Technical Information & Details about the MEAN WELL HDR-30-24 Power Supply Output Power: 36 W Output Voltage: 24 V DC Output Current: 1.5 A Current Range: 0 – 1.5 A Input Voltage Range: 85 – 264 V AC (277 V AC operational) / 120 – 370 V DC (390 V DC operational), 47 – 63 Hz Efficiency: up to 89 % Ripple & Noise: ≤ 150 mVp-p Output Voltage Adjustment Range: 21.6 – 29 V DC Voltage Tolerance: ±1.0 % Line Regulation: ±1.0 % Load Regulation: ±1.0 % Setup, Rise Time: 500 ms, 50 ms @230 V AC / 115 V AC (full load) Hold-up Time: 30 ms @230 V AC / 12 ms @115 V AC (full load) Inrush Current: 25 A @115 V AC / 45 A @230 V AC (cold start) No-load Power Consumption: < 0.3 W Operating Temperature: −30 °C to +70 °C (with derating according to curve) Cooling: fanless free air convection Protection Functions: short circuit (hiccup mode, auto recovery), overload (constant current limiting 50–100 % of rated output voltage, auto recovery), overvoltage (shut down, re‑power to recover) Overvoltage Category: OVC III (up to 2000 m altitude) Isolation Voltage: 4000 V AC between input and output Isolation Resistance: ≥ 100 MΩ @ 500 V DC, 25 °C, 70 % RH Dimensions (W x H x D): 35 mm x 90 mm x 54.5 mm Weight: approx. 130 g Housing Material: insulating plastic, Class II Mounting: DIN rail TS35/7.5 or TS35/15 Safety & EMC Certifications: UL 62368-1, UL 508, TUV BS EN/EN 61558-2-16, BS EN/EN 61558-1, IEC 62368-1, EAC TP TC 004, BSMI, BIS IS13252, compliant with BS EN/EN 55032, BS EN/EN 55035, BS EN/EN 61000-6-2, BS EN/EN 61204-3 LED Indicator: Power On LED indicator Manufacturer Warranty: 3 years About the MEAN WELL HDR-30-24 The MEAN WELL HDR-30-24 is a 30 W ultra-slim DIN-rail power supply that provides a stable 24 V DC / 1.5 A output in a narrow 35 mm (2 SU) housing, ideal for compact distribution boards and space-saving control cabinets. With its wide 85–264 V AC / 120–370 V DC input range and high efficiency up to 89 %, it offers an energy-efficient 24 V control voltage source for building automation, home automation, and light industrial control systems. The adjustable 21.6–29 V output range allows precise tuning of the 24 V bus to compensate for voltage drops across wiring runs and to supply PLCs, sensors, relays, and I/O modules with reliable power. Its Class II plastic enclosure provides double insulation for enhanced user safety and simplifies installation by eliminating the need for a protective earth connection. Fanless free air convection, very low no-load power consumption below 0.3 W, a wide operating temperature range from −30 °C to +70 °C, and comprehensive protection and certification features make the HDR-30-24 a robust, long-life 24 V power solution for household and industrial automation applications.

