1.51 kg Safety & EMC Certificates: UL508, IEC 62368-1, EAC, BS EN/EN61000-6-2 Mounting: DIN Rail TS-35/7.5 or 15 Manufacturer Warranty: 3 Years Information about the MEAN WELL TDR-480-48 The MEAN WELL TDR-480-48 is a professional-grade 480W three-phase DIN rail power supply specifically engineered for high-voltage industrial applications requiring a stable 48V output. Its remarkably slim 85.5mm housing is a key characteristic, designed to maximize cabinet space and allow for higher component density in complex automation environments. A unique strength of this series is its versatile wide-range input (340 to 550VAC), which not only supports standard three-phase systems but also allows for dual-phase operation when derated, providing critical operational flexibility during phase failures or in specialized grid setups. Efficiency and reliability are central to the TDR-480-48, featuring a 92.5% efficiency rating and an active PFC function that ensures compliance with stringent harmonic current regulations. The unit utilizes a constant current limiting circuit for overload protection, which is a significant advantage when powering inductive or capacitive loads that typically cause startup issues for standard supplies. Built with a rugged metal housing and certified to UL508 and EN61000-6-2 industrial immunity levels, this power supply is optimized for semiconductor fabrication, factory automation, and electro-mechanical apparatus. The robust thermal design allows for fanless operation via free air convection, supported by a 3-year manufacturer warranty for long-term peace of mind.

Technical Information & Details for the MEAN WELL MDR-60-24 Power Supply Output Power: 60 W Output Voltage: 24 V DC Output Current: 2.5 A Input Voltage Range: 85 – 264 V AC / 120 – 370 V DC, 47 – 63 Hz Efficiency: 87% Ripple & Noise: ≤ 150 mVp-p Inrush Current: 30 A @ 115 VAC / 60 A @ 230 VAC No-load Power Consumption: < 0.75 W Operating Temperature: −20 °C to +70 °C Cooling: Fanless free air convection Protections: Short circuit, Overload (Constant current limiting), Over voltage Special Functions: DC OK relay contact Isolation Voltage: 3000 V AC I/P-O/P Dimensions (W x H x D): 40 mm x 90 mm x 100 mm Weight: 287 g Safety & EMC Certificates: UL508, UL62368-1, TUV EN62368-1, Class I Div 2 Hazardous Locations T4 LED Indicator: Power-On LED indicator Manufacturer Warranty: 3 Years Information about the MEAN WELL MDR-60-24 The MEAN WELL MDR-60-24 serves as a robust and highly efficient 24V power solution specifically tailored for industrial DIN rail applications[cite: 3, 4, 19]. Its compact 40mm design ensures it fits easily onto TS-35/7.5 or 15 rails, making it a perfect fit for crowded control panels[cite: 8, 19]. A standout feature is the built-in DC OK relay contact, which provides a simple yet effective way to monitor output health remotely[cite: 11, 66]. Engineered for harsh environments, it carries Class I, Div 2 hazardous location certification and operates reliably across a wide temperature range from -20 to +70°C[cite: 9, 19]. The power supply is designed with energy efficiency in mind, boasting an 87% typical efficiency and a no-load power consumption of less than 0.75W[cite: 12, 19]. Equipped with constant current limiting protection and automatic recovery, the MDR-60-24 guarantees long-term stability and minimal maintenance for critical automation tasks[cite: 19].