Technical Information & Details about the MEAN WELL HDR-30-15 Power Supply Output Power: 30 W Output Voltage: 15 V DC Output Current: 2 A Current Range: 0 – 2 A Input Voltage Range: 85 – 264 V AC (277 V AC operational) / 120 – 370 V DC (390 V DC operational), 47 – 63 Hz Efficiency: up to 89 % Ripple & Noise: ≤ 120 mVp-p Output Voltage Adjustment Range: 13.5 – 18 V DC Voltage Tolerance: ±1.0 % Line Regulation: ±1.0 % Load Regulation: ±1.0 % Setup, Rise Time: 500 ms, 50 ms @230 V AC / 115 V AC (full load) Hold-up Time: 30 ms @230 V AC / 12 ms @115 V AC (full load) Inrush Current: 25 A @115 V AC / 45 A @230 V AC (cold start) No-load Power Consumption: < 0.3 W Operating Temperature: −30 °C to +70 °C (with derating according to curve) Cooling: fanless free air convection Protection Functions: short circuit (hiccup mode, auto recovery), overload (constant current limiting 50–100 % of rated output voltage, auto recovery), overvoltage (shut down, re‑power to recover) Overvoltage Category: OVC III (up to 2000 m altitude) Isolation Voltage: 4000 V AC between input and output Isolation Resistance: ≥ 100 MΩ @ 500 V DC, 25 °C, 70 % RH Dimensions (W x H x D): 35 mm x 90 mm x 54.5 mm Weight: approx. 130 g Housing Material: insulating plastic, Class II Mounting: DIN rail TS35/7.5 or TS35/15 Safety & EMC Certifications: UL 62368-1, UL 508, TUV BS EN/EN 61558-2-16, BS EN/EN 61558-1, IEC 62368-1, EAC TP TC 004, BSMI, BIS IS13252, compliant with BS EN/EN 55032, BS EN/EN 55035, BS EN/EN 61000-6-2, BS EN/EN 61204-3 LED Indicator: Power On LED indicator Manufacturer Warranty: 3 years About the MEAN WELL HDR-30-15 The MEAN WELL HDR-30-15 is a 30 W ultra-slim DIN-rail power supply that delivers a regulated 15 V DC / 2 A output in a compact 35 mm (2 SU) housing, making it ideal for narrow distribution boards and space-constrained control cabinets. With a wide 85–264 V AC / 120–370 V DC input range and high efficiency up to 89 %, it supports energy-efficient 15 V supply rails for building automation, home automation controllers, and light industrial control systems. The adjustable 13.5–18 V output range allows flexible tuning of the 15 V bus to compensate for wiring voltage drops and to supply relays, sensors, gateways, and I/O modules with stable power. Its Class II plastic enclosure provides double insulation for enhanced electrical safety and removes the need for a protective earth connection. Fanless free air convection, very low no-load power consumption below 0.3 W, a wide operating temperature range from −30 °C to +70 °C, and comprehensive protection and certification features make the HDR-30-15 a robust, long-life 15 V power solution for household and industrial automation applications.

Technical Information & Details about the MEAN WELL HDR-60-24 Power Supply Output Power: 60 W Output Voltage: 24 V DC Output Current: 2,5 A Current Range: 0 – 2,5 A Input Voltage Range: 85 – 264 V AC (277 V AC operational) / 120 – 370 V DC (390 V DC operational), 47 – 63 Hz Efficiency: up to 90 % Ripple & Noise: ≤ 150 mVp-p Output Voltage Adjustment Range: 21,6 – 29 V DC Voltage Tolerance: ±1,0 % Line Regulation: ±1,0 % Load Regulation: ±1,0 % Setup, Rise Time: 500 ms, 50 ms @230 V AC / 115 V AC (full load) Hold-up Time: 30 ms @230 V AC / 12 ms @115 V AC (full load) Inrush Current: 30 A @115 V AC / 60 A @230 V AC (cold start) No-load Power Consumption: < 0.3 W Operating Temperature: −30 °C to +70 °C (with derating according to curve) Cooling: fanless free air convection Protection Functions: short circuit (hiccup mode, auto recovery), overload (constant current limiting within 50–100 % of rated output voltage, auto recovery), overvoltage (shut down, re‑power to recover) Overvoltage Category: OVC III (up to 2000 m altitude) Isolation Voltage: 4000 V AC between input and output Isolation Resistance: ≥ 100 MΩ @ 500 V DC, 25 °C, 70 % RH Dimensions (W x H x D): 52,5 mm x 90 mm x 54,5 mm Weight: approx. 190 g Housing Material: insulating plastic housing, Class II, ultra slim step-shape Mounting: DIN rail TS35/7,5 or TS35/15 Safety & EMC Certifications: IEC 62368-1, UL 62368-1, UL 508, TUV BS EN/EN 61558-2-16, BS EN/EN 61558-1, EAC, BSMI, BIS IS13252, compliant with BS EN/EN 55032, BS EN/EN 55035, BS EN/EN 61000-6-2, BS EN/EN 61204-3 LED Indicator: Power On LED indicator Manufacturer Warranty: 3 years About the MEAN WELL HDR-60-24 The MEAN WELL HDR-60-24 is a 60 W ultra slim DIN-rail power supply that delivers a regulated 24 V DC / 2,5 A output in a compact 52.5 mm wide step-shape housing, ideal for space-constrained distribution boards and control cabinets. Its wide universal input range of 85–264 V AC or 120–370 V DC and high efficiency up to 90 % support energy-efficient operation in building automation, home control, and industrial control systems that rely on a stable 24 V bus. The adjustable 21,6–29 V output range allows precise tuning of the 24 V rail to compensate for voltage drops and to reliably power PLCs, sensors, relays, and I/O modules. The Class II plastic enclosure with reinforced insulation increases electrical safety and removes the need for a protective earth connection, simplifying installation and panel design. With fanless free air convection, very low no-load power consumption below 0.3 W, a wide operating temperature range from −30 °C to +70 °C, and comprehensive protection and certification features, the HDR-60-24 provides a robust, long-life 24 V power solution for demanding household and industrial automation applications.

Technical Information & Details for the MEAN WELL SDR-240-24 Power Supply Output Power: 240 W (360 W Peak for 3 seconds) Output Voltage: 24 V DC Output Current: 10 A Input Voltage Range: 88 – 264 V AC / 124 – 370 V DC, 47 – 63 Hz Efficiency: up to 94 % Ripple & Noise: ≤ 50 mVp-p Inrush Current: 33 A @ 115 VAC / 55 A @ 230 VAC Power Factor: PF > 0.93 Operating Temperature: −25 °C to +70 °C Cooling: Free air convection (fanless) Protections: Short circuit, Overload, Over voltage, Over temperature DC OK Signal: Built-in DC OK relay contact Isolation Voltage: 3000 V AC between Input and Output Dimensions (W x H x D): 63 mm x 125.2 mm x 113.5 mm Weight: 1.03 kg Safety & EMC Certificates: UL 508, TUV BS EN/EN62368-1, EAC, CE, CB LED Display: Power On Indicator Manufacturer Warranty: 3 Years Information about the MEAN WELL SDR-240-24 The MEAN WELL SDR-240-24 is a high-performance industrial power supply designed for DIN rail mounting, offering an exceptional efficiency of up to 94%. This high efficiency significantly reduces power dissipation and heat generation, allowing the unit to operate reliably through free air convection without the need for active cooling fans. A standout characteristic is its 150% peak load capability, which enables the power supply to deliver up to 360W for 3 seconds. This feature is particularly crucial for industrial applications involving inductive or capacitive loads that require a high initial startup current, ensuring system stability without over-dimensioning the entire power architecture. Beyond its raw power, the SDR-240-24 features built-in active PFC function (Power Factor Correction), ensuring compliance with harmonic current regulations and optimizing energy usage. The slim 63mm width design saves critical space on the TS-35/7.5 or 15 rail, making it an ideal choice for crowded control cabinets. For enhanced system monitoring, it includes a DC OK relay contact, providing a simple way to integrate status signals into a PLC or supervisory system. With comprehensive industrial immunity levels and a rugged metal housing, this unit is perfectly suited for heavy-duty automation, telecommunications, and renewable energy environments where reliability and long-term durability are non-negotiable.

Technical Information & Details for the MEAN WELL SDR-960-48 Power Supply Output Power: 960 W (Peak 1248 W) Output Voltage: 48 V DC Output Current: 20 A Input Voltage Range: 180 – 264 V AC / 254 – 370 V DC, 47 – 63 Hz Efficiency: 94 % Ripple & Noise: 250 mVp-p Inrush Current: 50 A @ 230 VAC No Load Power Consumption: Low power dissipation design Operating Temperature: -30 °C to +70 °C Cooling: Free air convection Protections: Short circuit, Overload, Over voltage, Over temperature Overvoltage Category: OVC II Isolation Voltage: 3000 V AC between input and output Dimensions (H x W x D): 125.2 mm x 110 mm x 150 mm Weight: 2.47 kg Safety & EMC Certificates: UL508, TUV BS EN/EN62368-1, EAC, CE LED Indicator: DC OK status indication Manufacturer Warranty: 3 Years Information about the MEAN WELL SDR-960-48 The MEAN WELL SDR-960-48 is a high-performance industrial power supply designed for DIN rail mounting, offering a robust 48V output at 20A. A standout technical achievement of this series is its 94% typical efficiency, which minimizes heat generation and allows the unit to operate reliably using only free air convection cooling. For applications involving heavy startup loads, the SDR-960-48 features a remarkable 130% peak load capability, providing up to 1248 Watts of power for 3 seconds. This overhead ensures that the system can handle temporary surges from motors or large capacitive banks without shutting down, maintaining operational continuity in complex industrial processes. Despite its massive power output, the unit maintains a slim 110mm width, optimizing space on the TS-35 mounting rail. It is equipped with built-in active PFC to ensure compliance with harmonic current standards and features active current sharing functionality, allowing for the parallel connection of up to 4 units to reach a total output of 3840 Watts. Safety is paramount, as the unit is UL508 approved for industrial control equipment and includes a DC OK relay contact for integrated system monitoring. This combination of efficiency, surge power, and parallel scalability makes the SDR-960-48 an ideal choice for heavy-duty automation and large-scale industrial power distribution.

Technische Informationen & Details zum MEAN WELL SDR-480-48 Netzteil Ausgangsleistung: 480 W (720 W Spitze für 3 Sekunden) Ausgangsspannung: 48 V DC Ausgangsstrom: 10 A Eingangsspannungsbereich: 90 – 264 V AC / 127 – 370 V DC Wirkungsgrad: 94 % Restwelligkeit & Rauschen: ≤ 120 mVp-p Einschaltstrom: 40 A @ 115 VAC / 80 A @ 230 VAC Leistungsfaktor: PF > 0,94 Betriebstemperatur: -25 °C bis +70 °C Kühlung: Lüfterlose natürliche Konvektion Schutzfunktionen: Kurzschluss, Überlast, Überspannung, Übertemperatur Einstellbereich Spannung: 48 – 55 V Isolationsspannung: 3000 V AC Eingang-Ausgang Maße (B x H x T): 85,5 mm x 125,2 mm x 128,5 mm Gewicht: 1,6 kg Sicherheits- & EMV-Zertifikate: UL 508, TUV EN62368-1, BS EN/EN61000-6-2, EAC, CE Statusanzeige: DC-OK-Relaiskontakt und LED-Anzeige Herstellergarantie: 3 Jahre Informationen zum MEAN WELL SDR-480-48 Das MEAN WELL SDR-480-48 ist ein hocheffizientes Industrie-Netzteil für die DIN-Schiene, das speziell für maximale Leistung auf engstem Raum entwickelt wurde. Mit einem Wirkungsgrad von 94 % arbeitet das Gerät äußerst energieeffizient, wodurch die Wärmeentwicklung so gering bleibt, dass eine Kühlung durch freie Luftkonvektion ohne mechanische Lüfter ausreicht. Ein besonderes Highlight für industrielle Anwendungen ist die 150 % Peak-Load-Fähigkeit, die es dem Netzteil ermöglicht, kurzzeitig eine Spitzenleistung von 720 Watt für bis zu 3 Sekunden abzurufen. Diese Reserve ist entscheidend für den stabilen Anlauf von Motoren oder anderen Lasten mit hohen Einschaltströmen. Für den Einsatz in anspruchsvollen Umgebungen verfügt das SDR-480-48 über eine integrierte aktive PFC-Funktion und einen DC-OK-Relaiskontakt zur einfachen Fernüberwachung des Systemzustands. Das Netzteil ist nach UL 508 für industrielle Steuerungssysteme zertifiziert und erfüllt höchste Anforderungen an die Störfestigkeit im Industriebereich. Die schmale Bauform von nur 85,5 mm Breite spart wertvollen Platz im Schaltschrank, während umfassende Schutzmechanismen gegen Kurzschluss, Überspannung und Übertemperatur sowie eine Konstantstrombegrenzung für höchste Betriebssicherheit und Langlebigkeit sorgen.